• Journal of the Korean Society of Tobacco Science
• /
• v.11 no.1
• /
• pp.79-85
• /
• 1989

For the Purpose of this study, were researched the optimum condition preconditioning condition of orient tobacco leaves . The loss of 3-methyl pentanoic acid (3-MP) component of BASMA leaves in the treatment process amount to about 60% , but the loss of 3-MP At the optimum conditions of BASMA CTC treatment, the temperature was 45-$65^{\circ}C$ and the treatment time 25-35 minutes. And further, the physical properties of BASMA after CTC treatment was remarkably similar to the control's. Since VTC minimized the loss, it is suggested that CTC method should be changed by VTC method.

• The Korean Society of Law and Medicine
• /
• v.10 no.1
• /
• pp.263-305
• /
• 2009

Is it lawful to withhold or withdraw life-sustaining treatment applied to a patient in a terminal condition or permanent unconscious condition? In Korea, there are no such laws or regulations which control affairs related to the withholding or withdrawal life-support treatment and active euthanasia as the Natural Death Act or the Death with Dignity Act in the U. S. A. And in addition there has had no precedent of Supreme Court. Recently Supreme Court has pronounced a historical judgment on a terminal care case. The court allowed the withdrawal of life-sustaining treatment from a patient in a permanent unconscious state. Fundamentally the court judged that the continuation of that medical treatment would infringe dignity and value of a patient as a human being. And the court required some legal grounds to consider such withdrawal or withholding of medical care lawful. The legal grounds are as follow. First, the patient is in a incurable and irreversible condition and already entered a stage of death. Second, the patient executed a directive, in advance, directing the withholding or withdrawal of life-support treatment in a incurable and irreversible condition or in a terminal condition. Otherwise, at least, the patient's will would be presumed through his/her character, view of value, philosophy, religious faith and career etc. I regard if a patient is in a incurable and irreversible condition or in a terminal condition, the medical contract between a patient and a doctor would be terminated because of the actual impossibility of achievement of it's purpose. So I think the discontinuation of life-sustaining care would be legally allowed without depending on the patient's own will.

• Membrane Journal
• /
• v.9 no.4
• /
• pp.193-201
• /
• 1999

The object of study were the development of membrane process and the optimization of operation condition for membrane system, which was used the pre-treatment system of tap water treatment in steady of conventional process such as coagulation, sedimentation. The higher steady flux is very important factor, by a suitable pre-treatment and optimization of operating condition such as fouling control, crossflow and backwashing method, in membrane system. So, we were observed the effect of flux decline for membrane used by 4 type ultrafiltration(UF) membrane pre-treatment process, and optimized the operation condition of filtration system under various MWCO(Molecular weight cut-off), operation pressure, linear velocity and temperature to maintain higher flux. From these experiment, we were identified that UF process showed a slower flux decline rate and a higher flux recovery than microfiltration(MF) membrane. The water quality of UF permeate was better than that of MF, and was not effected pre-treatment process. In the operation condition, the rate of flux decline was diminished by a higher linear velocity and operation temperature, lower pressure.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.61-72
• /
• 2014

The aim of this study is to define the condition of optimal pre-treatment for preferable activated carbon fibers (ACFs), which are based on rayon fibers. This paper shows the ideal path of ACFs preparation process; implies that rayon fibers are pre-treated by various solvents with different times before the heating process. The pre-treated rayon fibers finally turned into desirable rayon fiber-based ACFs through optimal pre-treatment condition by heating processes. The thermal analysis method of pre-treated rayon fibers by thermo-gravimetry analyser (TGA) is an idealized tool, which analyzes the best thermal condition of pre-treatment process. Surface morphologies of resulting rayon fibers based ACFs were examined by scanning electron microscope(SEM). The results of TGA and SEM analyses show that the optimal pre-treatment condition for preparing ACFs was clearly defined, in terms of thermal stability and surface morphology.

