• 한국정밀공학회지
• /
• 제9권1호
• /
• pp.44-52
• /
• 1992

A post-processor is developed to be effectively usable in the personal computer. 3-dimensional controur lines are shown on the surface of the finite element model and also on the 3-dimensional cutting plane, using the function linearly interpolated onto the triangular elements which are constructed on the surface or sectional polygons. And these polygons are originated from the finite element model, 3-dimensional model is projected on the plane with hidden line removal by comparision technique[6]. The graphic data file is used to increase the protability of the program. It is easy to use in the other computer system if the graphic routine adopted that computer system is developed. The developed program has wide applications in 3-dimensional finite element analysis.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.143-148
• /
• 2004

The numerical analysis of the hard disk drive slider is presented. The pressure distribution was calculated using the finite element method. The generalized Reynolds equation was applied in order to include the gas rarefaction effect. The balance of the air bearing force and preload force was considered. The characteristics of the small vibrations near the equilibrium were studied using the perturbation method. Triangular mesh with variable element size was employed to model the two-rail slider. The flying height, pitching angle, rolling angle, stiffness and damping of the two-rail slider were calculated for radial position changing from the inner radius to the outer radius and for a wide range of the slider crown values. It was found that the flying height, pitching angle and rolling angle were increased with radial position while the stiffness and damping coefficients were decreased. The higher values of crown resulted in increased flying height, pitching angle and damping and decreased stiffness.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1320-1323
• /
• 1996

This paper describes an interpolation method for a parametric surface. A parametric surface is approximated to triangular mesh surfaces and then the basic paths are achieved. As the generated path is a series of linear segments, this algorithm can be easily adapted to general NC controllers. The generated paths have minimal transfer length and are gouge-free within the approximation tolerance. The problems, induced when the paths are represented by linear segments, are overcome without making any path deviation by this algorithm. This algorithm saves machining time by eliminating overdetermined tool paths and keeping the desired average feedrate, which improve productivity and lead to lower production costs.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 추계 학술대회논문집
• /
• pp.36-41
• /
• 1998

The cross-flow fan performance and its sound noise characteristics are predicted by computational methods. The unsteady incompressible Navier-Stokes equations in moving coordinates are solved by a SMAC method on unstructured triangular meshes, using a sliding mesh technique at the interface between the domain rotating with blades and the rest stationary part. The computationally predicted fan performance was favorably compared with experiment, and some numerical aspects of simulating the cross-flow fan are discussed. With the computed unsteady flow field, aeroacoustic sound noise of the fan is predicted by the Lighthill-Curie equation. The unsteady surface pressure fluctuations on stabilizer enables a prediction of BPF noise of the uniform pitch blade fan quite accurately. The aeroacoustic sound noise characteristics of both uniform and random pitch blade fans are also examined by SPL spectrum analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.597-601
• /
• 1996

Nowadays, the STL format, industrial standard data, which approximates three dimensional CAD model to triangular facets, is used for RP(Rapid Prototyping) system. Because most RP machine is accpted to only two dimensional line segments, but some STL translators are sometimes poorly implemented. The error verifying process is as follows. 1) Remove facets with two or more vertices equal to each other. 2) Fix overlapping error such as more than three facets adjacent to an edge. 3) Fill holes in the mesh by using Delaunay triangulation method. 4) Repair wrong direction and value of normal vectors. This paper is concerned with searching the mentioned errors in advance and modifying them.

• 한국CDE학회논문집
• /
• 제13권6호
• /
• pp.450-458
• /
• 2008

Recently, Cartesian grid approach has been popular to generate grid meshes for complex geometries in CFD (Computational Fluid Dynamics) because it is based on the non-body-fitted technique. This paper presents a method of an octree generation and boundary cell clipping using section curves for fast octree generation and elimination of redundant intersections between boundary cells and triangles from 3D triangular mesh. The proposed octree generation method uses 2D Scan-Converting line algorithm, and the clipping is done by parameterization of vertices from section curves. Experimental results provide octree generation time as well as Cut-cell clipping time of several models. The result shows that the proposed octree generation is fast and has linear relationship between grid generation time and the number of cut-cells.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1089-1092
• /
• 1999

Applications using 3D models are increasing recently. Since 3D polygonal models are structured by a triangular mesh, the coding of polygonal models in strips of triangles is an efficient way of representing the data. These strips may be very long, and may take a long time to render or transmit. If the triangle strips are partitioned, it may be possible to perform more efficient data transmission in an error-prone environment and to display the 3D model progressively. In this paper, we devised the Component Based Data Partitioning (CODAP) which is based on Topological Surgery (TS). In order to support the error resilience and the progressively build-up rendering, we partition the connectivity, geometry, and properties of a 3D polygonal model. Each partitioned component is independently encoded and resynchronization between partitioned components is done.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1996년도 춘계 학술대회논문집
• /
• pp.111-117
• /
• 1996

The Delaunay triangulation technique was tested for complicated shapes of computational domain. While a simple geometry, both in topology and in geometry, was discretized well into triangular elements. a complex geometry often failed in triangularization. A complex geometry should be devided into smaller sub-domains whose shape is simple both topologically and geometrically. The present study developed the data structures not only for relationships among neibering elements but also for shape information, and coupled these into the Delaunay triangulation technique. This approach was able to enhance greatly the reliability of triangularization specially in complicated shapes of computational domains. The GUI (Graphic User Interface) and OOP (Object-Oriented Programming) were used in order to develop the user-friendly and efficient computer code.

• 한국컴퓨터산업학회논문지
• /
• 제5권2호
• /
• pp.275-280
• /
• 2004

본 논문에서는 움직임 벡터(motion vector)를 추정하는 새로운 고속 알고리즘을 제안하였다. 제안된 알고리즘은 블록 합 피라미드 알고리즘의 움직임 추정 정확도를 유지하면서 연산량을 감소시키기 위하여 Efficient Multilevel Successive Elimination Algorithm의 diamond mesh기법을 개선한 후, 탐색점에서의 MAD추정기법을 적용하여 블록 합 피라미드 알고리즘에 적용한 것이다. 실험을 통하여 제안된 기법이 블록 합 피라미드 알고리즘의 연산량을 효과적으로 줄일 수 있음을 확인하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2016년도 추계학술발표대회
• /
• pp.716-718
• /
• 2016

본 논문에서는 실시간 메쉬 모델의 형태 분석 처리가 가능하도록 하기 위한 효율적 이산 곡률 근사 방법을 제안한다. 메쉬 이산 곡률을 계산하는 기존 방법들의 경우, 각 정점(vertex) 별로 인접면(face)에대한 인접 순서등 인접 정점과 인접면과의 관계에 대한 사전 분석이 요구된다. 또한, 인접 정점과의 관계 분석을 위하여 고유치 분석 등 높은 계산 비용을 요구한다. 이에 비해, 제안 방법은 각 정점별로 정렬되지 않은 인접 정점의 위치 정보만으로 이산 곡률을 계산함에 따라 계산 부담이 적은 반면, 기존에 Taubin의 방법을 적용한 결과에 비해 정확한 곡률 계산 결과를 보여 주었다. 곡률 계산의 정확성은 다양한 형태의 메쉬 모델들에 대한 기존 방법과의 비교 실험을 통하여 입증하였다.