• 대한치과기공학회지
• /
• 제42권2호
• /
• pp.149-162
• /
• 2020

Purpose: The purpose of this study was to conduct a cost accounting of implant prosthesis according to the fabrication activities. Methods: In this study, the cost price of implant prosthesis fabrication activities was calculated by the bottom-up costing approach for material and labor cost and the top-down costing approach for expenses and other. Results: The total cost price was estimated to 220,000 ~ 310,000 won per one implant prosthesis. By product, the screw type was estimated to 220,000 ~ 230,000 won, and when the stent and tray were included, it was 260,000 ~ 270,000 won, which increased about 40,000 won. And, the cement type with more material and labor time was estimated to 250,000 ~ 260,000 won, and when the stent and tray were included, it was about 300,000 won. Conclusion: In terms of the fabrication cost ratio by items, it was shown that material cost and labor cost accounted for about 40% and 30% of the total cost structure for resin case, respectively, which was the opposite for porcelain. It was shown that expenses and general administrative expenses accounted for about 15%, and profits were about 11% ~ 14% in both cases.

• 생물환경조절학회지
• /
• 제12권2호
• /
• pp.101-105
• /
• 2003

양파 plug묘 육묘시 일장조절에 의한 우량묘 생산을 위해 자연일장을 대비로 하여 11.5시간, 12.5시간 및 13.5시간의 일장 하에서 월륜과 창녕대고 품종을 200공 plug tray에 육묘한 후에 직경 16cm pot에 이식하여 16시간의 일장 하에서 재배하였다. 엽수, 엽초경, 초장 및 엽초장은 시기가 경과할수록 증가하였으나 13.5시간 일장에서의 초장과 엽초경은 일장처리 20일 후에는 감소하였다. 일장에 따른 생육은 엽수 및 엽초경은 장일조건에서 생육이 좋았으나 초장 및 엽초장은 장일에서 억제되는 경향을 나타내었다. 장일조건에서 육묘한 것일수록 이식 후에 구가 크고 비대도 빨랐다. 이상의 결과로 볼 때 육묘기간 중의 장일처리로서 도장의 억제 및 우량묘 생산의 가능성을 보여주고 있다.

• Journal of Biosystems Engineering
• /
• 제25권6호
• /
• pp.463-470
• /
• 2000

For maximum seeding efficiency of a nozzle type seeder, the performance of the nozzle should be considered sufficiently. This study was carried out to investigate the optimum operating conditions of a seeder attached the vacuum nozzle which was modified syringe needle acting on the plug seedling tray and the seed plate. Such operating factors as the hole diameter of the nozzle (d), the distance from the nozzle tip to the bottom plate of seed hopper(D) the absorbing air pressure of the nozzle tip(P) the bounding height of seed from the vibrated bottom plate of seed hopper and the seeding speed were selected based on the weight of a grain of seed(W). The treated materials were pepper seed as the flat type, cucumber seed as the oval type and radish seed as the spherical type. The optimum operating conditions of the experimental seeder were revealed as follows: 1. The height of the seed bounding from the bottom plate of seed hopper and the distance from nozzle tip to bounded seed were 5 mm and 0.5 mm at all seeds. The hole diameter of the nozzle and the absorbing pressure for pepper seed, cucumber seed and radish seed was 0.45 mm, 0.65 mm. 0.65mm and 39.2 kPa, 88.3 kPa, 58.8 kPa, respectively. 2. The absorbing pressure P was represented as P=η.4W/$\pi$d$^2$ where η was 100. The seeding speed using a 128 cell tray was 2.4 cm/s which was same transfer as 2.5 trays per minute. 3. The maximum seeding rate in case of the pepper seed was 97% the cucumber seed was 95% and the radish seed was 100% under the optimum operating conditions of the seeder.

