• Convergence Security Journal
• /
• v.14 no.7
• /
• pp.37-43
• /
• 2014

Today, group research efforts are increasing for cutting edge technologies related to climate, radio astronomy, co-utilization of high performance computing resources and more. Accordingly, networks for cutting-edge researches a re also regarded as means for cutting-edge researches nowadays. Therefore, it is necessary for administrating cutti ng-edge network to be considered, reflecting such a current trend. In this sense, 'Research which can help to admin istrate the networks which are usually used as means for a lot researches' was set as a goal of this paper.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.10 no.1
• /
• pp.31-45
• /
• 2006

Recently advanced device and sophisticated manufacture process by high-density, high-integration require critical inspection criteria in SMT(surface mounting technologies). Especially for solder paste which come out over 60% of inferior goods of all product, 3-dimensional inspection replaces 2-D inspection as a effectiveness substitute of this trend. Therefore this paper proposes a fast 3-D inspection system and measurement algorithm automatically inspecting 3-D solder paste of PCB in SMT assembly line. The proposed method generates 3-D surface of data using B-spline algorithm and then extracts to inspect the pad.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.3
• /
• pp.551-559
• /
• 2016

The present trend of increasing the penetration levels of Distributed Generator (DG) in the distribution network has made the issue of Islanding crucial for the reliable operation of the network. The islanding, if not detected early may lead to the collapse of the system as it can drive the distribution system to the cascaded failure. In this paper, an extensive study of the effect of DG placement and sizing is performed by dividing the system into different zones to obtain a reduced effect of islanding. The siting and sizing of DG is carried out to improve the overall voltage profile or/and reduction in active power loss using two stage Genetic Algorithm (GA). In the first stage a basic knockout selection is considered and the best population is taken for next stage, where roulette selection for crossover and mutation is performed for optimal placement and sizing of DGs. The effect of the islanding, due to load variations is reduced by optimal siting and sizing of DG. The effectiveness of the proposed scheme is tested on the IEEE 33 and 69 radial bus systems and the results obtained are promising.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.9 s.240
• /
• pp.1243-1252
• /
• 2005

A current trend of design methodologies is to make engineers objectify or automate the decision-making process. Numerical optimization is an example of such technologies. However, in numerical optimization, the uncertainties are uncontrollable to efficiently objectify or automate the process. To better manage these uncertainties, the Taguchi method, reliability-based optimization and robust optimization are being used. To obtain the target performance with the maximum robustness is the main functional requirement of a mechanical system. In this research, a design procedure for global robust optimization is developed based on the kriging and global optimization approaches. The DACE modeling, known as the one of Kriging interpolation, is introduced to obtain the surrogate approximation model of the function. Robustness is determined by the DACE model to reduce real function calculations. The simulated annealing algorithm of global optimization methods is adopted to determine the global robust design of a surrogated model. As the postprocess, the first order second-moment approximation method is applied to refine the robust optimum. The mathematical problems and the MEMS design problem are investigated to show the validity of the proposed method.

• International Journal of Advanced Culture Technology
• /
• v.6 no.1
• /
• pp.60-67
• /
• 2018

In this paper, the pattern of extracting the same expression is proposed by using the Android intelligent device to identify the facial expression. The understanding and expression of expression are very important to human computer interaction, and the technology to identify human expressions is very popular. Instead of searching for the symbols that users often use, you can identify facial expressions with a camera, which is a useful technique that can be used now. This thesis puts forward the technology of the third data is available on the website of the set, use the content to improve the infrastructure of the facial expression recognition accuracy, to improve the synthesis of neural network algorithm, making the facial expression recognition model, the user's facial expressions and similar expressions, reached 66%. It doesn't need to search for symbols. If you use the camera to recognize the expression, it will appear symbols immediately. So, this service is the symbols used when people send messages to others, and it can feel a lot of convenience. In countless symbols, there is no need to find symbols, which is an increasing trend in deep learning. So, we need to use more suitable algorithm for expression recognition, and then improve accuracy.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.14-21
• /
• 1989

In the digital transmission equipment, the input jitter tolerance is a function of input timing recovery circuit characteristics. Especially, in the asynchronous multiplexers, it is also a function of the frame format, the buffer sizes in the synchronizer and desynchronizer, the PLL transfer function, and operating range of VCO in PLL In this paper, a new algorithm for calculating the jitter tolerance of the saynchronous digital transmission equipment is presented. With the new algorithm, we analyzed how the above factors limit the jitter tolerance in the equipment. We also measured the input jitter tolerance for a 45M-140M multiplexing equipment, whose results show the same trend with calculated tolerance.

• The KIPS Transactions:PartD
• /
• v.13D no.3 s.106
• /
• pp.377-382
• /
• 2006

Advantageous features of flash memory are stimulating its exploitation in mobile and ubiquitous related devices. The hardware characteristics of flash memory however place restrictions upon this current trend. In this paper, a cleaning policy for flash memory is proposed in order to decrease the necessary penally for recycling of memory minimizing the degradation of performance at the same time. The proposed cleaning algorithm is based on partitioning of candidate memory regions, to be reclaimed as free, into a number of groups. In addition, in order to improve the balanced utilization of the entire flash memory space in terms of 'wearing-out', a free segment selection algorithm is discussed. The impact of the proposed algorithms is evaluated through a number of experiments. Moreover, the composition of the optimal configuration featuring the proposed methods is tested through experiments.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.51-56
• /
• 2008

As RFID/USN technology is used in the latest industry trend, the information analysis paradigm shifts to intelligence service environment. The intelligent service includes autonomic operation, which select activity by defining itself to the status of industry facilities. Furthermore, information analysis based on IT used to frequently data mining for detecting the meaning information and deriving new pattern. This paper suggest self-classifying of context-aware by applying data mining in gas facilities for serving the intelligent gas safety management. We modify data algorithm for fitting the domain of gas safety, construct context-aware model by using the proposed algorithm, and demonstrate our method. As the accuracy of our model is improved over 90%, the our approach can apply to intelligent gas safety management based on RFID/USN environments.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.1
• /
• pp.174-183
• /
• 2002

In this paper a control chart pattern recognition methodology based on the back propagation algorithm and Multi layer perceptron, a neural computing theory, is presented. This pattern recognition algorithm, suitable for real time statistical process control. evaluates observations routinely collected for control charting to determine whether a Pattern, such as a cycle. trend or shift, which is exists in the data. This approach is promising because of its flexible training and high speed computation with low-end workstation. The artificial neural network methodology is developed utilizing the delta learning rule, sigmoid activation function with two hidden layers. In a computer integrated manufacturing environment, the operator need not routinely monitor the control chart but, rather, can be alerted to patterns by a computer signal generated by the proposed system.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.4
• /
• pp.105-112
• /
• 2020

In the fourth industrial revolution represented by hyper-connected and intelligence, cloud computing is drawing attention as a technology to realize big data and artificial intelligence technologies. The proliferation of cloud computing has also increased the number of threats. In this paper, we propose one way to effectively monitor to the resources assigned to clients by the IaaS service provider. The method we propose in this paper is to model the use of resources allocated to cloud systems using ARIMA algorithm, and it identifies abnormal situations through the use and trend analysis. Through experiments, we have verified that the client service provider can effectively monitor using the proposed method within the minimum amount of access to the client systems.