• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.142-150
• /
• 2011

Defect dispute has been increasing to claim by condominium, in increasing to demand and concern in value, quality, and management of apartment building since 2000s. In this study, for checking property of cost in crack issue with precedure of lawsuit on defect, it is analyzing details about repairing cost of concrete crack defect that formed 77 percent of repairing cost. Futhermore, it is studying of composition of repairing cost and difference of repairing cost by repairing method. This is checking details that cost growth has a difference whether court accept a acceptable range of crack width, and repairing method and reinforcement work has to choose between a surface treatment method, a filling method and a injecting method. Meanwhile, it is considerable that disparity of repairing cost whether is a method of painting work.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.5
• /
• pp.1761-1766
• /
• 2012

Background: The appropriate interval between negative colonoscopy screenings is uncertain, but the numbers of advanced neoplasms 10 years after a negative result are generally low. We aimed to evaluate the cost-effectiveness of colorectal neoplasm screening and management based on repeat screening colonoscopy every 10 years or single colonoscopy, compared with no screening in the general population. Methods and materials: A state-transition Markov model simulated 100,000 individuals aged 50-80 years accepting repeat screening colonoscopy every 10 years or single colonoscopy, offered to every subject. Colorectal adenomas found during colonoscopy were removed by polypectomy, and the subjects were followed with surveillance every three years. For subjects with a normal result, colonoscopy was resumed within ten years in the repeat screening strategy. In single screening strategy, screening process was terminated. Direct costs such as screening tests, cancer treatment and costs of complications were included. Indirect costs were excluded from the model. The incremental cost-effectiveness ratio was used to evaluate the cost-effectiveness of the different screening strategies. Results: Assuming a first-time compliance rate of 90%, repeat screening colonoscopy and single colonoscopy can reduce the incidence of colorectal cancer by 65.8% and 67.2% respectively. The incremental cost-effectiveness ratio for single colonoscopy (49 Renminbi Yuan [RMB]) was much lower than that for repeat screening colonoscopy (474 RMB). Single colonoscopy was a more cost-effective strategy, which was not sensitive to the compliance rate of colonoscopy and the cost of advanced colorectal cancer. Conclusion: Single colonoscopy is suggested to be the more cost-effective strategy for screening and management of colorectal neoplasms and may be recommended in China clinical practice.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.3
• /
• pp.139-144
• /
• 2016

When, Software is developed, Applying development methods considering security, it is generated the problem of additional cost. These additional costs are caused not consider security in many developing organization. Even though, proceeding the developments, considering security, lack of ways to get the cost of handling the vulnerability throughput within the given cost. In this paper, propose a method for calculating the vulnerability throughput for using a security vulnerability processed cost-effectively. In the proposed method focuses on the implementation phase of the software development phase, leveraging static analysis tools to find security vulnerabilities in CWE TOP25. The found vulnerabilities are define risk, transaction costs, risk costs and defines the processing priority. utilizing the information in the CWE, Calculating a consumed cost in a detected vulnerability processed through a defined priority, and controls the vulnerability throughput in the input cost. When applying the method, it is expected to handle the maximum risk of vulnerability in the input cost.

• Korean Journal of Organic Agriculture
• /
• v.28 no.4
• /
• pp.535-553
• /
• 2020

In this study, the characteristics of the waste sector CDM project were analyzed through cluster analysis of the waste sector CDM project and the analysis of the CDM investment cost in waste sector using CDM project data registered with UNFCCC since 2008 when EU ETS phase 2 began. As of September 2020, 772 cases of CDM projects in waste disposal and disposal are registered. Biogas technology is the largest, followed by livestock manure processing and biomass production technology. The results of the cluster analysis are summarized as follows: First, on average, projects utilizing AWMS technology are small in size and relatively low in investment costs. This is judged to be relatively low investment costs due to previously attracted foreign investment capital. Second, the average investment cost of CDM projects considered along with waste (No.13), the energy industry (No.1) and agriculture (No.15) was higher than those involving only waste. The analysis of the factors determining the investment cost of the waste sector CDM project showed that, as with cluster analysis, the AWMS technology, which is a livestock manure treatment technology, was lower in the investment cost than those that use other technologies. As a result of multiple regression analysis, the investment cost of the CDM project was analyzed lower in the order of biomass, AWMS, LFG and biogas. Also, the higher the investment cost for CDM projects linked to waste, energy and agriculture, and the better the investment environment, the higher the investment cost. Although no statistical feasibility was obtained, the larger the annual emission reduction, the lower the CDM investment cost.

• Health Policy and Management
• /
• v.14 no.1
• /
• pp.89-120
• /
• 2004

The purpose of this empirical study is to test hypotheses in order to identify the cost drivers that drive indirect costs in general hospitals in Korea. In various cases' studies, it has been suggested that overhead costs are driven by volume and complexity variables, how they are structurally related and how the cost impacts of these variables can be A unique feature of the research is the treatment of complexity as an endogenous variable. It is hypothesized that level of hospital complexity in terms of the number of services provided(i.e., “breath" complexity) and the intensity of individual estimated in practice. overhead services(ie., “depth" complexity) are simultaneous determined with the level of costs needed to support the complexity. Data used in this study were obtained from the Database of Korean Health Industry Development Institute, Health Insurance Review Agency and analyzed using simultaneous equation model, path model. The results found those volume and complexity variables are all statistically signi-ficance drivers of general hospital overhead costs. This study has documented that the level of service complexity is a significant determinant of hospital overhead costs, caution should be exercised in interpreting this as supportive of the cost accounting procedures associated with ABC. with ABC.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.2
• /
• pp.9-20
• /
• 2013

