• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.841-844
• /
• 2002

The vertical impact crusher is the machine which could produce artifical sand similar to natural aggregates in the site of guarry and pits. FEM was used to analyse the stress and strength of the machine at high rotational speed. The test specimen was made from the same material as the shaft and tension tests were conducted. The shaft under extreme conditions was analysed to determine maximum stress level and its location from the results. The maximum level of stress and its location could be predicted.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.211-220
• /
• 2004

The vertical impact crusher is the machine which could produce artifical sand similar to natural aggregates in the site of guarry and pits. FEM was used to analyse the stress and strength of the machine at high rotational speed. The test specimen was made from the same material as the shaft and tension tests were conducted. The Shaft under extreme conditions was analysed to determine maximum stress level and its location from the results. The maximum level of stress and its location could be predicted.

• Journal of the Korean Society of Safety
• /
• v.11 no.4
• /
• pp.90-96
• /
• 1996

This paper examines the De-inking characteristics of mechanical methods using the newly developed De-inking machine along with experiments to enhance the manufacture of recycled kraft pulp with the addition of newspaper. This study concluded that : First, the De-Inking ratio was affected by shear stress and friction resistance operating In the stainless steel net. Second, the brightness improvement ratio was raised by 6.2% under the following conditions : 120rpm rotor speed, 2.18% concentration, using two treatment cycles. Third, it was shown that the tearing strength was improved by about 10 to 20% , and the tensile strength remained the same when recycled kraft pulp was added with 20% wasted paper. In sum, by these experiments we have proven that the performance of the newly developed De-inking machine can be improved.

• International journal of advanced smart convergence
• /
• v.12 no.2
• /
• pp.17-24
• /
• 2023

Given the surge in the elderly population, and increasing in dementia cases, there is a growing interest in digital therapies that facilitate steady remote treatment. However, in the cognitive assessment of digital therapies through clinical trials, the absence of log data as an essential evaluation factor is a significant issue. To address this, we propose a solution of utilizing weighted derived variables based on high-importance variables' accuracy in log data utilization as an indirect cognitive assessment factor for digital therapies. We have validated the effectiveness of this approach using machine learning techniques such as XGBoost, LGBM, and CatBoost. Thus, we suggest the use of log data as a rapid and indirect cognitive evaluation factor for digital therapy users.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1203-1204
• /
• 2006

Cu-$TiB_2$ nanocomposite powders were synthesized by combining high-energy ball-milling of Cu-Ti-B mixtures and subsequent self-propagating high temperature synthesis (SHS). Cu-40wt.%$TiB_2$ powders were produced by SHS reaction and ball-milled. The milled SHS powder was mixed with Cu powders by ball milling to produce Cu-2.5wt.%$TiB_2$ composites. $TiB_2$ particles less than 250nm were formed in the copper matrix after SHS-reaction. The releative density, electrical conductivity and hardness of specimens sintered at $650-750^{\circ}C$ were nearly 98%, 83%IACS and 71HRB, respectively. After heat treatment at 850 to $950^{\circ}C$ for 2 hours under Ar atmosphere, hardness was descedned by 15%. Our Cu-$TiB_2$ composite showed good thermal stability at eleveated temperature.

• Journal of Bio-Environment Control
• /
• v.33 no.1
• /
• pp.30-36
• /
• 2024

This study was conducted to determine the optimal working conditions when a recently developed blower-type onion stem cutter is utilized for cutting onion leaves at harvest time. The June 20 leaf cutting treatment group had the highest leaf dryness among the treatment groups (leaf dryness: 66.3%; leaf moisture content: 50.5%); the residual leaf length was 6.7 ± 3.5 cm. It is considered to have the best mechanical leaf cutting performance among the treatment groups because it is included in the optimal range of 4-10 cm. The average working speed of mechanical onion leaf cutting using the stem cutter was 0.17 m·s^-1, which is approximately 3.4 times faster than the average working speed of 0.05 m·s^-1 in the human leaf cutting treatment group. This is expected to save approximately 2.6 hours compared to human labor (based on one person) when working on a 10a area using this machine. In addition, the incidence of damaged bulbs in the machine leaf cutting treatment group was 1.3%, compared to 0.0% in the manual leaf cutting treatment group. This suggests that the mechanical leaf cutting treatment group had a higher average onion bulb decay rate during storage than the manual leaf cutting treatment group. When the storage characteristics of each treatment group were examined, the decay rate by bulb part (leaf connected or root connected) after 8 months of storage was higher in the treatment group with a residual leaf length of less than 5.0 cm after mechanical leaf cutting than in the treatment with a residual leaf length of more than 5.0 cm. This is thought to be due to the fact that treatments with a residual leaf length of less than 5.0 cm are more susceptible to infection by pathogens that cause decay during storage than treatments with a residual leaf length of 5.0 cm or more. Based on the results of this experiment, performance target of the experimental machine (residual leaf length after operation: 5 cm), and existing research on the optimal residual leaf length for onion harvesting, it is recommended to cut onion leaves so that the residual leaf length is 5-10 cm when using the stem cutter.

