• 한국지형학회지
• /
• 제24권4호
• /
• pp.1-12
• /
• 2017

This study tried to reconstruct paleovegetation environments during the late Holocene with pollen analysis from archeological trenches at the right bank of Geumgang in Sejong-si. The lower hills was dominantly covered with pine trees, while alder trees and hygrophytes extended on the floodplain since 2,000yr BP. The pollen composition of Alnus dominance in the floodplain during the times is different from the general charateristics of Korean peninsula. Such a phenomenon is thought to be influenced by the fluvial process on the floodplain in the middle reaches of Geumgang around Sejong-si. Mihocheon and some tributaries join to Geumgang around Sejong-si, and the channel of Geumgang becomes narrow around the boundary between Sejong-si and Gongju-si. This narrow channel could attribute to the formation of extensive floodplain around Sejong-si. Moreover, human impacts such as agriculture appear continuously since 1,800yr BP.

• 한국지형학회지
• /
• 제23권1호
• /
• pp.61-75
• /
• 2016

This study aims to reconstruct sea level change and paleogeomorphology since the middle Holocene by diatom analysis and 14C-dating from the sedimentary facies of three trenches on alluvial plain of Taehwa River, Taehwa-dong, Ulsan-si, South Korea. The Taewha-dong area was a narrow bay located between Bangeojin and eatuary of Taehwa River was a narrow bay which has been detached from the open sea during middle Holocene. Taewa-dong area at bay area was developed into alluvial plain by the sediments had been come from the Taewa river basin. The sea level change during the middle Holocene effected on the development of Taewha-dong alluvial plain and its information is included in the sediment facies.

• Membrane and Water Treatment
• /
• 제10권1호
• /
• pp.19-28
• /
• 2019

To minimize the impact of urbanization, accurate performance evaluation of Low Impact Development (LID) facilities is needed. In Korea, the method designed to evaluate large-scale non-point pollution reduction facilities is being applied to LID facilities. However, it has been pointed out that this method is not suitable for evaluating the performance of relatively small-scale installed LID facilities. In this study, a new design formula was proposed based on the ratio of LID facility area and contributing drainage area, for estimating the Stormwater Interception Ratio (SIR) for LID facilities. The SIR was estimated for bio-retentions, infiltration trenches and vegetative swales, which are typical LID facilities, under various conditions through long-term stormwater simulation using the LID module of EPA SWMM. Based on the results of these numerical experiments, the new SIR formula for each LID facility was derived. The sensitivity of the proposed SIR formula to local rainfall properties and design variables is analysed. In addition, the SIR formula was compared with the existing design formula, the Rainfall Interception Ratio (RIR).

• Applied Microscopy
• /
• 제50권
• /
• pp.24.1-24.11
• /
• 2020

The development of the femtosecond laser (fs laser) with its ability to provide extremely rapid athermal ablation of materials has initiated a renaissance in materials science. Sample milling rates for the fs laser are orders of magnitude greater than that of traditional focused ion beam (FIB) sources currently used. In combination with minimal surface post-processing requirements, this technology is proving to be a game changer for materials research. The development of a femtosecond laser attached to a focused ion beam scanning electron microscope (LaserFIB) enables numerous new capabilities, including access to deeply buried structures as well as the production of extremely large trenches, cross sections, pillars and TEM H-bars, all while preserving microstructure and avoiding or reducing FIB polishing. Several high impact applications are now possible due to this technology in the fields of crystallography, electronics, mechanical engineering, battery research and materials sample preparation. This review article summarizes the current opportunities for this new technology focusing on the materials science megatrends of engineering materials, energy materials and electronics.

• Current Optics and Photonics
• /
• 제7권2호
• /
• pp.157-165
• /
• 2023

We propose a highly directional waveguide grating antenna for an optical phased array, achieving high directionality of more than 97% by interleaving the trenches with different etching depths in the silicon nitride layer, and adopting a multilayered structure. Meanwhile, the multilayered structure reduces the perturbation strength, which enables a centimeter-scale radiation length. The beam-steering range is 13.2°, with a wavelength bandwidth of 100 nm. The 1-dB bandwidth of the grating is 305 nm. The multilayered grating structure has a large tolerance to the fabrication variation and is compatible with CMOS fabrication techniques.

• 로봇학회논문지
• /
• 제18권2호
• /
• pp.143-154
• /
• 2023

In this study, a fast motion planning method for the swing motion of a 6x6 wheel-legged robot to traverse large obstacles and gaps is proposed. The motion planning method presented in the previous paper, which was based on trajectory optimization, took up to tens of seconds and was limited to two-dimensional, structured vertical obstacles and trenches. A deep neural network based on one-dimensional Convolutional Neural Network (CNN) is introduced to generate keyframes, which are then used to represent smooth reference commands for the six leg angles along the robot's path. The network is initially trained using the behavioral cloning method with a dataset gathered from previous simulation results of the trajectory optimization. Its performance is then improved through reinforcement learning, using a one-step REINFORCE algorithm. The trained model has increased the speed of motion planning by up to 820 times and improved the success rates of obstacle crossing under harsh conditions, such as low friction and high roughness.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권1호
• /
• pp.84-93
• /
• 2001

