• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.565-571
• /
• 2006

This study aimed to analyze access mode choice behavior for KTX Passengers. To fulfill the aims of this study, Dong-Daegu Station was selected as a station for a case study. This study takes place in two stages. These are (i) descriptive statistical analysis of transportation status before and after introduction of the KTX, (ii) empirical model estimation for analyzing access mode choice behavior. This study makes use of the data from travel survey from Daegu metropolitan area. The main part of the survey was carried out in the KTX Dong-Daegu station. The data was collected from a sample of 1,800 individuals. The survey data includes the information on travel from Dong-Daegu station to Seoul. From descriptive statistical analysis of transportation status before and after introduction of the KTX, it is found that revealed demand of the KTX is lower than that expected. Moreover, it is found that the low demand of the KTX stems from high cost for the KTX itself and inconvenience( including travel time and cost) of access mode. In order to analyze mode choice behavior for accessing Dong-Daegu station, multinomial logit model structure is used. For the model specification, a variety of behavioral assumptions about the factors which affect the access mode choice, were considered. From the empirical model estimation, it si found that access travel time and access travel cost are significant in choosing access mode. Given the empirical evidence, we see that improvement of access transportation system for Dong-Daegu station is very important for enhancing the use of KTX.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.288-298
• /
• 2017

The system of high-speed and conventional railway vehicles is diversified, and significant technological development in performance has been achieved. This study analyzed the modal change characteristics; furthermore, it estimated the value of travel time by improving the travel time and cost for the passenger's perception of railway. In this study, we formulate a mode choice model for passengers and compare it with the mixed logit model which reflects individual taste variation. In addition, the validity of the analysis is presented through an estimation the value of travel time using the derived model. For this purpose, a stated preference survey was conducted with 510 people using public transportation. The benefits of time-saving can be accurately determined by estimating the value of time spent on the railway. Appropriate fares for public transportation can also be estimated.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.1-12
• /
• 2012

This paper aims at developing an active expressway entrance control effectiveness analysis tool which operators can utilize and manage traffic based on current traffic condition. For this, after identifying the current problems of tollgate-based entrance policy being used, a new set of decision element such as congestion index, decision criteria for congestion, and congestion management unit has been proposed together with the procedure of newly developed tollgate control policy. Three key parts developed are traffic condition identification module, tollgate metering module, and travel speed calculation module. Some measures of effectiveness were also identified and the newly developed effectiveness analysis tool produced better result. According to classification of traffic condition by reference speed as 80km/h, the improved tollgate entrance procedure increased 21.5% in average travel speed compared with Do-Nothing case and also increased 8.8% compared with current entrance control method.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.105-116
• /
• 2007

A ROUNDABOUT is more effective way to improve safety and prevent delays than signal intersection. ROUNDABOUT has been known highly safe treatment that could be used as a method to reduce conflicts between vehicles, to reduce travel speed in inner or approach of intersection, and to have no speed difference between drivers than intersection. In this study, the effective analysis on the installation of ROUNDABOUT was carried out using computer-based simulation tool VISSIM, in order to evaluate performance and safety of ROUNDABOUT and develope a warrant. In conclusion, the results indicated that there was remarkable increase of Y-intersection capacity and decrese of delay, and improvement of traffic safety. Finally, A nice feature of this study is to firstly attempt to use microscopic simulator to evaluate the effectiveness of ROUNDABOUT and suggest a passible operation boundary.

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.71-79
• /
• 2023

In the field of agricultural machinery, various on-field tests are conducted to measure design load for optimal design of agricultural equipment. However, field test procedures are costly and time-consuming, and there are many constraints on field soil conditions due to weather, so research on utilizing simulation to overcome these shortcomings is needed. Therefore, this study aimed to model agricultural soils using discrete element method (DEM) software. To simulate draft force, predictions are made according to travel speed and compared to field test results to validate the prediction accuracy. The measured soil properties are used for DEM modeling. In this study, the soil property measurement procedure was designed to measure the physical and mechanical properties. DEM soil model calibration was performed using a virtual vane shear test instead of the repose angle test. The DEM simulation results showed that the prediction accuracy of the draft force was within 4.8% (2.16~6.71%) when compared to the draft force measured by the field test. In addition, it was confirmed that the result was up to 72.51% more accurate than those obtained through theoretical methods for predicting draft force. This study provides useful information for the DEM soil modeling process that considers the working speed from the perspective of agricultural machinery research and it is expected to be utilized in agricultural machinery design research.