• The Journal of Internal Korean Medicine
• /
• v.20 no.1
• /
• pp.244-260
• /
• 1999

This study was to investigate diagnosis of shoulder pain on cerebrovascular attack patients and treatment effects by using physical treatment and orienatal diagnosis aparatus, as oriental diagnosis equipments, these were used thermography, maegzin and yangdorag machine. as physical treatment equipments, these were used Hot pack, TENS (Transcutaneous electrical nerve stimulation), ICT(Interferential current therapy) the results were followed 1. In Sex and Age distribution on cerebrovascular attack patients with shoulder pain, male(51.7%)had many than female(48.3%) and 60s were the top, next 70s 50s 40s. 2. In the reason of cerebrovascular attack and the type of motor paresis, cerebrovascular infarction(73.3%) had many than hemorrhage(26.7%) 3. In hospitalizied period of cerebrovascular attack patients with shoulder pain, the period from 11 to 60 days had almost occupied. 4. Oriental medical diagnositic propriety of shoulder pain by using maegzin and yangdorag machine were not recognized. 5. In measuring passive range of motion of pre and post treatment, improvement effect on Hot pack was not showed, but effects on TENS, ICT were showed. 6. In measuring temperature of painful shouler joint of pre and post treatment by using thermography, the effect of Hot pack was not recognized but the effects of TENS, ICT were recognized.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.4
• /
• pp.232-236
• /
• 2000

To obtain a basic information on the development of effective control strategies for weedy rice in direct seeding rice cultivation, occurrence patterns of weedy rice as influenced by different cultural practices such as cultivation method, water management, seeding time, and tillage were investigated in field or pot experiments. High occurrence of weedy rice was observed in a continuous direct seeding paddy field as compared to machine transplanted one. Based on the percent of weedy rice panicle over three years trial, high ridged dry seeding was highest with 36.9%, followed by wet seeding with 30.9%, water seeding with 14.6% and machine transplanting rice with 0.8%, indicating 97.8% reduction in weedy rice occurrence by machine transplanting rice as compared with high ridged dry seeding. Germination of weedy rice was promoted to 83-94 % when rice panicle was flooded from September 30 to October 10 for 6 days and 74-88% for 9 days on October 20. Weedy rice occurrence was also substantially reduced by delayed seeding on June 10 and intensive tillage. The results suggest that machine transplanting rice be more effective cultural practice than flooding treatment, delayed seeding and intensive tillage when weedy rice problem occurs in direct seeded paddy field.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.2
• /
• pp.119-129
• /
• 2006

Art psychotherapy is widely accepted as an effective tool for diagnosis and treatment of psychological disorders. Important factors for art psychotherapy diagnosis, based on the projection theory that the world of the inner mind appears in drawings, include main color and imbalance of a drawing. This paper develops a system for a machine to determine the main color and the imbalance of a drawing by color recognition and edge detection. Our proposed color recognition procedure adopts NBS(National Bureau of Standards) distance between colors in HVC(Hue, Value, Chroma) color space which is most similar to the human eye's color perception. Our edge detection procedure applies blurring, clustering and transformation to a standard color in a series. Our system considers the numbers of pixels and clusters for each color as a criterion for main color and the frequency of edge coordinates for each region for imbalance. The proposed machine procedure, verified through case studies, can help overcome the subjectivity, ambiguity and uncertainty in human decision involved in art psychotherapy.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.1
• /
• pp.88-99
• /
• 2004

The purpose of this study is to observe the significance and symbolic meaning of fashion design which is combined with machines, and to develop excellent designs in aesthetic aspects. The method of this study analyzed the related documents and journal, fashion magazines. The results is as follows. The cyborg discourse and virtual human body in virtual world predict the existence of new human. In present times, up-to-date equipments such as wearable computer have begun to be built-in clothing based on technology, and these dress and ornaments influence on human's life gradually in practicality and ability. These equipments are divided as military affairs, medical treatment equipment, leisure, information access and communication, guard, and business assistance. And according to the kind of item, they are divided by headwear, clothing and accessory. The significance of clothing combined with machine is practical viewpoint, economical viewpoint and aesthetic viewpoint. And the symbolic meaning of these fashion combined machine with technology is dis-identity in digital society, dis-borderness between human and machine and the uncertainty of human being. Like this, the clothing which is combined with high-technology shapes its own unique and individual system. But, this must escape from the limit of medium system itself that is technology to become a future clothing for human, suggest new agenda about human and society, and confirm the human being's existence and identity continually.