• The Journal of the Korean dental association
• /
• v.55 no.1
• /
• pp.72-81
• /
• 2017

Regardless of the type of impression being made, the tray is the most important part of the impression-making procedure for completely edentulous patients. Dentists have to make use of a combination of rigid, thermoplastic, and resilient materials and control step-by-step procedure from irreversible hydrocolloid impression to definitive cast fabrication. For successful edentulous impression, some considerable clinical tips were guided.

• Korean Journal of Child Studies
• /
• v.32 no.3
• /
• pp.163-184
• /
• 2011

This study was conducted in order to inquire into the impact of children's self-concept construction and ego-development enhancement during Group Sandplay Therapy. The Group Sandplay Therapy sessions were held once week, for a total of 20 weeks. The Group Sandplay Therapy Process consisted of playing with sand and creating a sand tray in groups. There were two group in total. Each group had 4 children of the same sex aged from six to seven years old. In order to study the self-concept and ego-development, we used a self-concept test and ego-development as a research tool. In addition, the present research analyzed any changes which tool place by dividing each aspect in each sand tray of the therapy process into a positive subject and a negative subject, and analyzed the changing patterns seen in the sand tray worldas it unfolded. It was proven that an efficient treatment in changing the sand tray world and children's action, had an effect on rearranging the children's mental schemas. In terms of the progress of the sandplay journey, it was seen that negative elements decreased dramatically and positive elements were observed to have increased. As a result it was confirmed that Group Sandplay Therapy had a number of positive effects in the construction of children's self-concept and in terms of the enhancement of children ego-development.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.6
• /
• pp.448-452
• /
• 2002

The purpose of this study was to determine the optimum sowing amount for raising rice seedlings in automatic facility. four levels of seeding amount, 200, 220, 250 and 300 tray were applied to compare the seedling characteristics according to seeding density. Sowing dates were fixed at May 10 for single cropping and June 10 for double cropping. The seedling height was taller as the increase of sowing amount from 200g to 300g/tray, however the seedling quality was decreased with increasing of seed density. At 40-50 days after transplanting, there was no significant difference in the plant height and tiller number among the rice seedling raised under different seeding densities. Grain yield of 15-day old seedlings transplanted at May 25 was not significantly different among four different levels of seeding amount. However, the yield of 10day old seedling transplanted at June 20 was significantly higher in seeding density of 250g/tray than that of 300g/tray.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.2
• /
• pp.120-125
• /
• 2018

Conventional denture impression techniques have limitations for edentulous patients with severe alveolar bone resorption and can cause problems from excessive border extension. Especially when a patient has movable tissue it is difficult to make accurate impression, thus might interrupt stable seating of complete denture. Fabrication of complete denture using closed mouth technique for edentulous patient with severe ridge resorption is thought to provide better stability and retention. In this case, an 86-year-old patient had both edentulous jaws with epulis fissuratum on maxillary anterior ridge and severe mandibular ridge resorption. Thus, tentative vertical dimension was determined by using Centric trayand individual tray attached with gothic arch tracer was fabricated. Complete denture was fabricated using closed mouth technique and the patient was satisfied with better stability and retention of the complete denture.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.336-336
• /
• 2017

High mortality and slow growth of seedling generally occurred in tray due to cold, foggy weather and severe seedling blight. Mechanical transplanting is hampered, farmers having economic loss. A sustainable method for raising mat type seedling is necessary. Experiments were conducted on disease control and seedling growth in dry seasons. Fungicides treated/untreated seeds were sown 120-130g in each tray containing pulverized fine grain loam/sandy loam soils. Seed covered with a thin layer of soil and irrigated. It was polythene covered (PC) for 72h and then every night along with 2/3 sprinkler irrigation (SI) per day. Untreated seedlings infected 53-93%. Pyraclostrobin, Azoxystrobin and Azoxystrobin+Difeconazole treated seeds/sprayed (72h) seedlings had no disease. Seedling height was 11.7-13.2 cm with compact and thick root mat at 25 days. Seeds treated at 0.2-0.3% (18-20h) showed no disease but severely in untreated seeds in all locations. Seedling height (13.8 cm), leaf age (3.7) and root number (8.5) were better when NPK were applied at 3-4-3 g/tray. Spraying of urea (1%) in addition with MOP, theovit and $ZnSo_4$ at 0.6-0.6-0.2% on 7 and $15^{th}$ days was also effective. PC showed significant growth (29.1-34.5%). Root mat was not good in flooded irrigation (FI). Disease was higher in SI (66.7-97.3%) than FI (0.7-3.7%) in untreated seeds regardless of polythene use. The protocol would be effective for raising mat type seedling in cold environment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.52-60
• /
• 2015

Static electricity is an imbalance of electric charges within or on the surface of a material. All packed items that are particularly sensitive to static discharge must be protected by antistatic treatment. Otherwise, static electricity generated by an electrical insulator may cause serious damages to some sensitive electronics. In order to remove or prevent a buildup of static electricity, packed items must be treated with the application of an antistatic agent, which helps any excess charge to be evenly distributed. Functional pulp tray used for packing of electronic goods was developed with application of an antistatic agent. As the concentration of the antistatic agent increased, charging voltage and surface resistance of molded pulps decreased. The increase of humidity in surrounding atmosphere around molded pulps led to the decrease of accumulation of static charges. In conclusion, the surface treatment of the antistatic agent not only reduced or eliminated buildup of static electricity in the surface, but also prevented generation of tiny dirts from molded tray.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.5
• /
• pp.622-632
• /
• 2005

