• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.111-118
• /
• 2002

A new lithium niobate optical modulator with a polymer buffer layer on Ni in-diffused optical waveguide is proposed for the fist time, successfully fabricated and examined at a wavelength of 1.3 mm. By determining the diffusion parameters of Ni in-diffused waveguide to achieve more desirable mode size which is well matched to the mode in the fiber, the detailed results on the achievement of high optical throughput are reported. In addition, the usefulness of polymer buffer layer which can be applicable to a buffer layer in Ni in-diffused waveguide devices is demonstrated. Several sets of channel waveguides fabricated on Z-cut lithium niobate by Ni in-diffusion were obtained and on which coplanar traveling-wave type electrodes with a polymer-employed buffer layer were developed by a conventional fabrication method for characterizing of electro-optical performances of the proposed device. The experimental results show that the measured half-wave voltage is of ~10 V and the total measured fiber-to-fiber insertion loss is of ~6.4 dB for a 40 mm long at a wavelength of =1.3 mm, respectively. From the experimental results, it is confirmed that the polymer-employed buffer layer in LiNbO3 optical modulator can be a substitute material instead of silicon oxide layer which is usually processed at a high temperature of over $300^{\circ}C$. Moreover, the fabrication tolerances by using polymer materials in LiNbO3 optical modulators are much less strict in comparison to the case of dielectric buffer layer.

• 한국광학회지
• /
• 제14권5호
• /
• pp.545-554
• /
• 2003

Ti:LiNbO$_3$세 도파로 방향성 결합기와 CPW진행파 전극으로 구성된 완전 스위칭이 가능한 외부 광변조기를 설계, 제작하였다. 결합 모드 이론을 이용하여 세 도파로 광결합기의 스위칭 현상을 해석하였으며, 유한차분법을 이용하여 단일 모드를 갖는 광도파로의 설계 및 공정 파라미터를 도출하였으며, 이를 이용하여 광 결합길이를 계산하였다. 등각사상법과 반복이완법을 이용하여, CPW구조 진행파 전극의 특성임피던스와 M/W(Micro wave)유효굴절률 정합조건을 동시에 만족하는 설계 파라미터를 도출하였다. 제작된 세 도파로 광변조기의 삽입손실과 스위칭 전압은 약 4㏈와 19V였으며, S 파라미터를 측정하여 특성임피던스 Z$_{c}$=45 Ω M/W 유효굴절률 N$_{eff}$=2.20, 그리고 감쇠상수 $\alpha$$_{0}$=0.055/cm√GHZ 등의 진행파 전극 파라미터를 추출하였다. 추출된 진행파 전극 파라미터를 이용하여 이론적인 주파수 응답 R($\omega$)을 계산하였으며, Photo Detector로 측정된 주파수 응답과 비교하였다. 주파수 응답 측정 결과, 3㏈ 변조대역폭은 13 GHz로 측정되었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.61-65
• /
• 2001

A new flaw detection technique using by SH angle beam method has been discussed. The SH-wave is horizontally polarized shear wave and the surface SH wave has a characteristic of traveling along near surface layer. The surface SH wave technique is valuable for the detection of fatigue cracks at fillet weld heels which cannot be detected by other ultrasonic technique such as angle beam technique and The dispersion curves of it has simple characterization. In this work, using these beneficial chraterization, quality evaluation of spot weld with ultrasonic sound intensity of SH-wave passing through nugget area of spot weld are verified experimentally.

• 한국통신학회논문지
• /
• 제21권2호
• /
• pp.495-504
• /
• 1996

본 논문에서는 슬롯결합 급전구조를 갖는 직렬급전 마이크로스트립 배열 안테나의 정확한 해석 및 설계방식을 제시하고 그 특성을 분석하였다. 슬롯결합 급전구조의 정확한 해석은 급전선에서의 진행파 모드와 비진행파를 모드를 모두 고려하는 full-wave방법과 안테나간의 회로적인 결합을 이용하여 해석하였다. 수치해석에 사용된 기저함수는 해의 수렴도, 정확도 및 계산시간을 비교하여 패치는 3개의 EB모드, 슬롯은 1개의 PWS모드, 급전선은 5개의 PWS모드를 사용하였다. 이러한 안테나 해석을 바탕으로 직렬급전 배열 안테나가 정재파형 구조로 설계되었다. 정재파형 구조에서 각 소자의 여기량을 조절하는 설계방식으로는 슬롯의 길이를 변화시키는 방식과 슬롯과 급전선과의 이격거리를 변화시키는 방식을 사용하였다. 본 논문에서 사용한 이론을 이용하여 8소자 Cheyshev배열 안테나를 설계하여 실험한 결과 슬롯과 급전선간의 이격거리를 조절하여 설계하는 방식이 각 소자간의 공진 주파수의 변화가 없으므로 슬롯의 길이를 가변시키는 방식보다 설계가 간편함을 알 수 있었고, 측정 결과도 우수하게 나타났다.