• International Journal of Highway Engineering
• /
• v.14 no.4
• /
• pp.133-140
• /
• 2012

PURPOSES : Traffic situation of Seoul City is different each administrative district. because each administrative district population, average travel speed, etc are different. thus, regionally differentiated policy is necessary. METHODS : In this study, first, it is to implement the cluster analysis using the traffic factor of twenty-five administrative districts in Seoul, categorize it into the cluster and understand the properties. second, related factors of speed were derived. and method to increase the speed was investigated. we choose the eleven traffic factors such as the number of traffic accident cases, total length, speed, the number of cross section, the number of cross section per km, the rate of roads, registered cars, population attending office and school, population density, area. RESULTS : In the results, first, we could categorize the Seoul-City administrative district into three clusters. in order to find Factors associated with speed a simple regression analysis was performed. and the number of intersections per km is closely related to the speed. CONCLUSIONS : Through this study, transportation policies reflecting local traffic-related characteristics are required.

• Ocean and Polar Research
• /
• v.34 no.1
• /
• pp.85-91
• /
• 2012

Physical properties such as sound speed contrast (h) and density contrast (g) of the interested target are key parameters to understand acoustic characteristics by using theoretical scattering models. The density and sound speed of moon jellyfish (common jellyfish, Aurelia aurita s.l.) were measured. Sound speed contrast (h) was measured from travel time difference (time-of-flight method) of an acoustic signal in a water tank for APOP studies (Acoustic Properties Of zooplankton). Density contrast (g) was measured by the displacement volume and wet weight (dual-density method). The sound speed remained almost constant as the moon jellyfish increased in bell length. The mean values${\pm}$standard deviation of h and g were $1.0005{\pm}0.0012$ and $0.9808{\pm}0.0195$), respectively. These results will provide important input for use in theoretical scattering models for estimating the acoustic target strength of jellyfish.

• Journal of Welding and Joining
• /
• v.35 no.3
• /
• pp.35-43
• /
• 2017

A 3D transient heat transfer model is developed by ABAQUS software to study the temperature distribution during friction stir welding process at different rotational speeds. Furthermore, AA 5083-O plates were joined by FSW technique. For this purpose, a universal milling machine was used to perform the welding process and a mechanical vice was used to fix the work pieces in the proper position. The joints were friction stir welded at a constant travel speed 50 mm/min and two rotational speed values; 400 rpm and 630 rpm using two types of tools; cylindrical threaded pin and tapered smooth one. At each welding condition the temperature was measured using infra-red thermal image camera to verify the simulated temperature distribution. The welded joints were visually inspected as well as by macro- and microstructure evolutions. In addition, the welded joints were mechanically tested for hardness and tensile strength. The maximum peak temperature obtained was at higher rotational speed using the threaded tool pin profile. The results showed that the rotational speed affects the peak temperature, defects formation and sizes, and the mechanical properties of friction stir welded joints. Moreover, the threaded tool gives superior mechanical properties than the tapered one at lower rotational speed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.3 no.2
• /
• pp.23-31
• /
• 1997

The results of high speed photography, acoustic emission detection and plasma UV radiation intensity measurement during CO2 laser welding of stainless steel 304 are presented. Video images with high spatial and temporal resolution allowed to observe the melt dynamics and keyhole evolution. The existence of a high speed melt flow which originated from the part of weld pool and flowed along the sides wall of keyhole was confirmed by the slag motion on the weld pool. the characteristic frequencies of flow instability and keyhole fluctuations at different welding speed were measured and compared with the results of Fourier analyses of temporal acoustic emission (AE) and light emission (LE) spectra. The experimental results were compared with the newly developed numerical model of keyhole dynamics. (The model is based on the assumption that the propagation of front part of keyhole into material is due to the melt ejection driven by laser induced surface evaporation.) The calculations predict that a high speed melt flow is induced at the front part of keyhole when the sample travel speed exceeds several 10mm/s. The numerical analysis also shows the hump formation on the front keyhole wall surface. Experimentally observed melt behavior and transformation of the AE and LE spectra with variation of welding speed are qualitatively in good agreement with the model predictions.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.488-499
• /
• 1996

A propeller type mistblower was designed and manufactured. The machine consisted of a 770 millimeters diameter propeller driven by the power take off of a tractor. It delivered 26,400 cubic meters of air per hour and has the outlet speed about 180 kilometers per hour. Spray liquid was injected at 30 bars pressure through hollow cone type nozzles which were located around the air outlet of the machine bya poston type pump. Power consumption of the machine was found to be 12.46 kilowatts and the effective forward travel speed was about 2.7 kilometers per hour. Upon spraying mango trees, it was shown that the density of spray partices was about 100 microns and consumed 3.12 liters per tree. Working speed in 6 meters row spacing mango orchard was about one hectare per hour.