Statement of problem: Silicone Index Tooth Tray impression system which does not use gingicord has a shortcoming. It takes time to remove internal wall of Silicone Index Tooth Tray for space of wash impression material. Purpose: This study was to evaluate whether providing certain space to impression body can prevent from doing complicated laboratory work. Material and methods: After mounting metal dies with shoulder and chamfer margins arbiturarily, SITT was produced using $Blu-mousse^(R)$. In one experimental group, wash impression was taken using $Fit-tester^(R)$ without removing interior surface of SITT and in the other group, wash impression was taken using $Fit-tester^(R)$ providing 0.5mm space in the SITT and then compared the differences in two groups. Results: 1. There was no significant difference between a group which did not allow space and a group which granted equal 0.5mm space. 2. There was no significant difference between gingival diameter, occlusal diameter of metal die that has shoulder margin and gingival diameter, occlusal diameter of metal die that has chamfer margin. 3. There was no significant difference between a group which did not take pick-up impression and a group which took pick-up impression through relining method using SITT 4. There was no significant difference between a group that poured immediately after taking primary impression and a group that poured after removing poured stone die. Conclusions: When taking an impression of an abutment using SITT impression system, it is considered to obtain clinically identical results between a group that did not grant a 0.5mm space within SITT for wash impression and a group which invest a space. Furthermore, it is considered possible to produce an individual die through secondary pouring.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.514-522
• /
• 2014

A new type of high precision electromagnetic suspension (EMS) which can support heavy tray along long stroke rail is proposed in this paper. Compared with the conventional EMS, the suggested moving-core typed EMS has the levitation electromagnets (EMs) on the fixed rail. This scheme has high load capability caused by iron-core and enables simple tray structure. Also it does not have precision degradation caused by heat generation from EMs, which is a drawback of conventional EMS. With these merits, the proposed EMS can be an optimal contactless linear bearing in next generation flat panel display (FPD) manufacturing process if the ability of long stroke movement is proved. So a special Section Switching Algorithm (SSA) is derived from the resultant force and moment equations of the levitated tray which enables long stroke movement of the tray. In order to verify the feasibility of the suggested SSA, a simple test-setup of the EMS with 2 Section-changes is made up and servo-controlled in the simulation and experiment. The simulation shows the perfect changeover the EMs, and the experiment shows overall control performance of under ${\pm}40{\mu}m$ gap deviations. These results reveal that the newly suggested contactless linear bearing can simultaneously achieve high load capability and precision gap control as well as long stroke.

• Journal of Radiation Industry
• /
• v.7 no.2_3
• /
• pp.115-119
• /
• 2013

The density profile measurement technology by gamma transmission has been widely used to diagnose processes in the field of refinery and petrochemical industry. This technology can reveal a clue and position of abnormal phenomenon of industrial processes during their operation. In this paper, the feasibility of the gamma transmission technology for detecting changes in the amount of fluid in a distillation column was evaluated by using Monte Carlo simulations. The simulations assumed that $^{60}Co$ (1.17, 1.33 MeV) sources and NaI (Tl) detectors (${\Phi}5{\times}5cm$) are located in opposite sides of a column and it concurrently moves in vertical direction. To determine the dependency of a spatial resolution on aperture size of a collimator, the simulation model for a tray in a column were simulated with the aperture sizes of 1 and 2 cm. The thickness of the high density area including a tray and fluid was 7.6 cm in the simulation. The spatial resolution of the tray was 8.2 and 8.5 cm, respectively. As a result, it was revealed that the conventional density profile measurement technique is not able to show the deviation of liquid level on a tray in a column.

• Food Science and Industry
• /
• v.50 no.2
• /
• pp.12-26
• /
• 2017

Processing steps such as washing and cutting, involved in preparing fresh-cut produce causes tissue damage, leading to rapid quality deterioration. Major defects of fresh-cut produce are discoloration, softening, off-odor development, and microbial growth. Packaging of fresh-cut produce has been changed to reduce these quality problems. Flexible packaging film is widely used to pack fresh-cut produce. Vacuum packaging was the popular packaging method in the beginning of fresh-cut industry in Korea. Vacuum packaging creates high $CO_2$ and low $O_2$ levels to control browning of fresh-cut produce. However, these conditions induce some visual defects and off-odor development. Discoloration problem was also found when fresh-cut produce was packaged with conventional packaging film or plastic tray. Modified atmosphere (MA) packaging is effective for prolonging shelf-life of fresh-cut produce by decreasing $O_2$ and increasing $CO_2$ concentration in the package. Retail MA packaging using different oxygen transmission rate (OTR) film and micro-perforated film has started to be applied to fresh-cut produce in Korea. Proper MA package design that provides optimum range of $O_2$ and $CO_2$ partial pressures is one of the major challenges in the industry. An initial package flushing with $N_2$ or an low $O_2$/high $CO_2$ atmosphere is also used to more rapidly establish steady-state MA condition. Film OTR and $O_2$ flushing affects the fermentative volatile production, off-odor development, electrolyte leakage, discoloration, $CO_2$ injury, microbial population of fresh-cut produce. There is also a demand for convenient packaging to attract consumers. Rigid fresh-cut produce container for retail market has increased since the packaging provides excellent protection from physical damage during transport. Rigid tray used as actual serving vessel for the consumer is increasing in Korea. The tray with flexible lid to wrap or seal fresh-cut produce is more and more gaining popularity. Further practical technology to control quality change and microbial growth for each fresh-cut product has been studied since various fresh-cut items were required. The fresh-cut industry also focuses on searching for more convenient and environmentally friendly packaging.