An electromagnetic micro x-y stage for probe-based data storage (PDS) has been fabricated. The x-y stage consists of a silicon body inside which planar copper coils are embedded, a glass substrate bonded to the silicon body, and eight permanent magnets. The dimensions of flexures and copper coils were determined to yield $100{\;}\mu\textrm{m}$ in x and y directions under 50 mA of supplied current and to have 440 Hz of natural frequency. For the application to PDS devices, electromagnetic stage should have flat top surface for the prevention of its interference with multi-probe array, and have coils with low resistance for low power consumption. In order to satisfy these design criteria, conducting planar copper coils have been electroplated within silicon trenches which have high aspect ratio ($5{\;}\mu\textrm{m}$in width and $30{\;}\mu\textrm{m}$in depth). Silicon flexures with a height of $250{\;}\mu\textrm{m}$ were fabricated by using inductively coupled plasma reactive ion etching (ICP-RIE). The characteristics of a fabricated electromagnetic stage were measured by using laser doppler vibrometer (LDV) and dynamic signal analyzer (DSA). The DC gain was $0.16{\;}\mu\textrm{m}/mA$ and the maximum displacement was $42{\;}\mu\textrm{m}$ at a current of 180 mA. The measured natural frequency of the lowest mode was 325 Hz. Compared with the designed values, the lower natural frequency and DC gain of the fabricated device are due to the reverse-tapered ICP-RIE process and the incomplete assembly of the upper-sided permanent magnets for LDV measurements.

• 한국물환경학회지
• /
• 제34권1호
• /
• pp.57-66
• /
• 2018

Water disasters such as flash floods and inundation caused by localized heavy rainfall in urban areas have a large impact on climate change but are also closely related to the increase in impervious areas as pointed out in domestic and international studies. It is difficult to secure natural green areas in urban areas that have already been developed. So, urban regeneration can be expected using water management optimized with technologies to secure infiltration and storage capacity such as Low-Impact Development technology. In this study, the water cycle improvement ability was confirmed by applying the LID technology within the district unit plan of the environmentally friendly village, and the economic feasibility of LID application was analyzed by estimating the costs and benefits of installing the facilities. The site was planned to conserve sufficient green and plans for securing the watershed infiltration and storage capacity were formulated with the application of additional LID technology, such as infiltration trenches, rain barrels and permeable pavements. The LID design method applicable to the site was established, and the water balance of the watershed was analyzed through simulations of the SWMM model. The water circulation improvement effect was confirmed through the water balance analysis, and the cost-benefits were determined according to the estimation method, and the economic analysis was conducted. This study confirms that the investment of LID technology is economically feasible for the hydrological improvement effect of the housing complex.

• KIEAE Journal
• /
• 제16권6호
• /
• pp.103-108
• /
• 2016

Purpose: This study has developed economical and environmentally friendly storage type infiltration facilities that securing storage space inside the infiltration facility. It focused on preventing flooding rainfall as well as securing more groundwater through rainwater infiltration that is valuable for the dry season. In addition, this study compares the installation cost of the storage-type infiltration facility to the cost of the conventional rainwater management facilities to demonstrate the economic efficiency of the storage-based infiltration facility. Method: Unit infiltration of this facility is calculated and when it was applied to a certain capacity, the amount of countermeasures are proposed in case study. Result: Unit infiltration of it is $0.2541m^3/hr$ and un it Temporary storage of it is $1.054m^3/m$. As a result, the infiltration effect of this facility is $1.306m^3/hr$. The cost was approximately 30% reduction in time to apply the storage type infiltration facility as compared with the case to apply the existing penetration of the facilities. Since the penetration of the existing facilities is smaller than that and it has much securing volume to process the same the amount of countermeasures. Therefore, it is determined that the cost significantly increases in material cost part. On the other hand, storage type infiltration facility is installed a small quantity because Unit Temporary storage and infiltration are bigger than that. So, it occurred to reduce material and installation costs.

• 한국수자원학회논문집
• /
• 제31권2호
• /
• pp.167-176
• /
• 1998

급사면에 관측정, 텐시오메타, 트렌치 등의 시설을 설치하고 포화대의 형성 과정과 중간류의 유출특성을 관측하여 분석하였다. 사면의 토양이 건조한 때에 내린 강우(총강우량 103mm)에 의해 포화대는 사면 상부 관측정부터 형성되기 시작하여 강우 종료 수 시간 후에 사면 전체에 발달하였다. 이 포화대는 포화대 형성에 필요한 것보다 적은 양의 강우에 의해 형성되었고, 포화대내의 일부 깊이의 토양 수분이 불포화 상태이었기 때문에 포화대는 침투수가 일부 토양만을 포화시켜 형성된 것으로 판단된다. 이 포화대로부터 중간류는 포화대 형성 초기에 0∼40cm 깊이의 토양층을 통해 유출될 뿐 40∼80cm 깊이의 토양층을 통한 유출은 거의 없었다. 사면에 형성된 기존의 포화대의 수위는 강우에 빠르게 반응하며 중간류는 수위상승과 동시에 대부분 40∼80cm 깊이의 토양층을 통해 유출되기 시작하였다. 포화대의 최대 수위가 유사한 4개 강우의 40∼80cm 깊이의 토양층을 통한 중간류 유출률은 선행 강우량과 관계가 있었다.