• Journal of People, Plants, and Environment
• /
• v.24 no.5
• /
• pp.499-507
• /
• 2021

Background and objective: This study was carried out to develop an effective technique for raising seedlings of Veronica pyrethrina Nakai, a native plant species in the Korean Peninsula, in plug trays. Methods: To investigate the optimum plug cell size and sowing media, we sowed seed in to plug trays with 34, 21, and 10 mL cells and filled with a commercial horticultural substrate and mixtures of peatmoss and perlite in 1:1, 3:1, and 4:1 ratios. Fertilization levels were set at 0, 500, 1000 and 2000 mg·L^-1. Results: Plug cell size did not significantly influence the seedling growth of V. pyrethrina. By substrate type, the growth rate was highest in the horticultural substrate, followed by 4:1, 3:1, and 1:1. Growth by fertilization level was higher in all fertilized treatment groups than in the control group, and there was no difference among 500, 1000, and 2000 mg·L^-1. Conclusion: The results of this study proved that it is most suitable for raising seedlings of V. pyrethrina to sow the seeds in a 10 mL cell plug tray filled with horticultural substrates, and apply fertilizers with less than 500 mg·L^-1 concentration.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.4
• /
• pp.346-351
• /
• 2014

Suction dentures enhance retention and support by forming negative pressure temporarily at the internal surface of denture base at times of swallowing and chewing because the areas surrounding the denture flanges are sealed by mobile mucosa. In this case, an 81-year-old male visited for new dentures. Considering the high expectations for retention and masticatory efficiency of dentures, fabricating complete dentures with suction dentures was planned. Preliminary impression was taken without applying pressure on retromolar pad area and diagnostic cast was fabricated. Afterwards, individual tray was made and final impression was taken, at the same time, gothic arch tracing was done to acquire centric relation and vertical dimension. Then, anatomic teeth were placed on maxilla and non-anatomic teeth were placed on mandible forming lingualized occlusion. Consequently, restoring a complete edentulous patient with complete dentures using mandibular suction denture resulted in recovering satisfying retention and function.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.2
• /
• pp.35-49
• /
• 2016

Dopo was the clothing of the Joseon period, which had a strong value of Confucianism. Apart from the kings and princes, government officers and Confucian literati wore Dopo as their official clothing and the uniform. The basic form of Dopo had the straight collar similar to Jikryeong. The difference is the shape of a Mu, which was fixed inside or on the back section along the side line of the front section and made two flaps on the back section. The clothing found in the tombs of Bae Cheonjo (1532~?) are from the mid-16th century to the early 17th century with the clothing style of the early Joseon period. The outer collar of all clothing was the shawl collar except for the Sibok and the inner collar was sewn to this. Two items had square tray collars, which were folded in half and sewn inside in half. The sleeve had a straight inseam from the armhole and its end around the wrist was round and wide. The carp-shaped inseam of the sleeve and wide sleeve indicated a change of sleeve shape. The shapes of the collars and the wide overlapped section of the dual collars demonstrated the shapes of the initial outer robes. The man's outer coats with wide sleeves were mostly cotton-quilted clothing. As described above, this paper examines the basic shapes of outer robes including Sibok, Jikryeong and man's outer coats on the basis of the clothing and artifacts from the tomb of Bae Cheonjo (1532~?) and examined the shapes, composition and features of Dopo. This paper aims to improve awareness of the wisdom and spirit of ancestors in life hidden in the sewing of the three Dopo items and on the importance of historical research.

• Food Science and Preservation
• /
• v.21 no.6
• /
• pp.838-843
• /
• 2014

In this study, near-infrared spectroscopy was used to observe the drying non-uniformity of vegetables such as spring onions, onions, and garlic, which are commonly used for seasoning. For the warm-air convection drying method, the vegetables showed drying non-uniformity, which is due to the unevenness of the wind temperature and humidity depending on the height and position of the drying tray. The second derivative spectra between the vegetable samples with different drying degrees were compared. The peak at around 1,390~1,400 nm, which is assigned to weak hydrogen bonds of water, was changed during drying whereas the peak near 1,420 nm, which represents strong hydrogen (H-) bonds of water, was not changed, indicating that water with weak H-bonds evaporates first during drying, and that water with strong H-bonds remains after drying. The hyperspectral NIR imaging technique combined with principal-component analysis made it possible to discriminate the dried vegetables according to their drying degree.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.4
• /
• pp.360-365
• /
• 1993

The infant seedling of rice(8-to 10-day-old) has often suffered from submergence just after transplanting due to the too short seedling height, 5 to 8cm, This experiment was conducted to elucidate the effect of gibberellic acid($GA_3 : 25% soluble liquid) with the application methods of foliar spray and seed-soaking on the elongation of seedling height of infant rice seedling in machine transplanting, We used a japonica rice variety, Hwaseongbyeo, and the seeding rate was 200g per seed tray(30$\times60$\times3cm). Generally,$GA_3 and Metalaxyl increased the elongation of seedling height of infant seedling while Tetracycle decreased the seedling height, To increase the seedling height of infant seedling, the foliar spary application of $GA_3 was better than seed-soaking treatment. The optimum concentration of $GA_3 for the foliar spray was about l0ppm and the optimum application time of $GA_3 was 3 to 4 days after sowing.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.2
• /
• pp.238-247
• /
• 2004

