• 한국지반환경공학회 논문집
• /
• 제9권1호
• /
• pp.27-31
• /
• 2008

본 연구는 직경 225mm의 KICT 대구경 샘플러와 NX size 피스톤 샘플러를 사용하여 채취한 점토시료의 강도정수를 비교하여 대구경 샘플러가 NX size 피스톤 샘플러에 비해 원지반 상태를 얼마나 잘 반영하는가를 평가하는데 그 목적이 있다. 이 연구를 위하여 두 가지 샘플러로 채취한 점토 시료를 동일 조건에서 표준압밀시험, 일축압축시험, 삼축압축시험을 수행하여 채취 시료의 교란도 분석을 하였다. 분석결과 초기간극비와 선행압밀응력 뿐만 아니라 시료의 일축 및 삼축압축 시험에 의한 강도정수도 KICT 대구경 샘플러에 의한 시료가 약 10% 이상 높게 나타났다.

• 한국지반공학회논문집
• /
• 제30권5호
• /
• pp.67-75
• /
• 2014

본 연구에서는 벤더엘리먼트가 장착된 삼축시험장비를 이용하여 모래에 대한 일련의 압밀배수시험을 수행하여 응력, 변형률, 그리고 전단파속도를 측정하였으며 이로부터 전단강도와 포아송비의 특성을 분석하였다. 분석 결과, 전단파속도로부터 계산된 최대전단탄성계수와 파괴시의 축응력과 반경방향 응력의 합으로 정의되는 유효수직응력과는 고유한 상관관계가 존재하는 것으로 나타났다. 도출된 경험식은 전단파속도와 전단강도 그리고 마찰각간의 상관관계를 나타내므로 매우 유용하다고 판단된다. 나아가 본 연구에서는 측정된 축변형률과 체적변형률로부터 모래의 포아송비를 측정하였다. 포아송비는 변형률과 체적변화에 큰 영향을 받으며 0.15~0.6까지 변형률에 따라서 크게 증가하는 것으로 나타났다. 특히 0.2% 미만의 축변형률에서는 대략 0.25~0.4으로 기존 문헌에서 제시된 0.3~0.35를 크게 벗어나지 않지만 1% 이상의 변형률에서는 0.5~0.6으로 문헌에서 제시된 값은 포아송비를 크게 과소예측하는 것으로 나타났다.

• 한국지반신소재학회논문집
• /
• 제5권1호
• /
• pp.15-23
• /
• 2006

모래다짐말뚝 및 쇄석말뚝 공법의 경우, 연약지반의 보강, 극한지지력의 증대 및 기초지반의 압밀을 가속화시키기 위한 목적으로 지난 수십 년간 폭넓게 적용되고 있다. 쇄석말뚝공법은 비교적 강성이 크고 압축성이 작은 쇄석 등을 이용하여 다짐말뚝을 형성, 연약지반을 개량하는 공법이지만 횡방향 구속압력이 충분하게 발휘되지 않는 지반에서는 팽창파괴(bulging failure)에 대한 저항이 없어 적용이 불가능하게 된다. 따라서 본 연구에서는 쇄석말뚝의 활용도를 높이기 위해 팽창파괴 및 전단파괴 등을 방지하여 침하량을 상당부분 억제시킬 수 있는 고강도 지오그리드 보강 쇄석말뚝공법을 개발하였다. 본 공법 개발을 위해 삼축압축시험을 통하여 치환율 및 구속압력에 따른 일반적인 쇄석말뚝의 거동특성을 우선 살펴보았다. 아울러 유한요소 해석을 통한 3차원 수치해석을 시행하여 지오그리드의 종류 및 지오그리드 보강심도변화에 따른 지오그리드 보강 쇄석말뚝공법의 거동특성 및 침하저감효과를 평가함으로써 지오그리드 보강 쇄석말뚝의 적용성을 평가해 보았다.

• 한국산업융합학회 논문집
• /
• 제15권1호
• /
• pp.21-27
• /
• 2012

Decomposed granite soils are in a wide range of conditions depending on the degrees of weathering. This paper is intended to examine laboratory tests such as consolidation tests and conventional triaxial compression tests conducted in order to find out the mechanical properties of Cheongju granite soil. Along with the foregoing, the results of basic physical tests conducted in order to grasp the physical properties of Cheongju granite soil were described and based on the results, methods to calculate the mechanical parameters of numerical approaches using Lade's double surface work-hardening constitutive model were examined. Finally, it is intended to explain the stress properties of Cheongju granite soil used as a geotechnical material based on its shear behavior and critical state concept using the results of isotropic consolidation tests and triaxial compression tests. As a conclusion, it can be seen that in the relationship between confining stress and maximum deviator stress, the slope is maintained at a constant value of 2.95. In the drained CTC test, maximum deviator stress generally existed in a range of axial strain of 6~8% and larger dilatancy phenomena appeared when confining stress was smaller. Finally, based on the results of the CTC tests on Cheongju granite soil, although axial strain, deviator stress and pore water pressure showed mechanical properties similar to those of overconsolidated soil, Cheongju granite soil showed behavior similar to that of normally consolidated soil in terms of volumetric strain.