• 한국잡초학회지
• /
• 제15권4호
• /
• pp.270-277
• /
• 1995

본 연구는 안개제조 장치가 설치된(Auto foggy system: SAE KI RTN Co.) 온실내 tray 시험으로 수행되었으며 시험결과를 요약하면 다음과 같다. 1. 안개조건하에서 배추의 엽수와 지상부 생체중에는 차이가 없었으나, 초장은 더 증가하였다. 2. 안개조건하에서 40일과 60일 경합처리로 초장이 감소되었으나 엽수에서는 차이가 없었다. 그리고 지상부 생체중은 전 경합기간의 안개조건하에서 감소하였고 특히, 40일(日) 경합구에서 감소정도가 큰 경향이었다. 3. Pendimethalin과 Napropamide 처리로 지상부 생체중은 안개조건하에서 감소하였고, 엽수는 Pendimethalin 처리에서만 이식후 60일에 감소하였다. 4. Pendimethalin, Napropamide 및 Alachlor 처리에서는 안개와 비안개간에 방제효과상의 차이가 없었고 Trifluralin에서는 처리일수가 경과함에 따라 바랭이 유묘출현하게 되므로써 안개조건하에서 방제효과가 낮아지는 경향이 있었다.

• 한국작물학회지
• /
• 제60권4호
• /
• pp.412-420
• /
• 2015

Even though phosphorus (P) is essential element for plant growth and development, it is not enough for crop production in soil. To breed more P deficient tolerance rice, screening and selection in rice population is needed. We tried to develop more simple and rough screening method for breeding of P deficient tolerance rice. In P deficient condition, tiller number was dramatically decreased among yield components in rice. Though this result, we confirmed tiller number could be the best marker in screening of P deficient tolerance rice. 480 rice genetic resources were cultivated in rice bed tray filled with P deficient soil for four weeks and each dry weight was measured. Among them, the 55 kinds of genetic resource were selected then cultivated in paddy field with 3 fertilizer conditions. Plant dry weight and tiller number in ripening stage were shown significant difference according to P condition. Plant dry weight and tiller number in ripening stage was highly correlated especially in P deficient condition. Furthermore, the tiller number in ripening stage and plant dry weight in rough screening were shown high degree correlation. Though these results, we might expect measuring of plant dry weight after cultivation in rice bed tray filled with P deficient soil could be a simple and effective screening method in selection of P deficient tolerance rice.

• 한국자동차공학회논문집
• /
• 제21권5호
• /
• pp.8-14
• /
• 2013

In this study, we propose the method of optimally selecting material of front pillar (A-pillar) and package tray for minimizing weight while satisfying vehicle requirements on static stiffness and dynamic stiffness. First, we formulate a material selection optimization problem. Next, we establish the CAE procedure of evaluating static stiffness and dynamic stiffness. Then, to enhance the efficiency of design work, we integrate and automate the established CAE procedure using a commercial process integration and design optimization (PIDO) tool, PIAnO. For effective optimization, we adopt the approach of metamodel based approximate optimization. As a sampling method, an orthogonal array (OA) is used for selecting sampling points. The response values are evaluated at the sampling points and then these response values are used to generate a metamodel of each response using the radial basis function regression (RBFr). Using the RBFr models, optimization is carried out an evolutionary algorithm that can handle discrete design variables. Material optimization result reveals that the weight is reduced by 49.8% while satisfying all the design constraints.

• 한국통신학회논문지
• /
• 제38A권7호
• /
• pp.592-602
• /
• 2013

본 논문은 광케이블 접속함체 및 광선로 감시 시스템을 다룬다. 기존의 광케이블 접속함체는 B2B, B2C 회선을 개통할 때 현장 작업자들이 접속함체 개.폐시 실시간으로 중앙제어부에서 인지 할 수 있는 시스템이 없었다. 이런 상황의 해결 방법으로 광선로 실시간 상태감시, 광선로 절단 시 경보 발생 및 즉각적인 절단 위치를 탐색, 감시형 접속함체의 개.폐 경보 발생, 광선로의 손실 변화 상태를 주기적으로 측정하는 시스템을 고려할 수 있는데, 본 논문은 광케이블 접속함체 내부에 커넥터와 트레이를 설치하여 작업자들이 이런 소자들을 분리하면 광신호가 차단되어 중앙관제에서 OTDR를 통해 실시간 감지되어 경보를 발생하도록 하는 감시 시스템에 관한 연구이다. 이러한 연구는 신속하고 효과적인 광선로 운용을 통해 망 품질 안정화에 기여 할 수 있다.