Many studies have reported additional treatment is needed to use wastewater for agricultural purpose. Economic considerations should be taken into account to establish infrastructure for agricultural reuse because of a large amount of water use in irrigation and relatively low water quality requirement. The objective of this study was to conduct economic analysis of wastewater reclamation and reuse systems for agriculture. A system dynamics approach considering complexity and dynamics in the wastewater reuse systems was used for the economic analysis, which are related with social, environmental, and economic problems. Sensitivity and benefit cost analysis for wastewater reuse systems was conducted through the established economic assessment model. The result of sensitivity analysis showed that water resources development and installation cost were the most sensitive for total benefits and costs, respectively. The scenario-based test of the organized economic assessment model shows marginal cost ranges and enables decision-makers to decide reasonable cost for the wastewater reuse systems for agriculture.

• Korean Journal of Clinical Pharmacy
• /
• v.20 no.3
• /
• pp.268-277
• /
• 2010

This study was conducted to analyze the cost-utility of ramosetron monotherapy, trimebutine monotherapy and trimebutine+loperamide combination therapy in male diarrhea-predominant patients with irritable bowel syndrome (IBS) in Korean healthcare setting. We constructed a decision-analytical model to estimate both total costs for each state of health and outcomes such as IBS-symptoms improvement for 3 and 6 months time horizon. Base analysis found that for ramosetron treatment with the price of KW910 for 5 ${\mu}g$ tablet, incremental cost effectiveness ratios (ICERs, cost per quality-adjusted life day) were KW85,000 and KW62,000 for 3 months and 6 months, respectively, compared with trimebutine. But ramosetron was a dominant strategy when compared with trimebutine+loperamide for both 3 months and 6 months. Sensitivity analyses showed robust results for drug acquisition costs till ramosetron price of KW950/tablet. In conclusion, ramosetron was a cost-effective regimen compared with trimebutine or trimebutine+loperamide from the societal perspective.

• Journal of Distribution Science
• /
• v.17 no.4
• /
• pp.51-57
• /
• 2019

Purpose - This study aims to improve the distribution structure of the OLED market and develop cost-effective optimization techniques. Specifically, it is a study on the optimization of ferric chloride to improve the etch of SUS MASK for OLED. Research design, data, and methodology - Applying the optimal conditions of the experiment, the final confirmation was evaluated for improvement by the Process Capability Index (Cpk). It is possible to derive social performance such as improvement of precision of SUS MASK manufacturing, economic performance such as defect rate, reduction of waste generation and treatment cost, technological achievement such as SUS MASK production technology, improvement of profit structure of technology development and process improvement do. Results - The improvement of the Cpk before the improvement was made was confirmed to be 0.57% with a defect estimate of 25.07% with a failure estimate of 0.57% after the improvement, and 8.84% with a failure estimate of 0.57% level after the improvement. Conclusions - If the conclusions obtained from the specimen experiment are applied to the manufacturing process of SUS MASK, it will be possible to expect excellent cost-effective competitiveness due to the improvement of precision and reduction of defect rate to enhance the OLED market penetration.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.4
• /
• pp.169-185
• /
• 2003

Recently many researchers contributed to the understanding of Quality Control System, but the use of economics in the design of quality assurance system is limited in treatment of the relationship between the average incoming quality level (or average process quality level) of the incoming lot and the average outgoing quality level of this lot. In this study, a traditional concept of sampling inspection plan for the quality assurance system is extended to a consideration of economic aspects in total production system by representing and analyzing the effects between proceeding and succeeding production process including inspection process. This approach recognizes that the decision at each manufacturing process (or assembly process), is to be determined not only by the cost and the average outgoing quality level of that process, but also by the input parameters of the cost and the incoming quality to the succeeding process. By analyzing the effects of the average incoming and outgoing quality, manufacturing or assembly process quality level and sampling inspection plan on the production system, mathematical models and solution technique to minimize the total production cost for a general product manufacturing system with specified average outgoing quality limit are suggested.

• Journal of Pharmacopuncture
• /
• v.15 no.3
• /
• pp.7-12
• /
• 2012

Objective: This study aimed to summarize and analyze the usage of and the satisfaction levels with combined treatment including Oriental and Western medicine. Methods: We searched studies on the usage of and the satisfaction levels with combined treatment including Oriental and Western medicine over the past 10 yrs (2001-2011) from 3 Korean databases (National Assembly Library, Research Information Service System, and National Discovery for Science Leaders). The reviewers also conducted a summarizing analysis by sampling the literature according to the type of study, study period, region, study subjects, sample size, type of sampling, research method, data analysis, study instruments, main results, etc. Results: When the main results of six studies on combined treatment usage and satisfaction levels were considered together, the most important decisive factor in determining the usage of combined treatment was the illness of the patient, followed by the patient's occupation, sex, age, education, marital status, religion, treatment cost, and treatment results. In addition, the most important factor that determined satisfaction levels with combined treatment was age, followed by education, religion, income, health status, treatment procedures, staff attitude, and cleanliness. Conclusions: Elderly patients with musculoskeletal, cerebro-vascular, and circulatory system illnesses are more likely to prefer combined treatment over independent Oriental or Western treatment and are more likely to request specialized, adjusted medical care.