• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.740-745
• /
• 2001

The plastic deformation behavior of formed CICC fur the superconducting Tokamac fusion device was examined and appropriate manufacturing information was provided. A relation between travel of the bending roller and spring back displacement was obtained via virtual manufacturing. The radius of CICC after forming was expressed as a function of the bend-roll travel. The maximum von Mises stress after spring back was also monitored fur the SAGBO prediction. Next, the variation of the CICC cross-sectional area was examined during the first turn and during conduit bending with the largest curvature. Finally, the coil radius was measured and compared with the data generated from the virtual manufacturing. The measured data showed similar pattern as predicted one. Using the mapping function found to match with the real data, the data from the virtual manufacturing may facilitate accurate manufacturing.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6D
• /
• pp.539-547
• /
• 2012

Increasing the mode transfer volume between public transportation modes has known to be necessary for efficiency improvement of public transportation system operation and it is also found to be important to have relevant transfer point selection with reflection of current travel pattern. This study is in regards to providing a selection guideline for the location of transfer point between public transport modes. This case study has been carried out for Daegu Metropolitan City especially for public transportation users behaviour by analysis of daily usage of transportation card to identify the transfer travel pattern. A cluster analysis was applied to categorize the pattern of transfer stop which induces many users and a discriminant analysis also utilized for grouping the stops by number of transfer trip. This research produces the estimation result of transfer volume for urban railway system no.3 in Daegu City which is currently under construction. In addition, the locations of transfer center has also been proposed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1553-1558
• /
• 2014

The travel demand, peak hour ratio and forms of platform of urban railway stations are very different each other, also the users' behavior is. So the types of urban railway stations have to be classified according to these characteristics. However, the current methods of classification are arbitrary on the purpose of each studies and the legal standards are very simple; categorized by normal station vs. whistle station, types of trains, forms of platforms and shapes of architecture. This study clarifies the standards for classifying the types of urban railway stations, results the complete enumeration survey on all the urban railway stations in Seoul Metropolitan Area and makes the database based on the surveyed data, purposing on helping for making strategies and researching. On this study, utilizing the database which is established for this study, the correlation between the physical and geographical characteristics and users' travel patterns of urban railway stations is clarified by the statistical analysis. In the future, the statistical results will be helpful for making strategies and researching.

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.4
• /
• pp.759-770
• /
• 2014

The aim of this study is to examine how time-use and activities are affected by work hours. To achieve this, we focused on the weekday time-use of full-time workers in Seoul Metropolitan Area(SMA). The long 'work hours' are under active discussions since it is related to the quality of life. However, many Social researcher thought that problem of Korean working hours is linked to quality of life in the abstract. Because activity connects time-use and quality of life, the key point is activity under time constraints. Therefore, travel patterns should be understood by time-use and activity patterns. This study composes trip-chains from travel data of 2010 Household Travel Survey(HTS). Grouping trip-chains by activity patterns, we could make sure that a few of activities after work is affected by a short free time. This study has potential implications for the policy of work hours and traffic problems in the evening, and will provide new geographical perspective related to measuring quality of life.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5D
• /
• pp.597-604
• /
• 2009

The mass transit networks in Korea, such as buses, metro and subway, are co-related and the number of transfer points, in which a lot of pedestrian movement is generated, are rising. The functions of the transfer centers, in which several travel modes cross at a point, have to include convenience and comfort for pedestrians using the transfer centers, and such functions can make transit a more attractive travel option and thus eventually contribute to increases in ridership. However, the guidelines for station layouts and their assessments in transfer stations are not suggested so far. So the pedestrian pattern data (pedestrian walking distances and times, pedestrian approaching distances and times, pedestrian walking paths in the inside of stations) was collected and analyzed. Based on the results of the analysis, the ways to measure the quality of comfort for those who using transfer facilities were suggested using the times that pedestrians consume to transfer from a travel mode to another. The walking time of pedestrians at the inside of stations was also measured by pre-selected pedestrian pathways as the guidelines for station layout assessment in transfer facilities.

• Spatial Information Research
• /
• v.19 no.4
• /
• pp.11-20
• /
• 2011

In accordance with low carbon and green growth paradigm, a subway is one of major public transit systems for resolving traffic congestion and decreasing traffic accidents. In addition, as subway networks expand, passengers' travel pattern in the subway network change and consequently affect the urban structure. Generally, new subway route has been planned and developed, mainly considering a travel demand forecast. However, it is desired to conduct an empirical analysis on the forecast model regarding change of travel accessibility and passenger demand pattern according to new subway line. Therefore, in this paper, an alternative method, developed based upon a spatial syntax model, is proposed for evaluating new subway route in terms of passenger's mobility and network accessibility. In a case study, we constructed subway network data, mainly targeting the no 9 subway line opened in 2009. With an axial-map analysis, we calculated spatial characteristics to describe topological movement interface. We then analyzed actual modal shift and change on demand of passengers through the number of subway passenger between subway stations and the number of passenger according to comparative bus line from Smart Card to validate suggested methods. Results show that the proposed method provides quantitative means of visualizing passenger flow in subway route planning and of analyzing the time-space characteristics of network. Also, it is expected that the proposed method can be utilized for predicting a passengers' pattern and its impact on public transportation.

• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.15-25
• /
• 2006

This study was to investigate the impact of region-wide travel pattern on local fiscal capacity in the Seoul metropolitan area. The study adopted both factor analysis and regression modeling for it, while using fiscal-and travel-related variables as well as urban characteristics determining travel patterns. We used the former method to compress independent variables of travel and urban characteristics because of strong correlationship between them. Four factors identified by the analysis output were adopted in regression models with some dependent variables representing local fiscal capacity. Their results resulting from both analyses showed that local fiscal inequality within the metropolitan area is driven by region-wide travel Patterns such as total trips. inner trip ratio, and the ratio of trips from and to the Seoul city.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.13 no.2
• /
• pp.116-123
• /
• 2013

Currently, most automobiles have automatic transmission systems. The gear-shifting strategy used to generate shift patterns in transmission systems plays an important role in improving the performance of vehicles. However, conventional transmission systems have a fixed type of shift map, so it may not be enough to provide an efficient gear-shifting pattern to satisfy the demands of driver. In this study, we developed an intelligent strategy to handle these problems. This approach is based on a normalized radial basis function neural network, which can generate a flexible gear-shift pattern to satisfy the demands of drivers, including comfortable travel and fuel consumption. The method was verified through simulations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.383-388
• /
• 1995

The ARC light has been measured using photo-detect system under different TIG welding condition. Light detect system consists of photo diode, ND Filter, OP Amp. A/D convertor and PC. The purpose of this experiment is to show the relationship between ARC light and process variables such as welding current, torch travel speed, etc. The results can be applied to estimate the condition of welding process and the quality of welding products. The signal of ARC light has periodic patterns in good TIG welding condition whereas in abnormal condition the signal has different pattern. Amount of Ar shielding gas and distance from electrode to specimen affect the signal pattern significantly.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.535-536
• /
• 2006

Researches about micro technology travel lively in these days. Such many researches are concentrated in the field of materials and a process field. But properties of micro materials should be known to give results of research developed into still more. In these various material properties, reliability data such as mechanical, optical, thermal property, etc is the basic property. In this paper, it is measured that is material properties of main BLU(Back Light Unit) components in LCD(Liquid Crystal Display). The pattern shape of prism sheet, diffuser film and reflective plate are measured by variable 3D scanning equipments. It is researched which is the method to measure an optimal 3D pattern shape in each components.