• Korean Chemical Engineering Research
• /
• 제45권1호
• /
• pp.39-45
• /
• 2007

분리벽형 증류탑의 구조 설계를 위한 shortcut 방법으로서 기존의 Fenske-Underwood 식을 3기 일반 증류탑 배열에 확장 적용하는 방법을 제안하였다. 제안된 방법으로 초기 설계 단계에서 분리벽형 증류탑의 공급단 위치, 분리벽 구간, 중간 제품 생산단의 위치를 간편하면서도 효과적으로 결정할 수 있는 것을 확인하였다. 제안된 방법에 의하여 구조 설계가 이루어진 분리벽형 증류탑과 기존의 연속 2기 증류공정 간의 분리 효율을 비교하기 위해 HYSYS를 사용하여 다양한 원료 조건에 대하여 전산모사 실험을 수행하였다. 그 결과 제안된 분리벽형 증류탑이 기존 연속 2기 증류공정 대비 16％에서 65％까지 에너지를 절약할 수 있음을 확인하였다. 또한 분리벽형 증류탑에 의한 분리 성능 향상 정도는 중간 비점 물질의 조성에 크게 의존하며 중간비점 조성이 우세할수록 유리함을 확인하였고, 최적 에너지 분포 영역 경향은 원료 혼합물의 ESI 값에 의하여 결정됨을 알 수 있었다.

• Korean Chemical Engineering Research
• /
• 제45권1호
• /
• pp.52-56
• /
• 2007

반응 증류탑은 반응기와 분리공정을 결합하여 에너지 사용량을 줄이고 공비 혼합물의 분리를 용이하게 할 수 있어 현장에서 많이 활용하고 있으나 공정의 설계에 많은 어려움이 있다. 화학공정의 설계와 운전 성능 평가에 많이 사용하는 상업용 설계 프로그램을 반응 증류탑의 설계에 활용하면 이러한 어려움을 해결할 수 있으나 증류단에 반응을 추가하는 것이 쉽지 않다. 본 연구에서는 이러한 문제점을 해결하여 TAME 공정을 상업용 설계 프로그램으로 시뮬레이션 할 수 있게 하였으며 이를 이용하여 TAME 공정의 설계 시 다음과 같은 고려 사항을 제시하였다. 반응단의 수를 증가 시키는 것보다 감소할 때 하부제품의 TAME 농도 변화가 더 크게 나타나며 비반응단의 수를 증가하여도 제품의 농도를 상승시킬 수 없다. 또, 재비기의 공급 열량 증가는 반응단에서의 체류 시간 감소에 따른 전화율 감소를 가져와서 제품의 농도를 저하시킨다.

• 대한인간공학회지
• /
• 제28권3호
• /
• pp.125-134
• /
• 2009

The muscle strengths in various postures are used in our daily life with or without our recognition. Also, many works are still performed with strengths, although mechanization and automation have been fairly accomplished at the industry site. Since the late seventies, various body measurements have been conducted periodically in Korea, however, muscle strengths have not been measured actively. For this reason, the muscle strength data have been hardly accumulated. The aims of this study are to learn more about the physical strength of young-aged Koreans and to provide basic information for designing equipments, tools and facilities in the work site and daily life. The muscle strengths that are related to shoulder and upper limbs joints, which are used frequently, are measured in this study. Eighteen muscle strengths, from seven different movements such as elbow flexion, elbow extension, shoulder abduction(seated), shoulder adduction(seated), shoulder rotation(internal and external), lifting a tray, and turning a key(inward and outward) were measured. For every movement, the muscle strengths for both hands were measured. In each measurement, five seconds averaged value and peak value were collected. Comparing the average value, the strength of shoulder adduction was the strongest for male and female, while strength of turning a key inward with left hand was the weakest for male and female. Strengths of preferred hand in elbow extension, shoulder abduction, shoulder external rotation, lifting a tray, and turning a key were stronger than those of non-preferred hand for both male and female. Rohrer's index considerably had an effect on muscle strength. The results of this study can provide some basic information not only in designing the equipment and facilities in work site or daily life, but also in selection, training and management of workers.