• Journal of Plant Biology
• /
• v.38 no.1
• /
• pp.11-18
• /
• 1995

Mercury-induced changes in Chl a fluorescence induction kinetics of scratched barley leaf segments were dependent on the presence of light. By the treatment of 50$\mu$M HgCl2 under light condition, Fm and Fp were decreased. However, they were not significantly reduced under dark condition even after 2 h of mercury treatment. Under dark condition the decrease in variable fluorescence (Fv) after P transient was blocked within 20 min of the treatment. The analysis of fast fluorescence rise curve suggests that the inhibitory site of mercury under both light and dark conditions is not at QB binding site and the inhibition does not involve the increase in inactive PSII centers. Under light condition the decrease in Fp was partially recovered by addition of 50 $\mu$M NH2OH. These results suggest that a major inhibitory site of mercury under dark condition is at the reducing side of PSII and the site under light condition is at the oxidizing side of PSII possibly in addition to the one under dark condition. Under both light and dark conditions, energy-dependent quenching(qE) was alomost completely repressed within 20 min of mercury treatment and noticible change in Fo was not observed. The qE repression is probably due to the blockage of transthylakoid ΔpH formation.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.85-90
• /
• 2005

The effect of sodium acetate to reduce the fiber damage and hardening of acetate fabrics during alkaline treatment is studied. The optimal condition is controlled concentration 2%, at $50^{\circ}C$ for 6 minutes and at $70^{\circ}C$ for 2 minutes through the result of weight loss, shrinkage and tensile strength. Alkaline treated acetate fabrics under optimal condition show softer than untreated acetate fabrics. Alkaline treatment with sodium acetate brings the reduction in hardening and shrinkage in internal fiber of acetate fabric. Also, alkaline treatment with sodium acetate improves the tensile strength of acetate fabrics compared with only alkaline treatment. The moisture regain of acetate fabrics is also improved by alkaline treatment under optimal condition.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.235-238
• /
• 2009

The study of our investigating and analyzing through experiments the performance on nonslip techniques, which has been nationally applied and represented, showed the following results. 1) In wearing shoes condition, regardless the shape of the surface and surface condition of the object, it satisfied the performance standard in cleaned and dried condition and the pulverulent body mixed liquid dispersed moisture condition. However, for the case of the non-slip agent treatment, not likely as the non-slip tape treatment case, the effect was not approved as it shows almost the same CSR as none treatment. 2) In bare foot condition, it satisfied the performance standard in most of the objects except for the Ceramic tile (A), Ceramic tile (B), pure and soapy water dispersed condition.

• Journal of the Korean Society for Heat Treatment
• /
• v.30 no.2
• /
• pp.43-52
• /
• 2017

Heat treatment condition for dissolution of the M23C6 carbides in 2.25Cr-1Mo-V-Ti material for thermal power plant tube was investigated using a dilatometer method. 2.25Cr-1Mo-V-Ti material was heat-treated at $900{\sim}1,100^{\circ}C$ for 0, 10, 30 min to find the proper dissolution condition of M23C6 carbides. The phase identification and volume fraction of the carbide were measured by using OM, SEM, EBSD and TEM analysis. Optimal heat treatment condition of M23C6 carbide dissolution was selected by predicting dissolution temperature of carbide using Bs points appeared at dilatometer curve. Experimental results showed that the conditions of carbide dissolution was 900, 1,000, $1,100^{\circ}C$ for 30 min. Eventually, the optimal heat treatment condition for dissolution was 30 min at $1,000^{\circ}C$ considering the minimum coarsening of Austenite grain size.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.3
• /
• pp.184-189
• /
• 1994

The heat treatment charaterristic of SCM 440 and B 16 steels has been investigated in various condition(A, B and C) to the effect of heat treatment on mechanical properties, and the following results were obtained. 1. We are obtained a good nitriding characteristic in bainitic structure than other heat treatment cycle in our experiment. 2. Fatigue characteristic has shown in order of B)C)A condition as heat treatment cycle. 3. The effective hardening depth and fatigue characteristic has been excellented in B 16 than SCM 440 after the nitriding and Q. T for Band C condition. 4. Nitriding depth has been increased in addition of Cr, V and the nitriding efficiency is increased as easiness of banite formation to wide range of cooling rate by addition of Mo. 5. The depth of compound layer in parallel surface, notched slop plane and notched bottom has been varied to the nitriding depth of 5, 4 and 3 ${\mu}$ in relatively uniform pattern after 10h nitriding treatment for SCM 440 into A condition.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.238-243
• /
• 2011

This study compared Kd, loss factor and thickness of floor impact isolator by loading/unloading heat treatment with results by continuous loading treatment and checked problem and improvement method of heat treatment condition for the long-term stability evaluation of the floor impact isolation. As the results, it is required the change of heat treatment condition unloading now to loading as actual weigh on the floor impact isolator.