• 한국광학회지
• /
• 제15권4호
• /
• pp.375-384
• /
• 2004

Ti:LiNbO$_3$ 세 도파로형 광도파로와 CPW 진행파 전극으로 구성된 고속 외부 광변조기를 설계, 제작하였다. 결합모드 이론을 이용하여 세 도파로 광결합기의 스위칭 현상을 해석하였으며, 유한차분법을 이용하여 결합길이를 계산하였다. SOR에 의해 위상속도 및 특성 임피던스 정합 조건이 만족되도록 CPW 진행파 전극의 파라미터를 설계하였다. 제작된 소자의 dc 스위칭 및 전극의 RF 특성을 측정하였다. 제작된 세 도파로 광변조기의 삽입손실과 스위칭 전압은 약 4 dB와 15.6 V였다. RF 특성을 얻기 위하여 회로분석기(Network Analyzer)를 이용하여 진행파 전극의 S 파라미터를 측정하였다. 측정 결과 진행파 전극의 특성임피던스 Z$_{c}$=39.2$\Omega$, M/W(Microwave) 유효굴절률 N$_{eff}$=2.48, 그리고 감쇠상수 a$_{m}$ =0.0665/(equation omitted)등의 파라미터를 추출하였다. 추출된 진행파 전극 파라미터를 이용하여 이론적인 주파수 응답 R($\omega$)을 계산하였으며, 광 검출기로 측정된 주파수 응답 R($\omega$)과 비교하였다. 주파수 응답측정 결과, 3 dB 변조대역폭은 13 GHz로 측정되었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.163-177
• /
• 2021

Numerical simulations of the Vortex-Induced Vibration (VIV) about a large-scale flexible pipe subject to shear flow were carried out in this paper. Efficiency verification was performed firstly, validating that the proposed fluid-structure interaction solution strategy is competent in predicting the VIV response. Then, the VIV characteristics related to multi-mode and spanwise hybrid waveform about the flexible pipe attributed to shear flow were investigated. When inflow velocity rises, higher vibration modes are apt to be excited, and the spanwise waveform easily convertes from a standing-wave-dominated status to a hybrid standing-traveling wave status. The multi-mode or even multiple-dominant-mode is prone to occur, that is, the dominant mode is often followed by several apparent subordinate modes with considerable vibration energy. Hence, the shedding frequencies no longer obey Strouhal law, and vibration trajectories become intricate. According to the motion analysis concerning the coupled cross-flow and in-line vibrations, as well as the corresponding wake patterns, a tight coupling interaction exists between the structural deformation and the wake flow behind the flexible pipe. In addition, the evolution of the vortex tube along the pipe span and a strong 3D effect are observed due to the slenderness of the flexible pipe and the variability of the vortex shedding attributed to the shear flow.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1301_1302
• /
• 2009

Recently, there has been increased incessantly an interest in research area on micro-fluidic pump for electronic and biological applications. The proposed pump takes an unobtrusive operation into the simple displacing mechanism using peristaltic traveling waves without the physical moving valves. And, this piezopump makes up a panel type design. The ATILA simulation was performed to estimate the operating frequency of the vibrating wave mode, to optimize the design conditions of piezopump such as structure, elastic body material, piezoelectric ceramics, and to analyze the distribution of vibration displacement. The best measured value of the pumping rate is about $118{\mu}l$/min under the following parameters : 4-wave mode, 50kHz operating frequency, $200V_p$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.185-185
• /
• 2009

Micropump is very useful component in micro/nano fluidics and bioMEMS applications. Using the flexural vibration mode of PZT bar, a piezopump is successfully made. The PZT bar is polarized with thickness direction. The proposed structure for the piezo-pump consists of an input and an output port, piezoelectric ceramic actuator, actuator support, diaphragm. The traveling flexural wave along the bar is obtained by dividing two standing waves which are temporally and spatially phase shifted by 90 degrees from each other. Fluid is drawn into a forming chamber, eventually the forming chamber closes trapping the fluid therein. The finite elements analysis on the proposed pump model is carried out to verify its operation principle and design by the commercial FEM software. Components of piezopump were made, assembled, and tested to validate the concepts of the proposed pump and confirm the simulation results. The performance of the proposed piezopump the highest pressure level of 83.4kHz.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.119-120
• /
• 2008

Using the extensional vibration mode of PZT bar, a piezopump is successfully made. The traveling extensional wave along the circumference of the bar is obtained by dividing standing waves which are temporally and spatially phase shifted by 90 degrees from each other. The proposed piezopump is consisted of coaxial cylindrical shells that are bonded piezoelectric ceramic bar.

• 한국공작기계학회논문집
• /
• 제12권2호
• /
• pp.23-30
• /
• 2003

It is very important to detect and evaluate the surface or subsurface flaws because of their influences on mechanical properties of materials. Rayleigh wave and creeping wave are commonly used for the detection of surface and subsurface flaws. These techniques, however, have following problems. Each amplitudes are remarkably affected by the surface condition and evaluation of echo pattern is usually difficult because shear wave mode propagate in the material at the same time. On the other hand, surface SH-wave which is horizontally polarized shear wave traveling along near surface layer is an attractive technique for the surface or subsurface material characterization and this technique is useful to solve the problems mentioned above. In this paper, The stability and transmission coefficient of SH waves through a viscous fluid layer is theoretically studied and simulated. Its results agreed well with the theoretical expectation for the experimental verification. These experimental results show that viscosity of couplants, thickness of couplant and surface roughness are closely related to transfer efficiency in surface SH angle beam method.