Statement of problem: Major objective in making on implant-supported prosthesis is the production of superstructure that exhibits a passive fit when connected to multiple abutments. One requirement to ensure passive fit is to make an accurate impression. Purpose : The purpose of this study was to compare the accuracy of master cast fabricated by using different impression methods at the different impression levels. Material and method: The master model used in this study was resin block having low implant analogs. Impression method studied were 1) direct method on fxiture level (Group FIX-D), 2) indirect method on fixture level(Group FIX-I), 3) modified indirect method on fixture level(Group FIX-M), 4) direct method on abutment level(Group AB-D) and 5) indirect method on abutment level(Group AB-I). Each of the five groups took 10 impressions. Fifty impressions were made for master cast by using Impregum $F^{(R)}$ impression material loaded on individual tray. Three dimensional measuring microscope was used to measure the inter-implant distance. Error rate of each inter-implant distance were calculated and evaluated. Results : The results were as follows. 1. Group FIX exhibited higher accuracy than group AB. 2. In group FIX, modified indirect method showed the highest accuracy, while indirect method showed the lowest accuracy. In group Ab, indirect method showed the higher accuracy than direct method. 3. Group FIX showed larger horizontal error than group AB. But, group AB showed the larger vertical error than group FIX. 4. Group Fix-M showed smallest vertical and horizontal error. Conclusion: An impression method have more effect on accuracy of master model than an impression level. A modified indirect method showed smallest vertical and horizontal error.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.1
• /
• pp.64-69
• /
• 2018

Odontogenic myxoma of the jaws is a rare benign odontogenic tumor. In this case, a 61-year-old male patient had a chief complaint about maxillary anterior gingival mass and excisional biopsy result confirmed odontogenic myxoma. The clear acrylic resin custom tray was designed to minimize displacement of flabby tissue which remained after the surgery. Neutral zone and external impression technique could provide satisfactory result in terms of denture stability and retention during jaw relation record and wax denture try-in procedure. This clinical report describes fabrication of complete dentures for a patient with odontogenic myxoma in regard to flabby tissue and neutral zone.

• Horticultural Science & Technology
• /
• v.35 no.4
• /
• pp.439-445
• /
• 2017

Transplant production in a plant factory with artificial lighting provides several benefits; (1) rapid and uniform transplant production, (2) high production rate per unit area, and (3) production of disease free transplants production. To improve the growth of runner plants when strawberry transplants are produced in a plant factory, we conducted two experiments to investigate (1) the effect of different light intensity for stock and runner plants on the growth of runner plants, and (2) the effect of different container volume for runner plants on their growth. When the stock and runner plants were grown under nine different light conditions composed of three different light intensities (100, 200, and $400{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPF) for each stock and runner plants, increasing the light intensity for stock plants promoted the growth of runner plants, however, the growth of runner plants was not enhanced by increasing the light intensity for runner plants under same light intensity condition for stock plants. We also cultivated runner plants using plug trays with four different container volumes (21, 34, 73, and 150 mL) for 20 days after placing the stock plants, and found that using plug trays with lager container volume did not enhance the growth of runner plants. These results indicate that providing optimal condition for stock plants, rather than the runner plants, is more important for increasing the growth of the runner plants and that the efficiency of strawberry transplant production in a plant factory can be improved by decreasing light intensity or container volume for runner plants.

• Journal of Biosystems Engineering
• /
• v.36 no.6
• /
• pp.434-443
• /
• 2011

A large scale seeding system was stable in terms of techniques but a convenient seeding system of small size was unsettled. This study was performed to develop a semi-automatic seeder for small and medium sized scale farm. To investigate optimum needle diameter and vacuum pressure was used vacuum suction needle seeder. Although the needle diameter according to the kinds of seed was different, the needle diameter for salvia and lettuce seed was suitable for 0.34 mm needle nozzle and 0.4 mm taper nozzle. The prototype consisted a seeding frame attached with needle nozzle, seed hopper, vibrating device, seeding part, vacuum ejector, seed tube etc.. As the result with the experiments, the seeding rate of the seeder was 92% and more at 0.34 mm diameter needle nozzle and 0.4 mm taper nozzle. Eccentric weight for seed hopper vibration was suitable that weight is 11 g and eccentric distance is 0.5 mm. Vibration acceleration of upward direction was 0.363 m/$s^2$. Working capacity of the seeder was possible 160 trays per hour. It was possible for sowing small seeds but it was required to make compact and simple model.

• Korean Journal of Food Science and Technology
• /
• v.29 no.1
• /
• pp.21-25
• /
• 1997

Application of the color indicators to kimchi packages was investigated in order to monitor the ripeness of commercial kimchi products during storage and distribution. Kimchi was packed in polypropylene (PP) tray and nylon/cast polypropylene (Ny/CPP) lid where the indicating sachet consisting of $CO_2$ absorbent and chemical dye (bromocresol purple and methyl red) was attached. The ripeness of kimchi during storage at $0{\sim}20^{\circ}C$ was measured in terms of pH and titratable acidity (TA), which were compared with Hunter color values of the indicators. The color of bromocresol purple dye turned from light blue to purple, while that of methyl red turned from light yellow to red. Regardless of the storage temperatures, Hunter b values of bromocresol purple type and Hunter a values of methyl red type appeared to be proportional to both the pH and TA values of kimchi. These results suggest that the color indicators be employed as one of the effective techniques for sensing the ripeness of packaged kimchi products without destructing the package.