• 한국지반신소재학회논문집
• /
• 제9권3호
• /
• pp.29-37
• /
• 2010

본 연구는 육상과 접해있는 해상에 퇴적된 입자가 매우 균등한 실트섞인 세립질 모래지반의 공학적인 특성을 평가하기 위하여 새만금지역에서 시료를 채취하였다. 채취한 시료에 대하여 상대밀도 시험을 통해 최소 및 최대밀도시험을 하였으며 상대밀도별 사질토의 변형특성과 전단특성을 평가하기 위하여 로우셀압밀시험 및 비배수 삼축압축시험을 실시하였다. 실험결과 상대밀도에 따라서 약간씩 차이는 있지만 새만금지역 해상사질토의 최대 압축 가능한 간극비는 0.88정도이며, 최대 다짐 가능한 상대밀도는 약 71%정도로 평가 되었다. 또한 내부마찰각은 상대밀도의 증가에 따라서 선형적으로 증가하는 양상을 보였으며 기 연구된 군장항에 퇴적된 사질토의 특성과 매우 유사한 전단거동을 보였다.

• 산업기술연구
• /
• 제17권
• /
• pp.119-124
• /
• 1997

This thesis is an experimental research of shear behavioral characteristics and shear behavioral coefficient of weathered residual soil which is mostly contained in soil of Korea. Using the weathered residual soil from mountain near Kangwon National University, this experimental research were contained the physical properties of sample in term of the basic test method such as specific gravity, plastic and liquid limit, grain-size distribution, density and water content. Experimental results obtained from direct shear test sand triaxial compression tests show that according to step loading, linear strain and linear stress increase continually and angle of internal friction decreases just little according to incresing of water content in case of ignoring the cohesion, and angle of internal friction appears the maximum angle near a optimum moisture content in case of considering the cohesion.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.382-387
• /
• 1998

Triaxial compression tests were run to study on the undrained strength characteristics of fiber mixed kaolin clay(Hadong). The influence of various test parameters such as amount and aspect ratio(ratio of length to diameter) of fiber, confining stress was also investigated. Test results showed that the increase in aspect ratio was increased in deviator stress at failure, but no effect on pore water pressure at failure. Deviator stress at failure was also increased at 0.5％ mixing ratio(weight fraction of fiber to that of soil solid) of fiber but it was, thereafter, decreased and wits reached to constant after 2％ mixing ratio. On the contrary, Pore water pressure at failure was increased as mixing ratio of fiber was greater than 1%. Deviator stress and pore water pressure of both clay and fiber mixed clay(FMC) at failure were increased as confining stress was increased. Deviator stress of FMC at failure was about 10％ larger than that of clay, but pore water pressure of FMC at failure was almost similar to that of clay.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.673-678
• /
• 2010

In this paper, the limit load of granular materials was evaluated considering unsaturated shear strength. The unsaturated shear strength parameters were estimated using the results from triaxial compression test and soil-water characteristic curves test. In addition, the limit load of different rates of materials was compared. Also, two important design parameters, yield and failure load were defined utilizing 2-D nonlinear finite element analysis respectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1313-1323
• /
• 2008

The purpose of this study is to understand behaviors of slopes and determine soil parameters of slopes through the triaxial compression test and the direct shear test. Following results were obtained by comparing and analyzing model tests and analysis programs of slope stability. The safety factors of the Bishop's simple method, the Morgenstern Price method, the Spencer method and the GLE method were similar to each other but safety factors of the Fellenius method and the Janbu method were different from the formers. It was found that the Bishop's simple method, the Morgenstern Price method, the Spencer method and the GLE method could be used for design but attention should be paid to the Fellenius method and the Janbu method since they underestimated safety factor.

• 한국농공학회논문집
• /
• 제51권1호
• /
• pp.11-20
• /
• 2009

Flow pump technique was used in order to determine the soil-water characteristic curve of weathered granite soils in Pocheon area. This technique enables measurement to be more convenient and accurate as it is based on the CU condition of triaxial compression test. Besides, it is also able to measure dry and moisture curves continuously since the test is controled by means of a computer automatically. In this study, not only a hydraulic conductivity of weathered granite soils at fully saturated state in Pocheon area, but also a soil-water characteristic curve throughout unsaturate flow tests were determined. In addition, Brooks and Corey's model and Genuchten's model were used to simulate the soil-water characteristic curve. On the basis of the simulation an unsaturate hydraulic conductivity was predicted.