• Transactions on Electrical and Electronic Materials
• /
• 제5권1호
• /
• pp.24-28
• /
• 2004

We have used ITO/Alq$_3$/Al structure to study electrical conduction mechanism in organic light-emitting diodes. Current-voltage-luminance characteristics were measured at room temperature by varying the thickness of Alq$_3$ layer from 60 to 400mm. We were able to confirm that there are three different mechanisms depending on the applied voltage region; ohmic, space-charge-limited current, and trap-charge-limit-current mechanism. And the maximum luminous efficiency was obtained when the thickness of Alq$_3$ layer is 200nm.

• 한국환경과학회지
• /
• 제26권1호
• /
• pp.47-54
• /
• 2017

We analyzed the variation in occurrence time and intensity of attacks by the rice stem borer (Chilo suppressalis Walker) on several crops. This study aimed to understand how C. suppressalis damages crops and to utilize this basic data for the establishment of environment-friendly control methods like pheromone traps. This study surveyed the changes in occurrence patterns of C. suppressalis, biological characteristics of overwintering larvae, and the efficacy of different types of pheromone traps the years. We found similar occurrence patterns of C. suppressalis in different crops. In addition, occurrence time of the first generation was advanced. Overwintering larvae showed no difference in pupal period and weight compared to the non-overwintering ones. However, the larval period was reduced to 19.1 days in Miscanthus field, in contrast to that in the paddy fields. It was confirmed that larvae of C. suppressalis generally prefer the lower part of the stems of Miscanthus. Efficiency of the emergence trap was confirmed to be greater than that of the delta trap for capturing C. suppressalis adults. However, it is necessary to adjust the control period because of the advancement in occurring time of C. suppressalis in recent years. The larvae of C. suppressalis experience favorable environmental conditions for overwintering in Miscanthus fields. The major Miscanthus fields are generally located in the areas protected for sources of drinking water, owing to which spraying of chemical pesticides is very limited. The results of this study provide important inputs for the development of environment-friendly control methods.

• 한국진공학회지
• /
• 제22권1호
• /
• pp.37-44
• /
• 2013

본 연구에서는 양자점(quantum dot, QD)에서의 전하트랩이 태양전지의 특성에 미치는 영향을 조사하기 위하여, GaAs 모체 태양전지(MSC)의 활성층에 InAs/GaAs QD을 삽입한 $p^+-QD-n/n^+$ 태양전지(QSC)를 제작하여 그 특성을 비교 조사하였다. Stranski-Krastanow (SK)와 준단층(quasi-monolayer, QML)의 2종류 QD를 도입하였으며, 표준 태양광(AM1.5)에서 얻은 전류-전압 곡선으로부터 태양전지의 특성인자(개방전압($V_{OC}$), 단락전류($I_{SC}$), 충만도(FF), 변환효율(CE))를 결정하였다. SK-QSC의 FF값은 80.0%로 MSC의 값(80.3%)과 비슷한 반면, $V_{OC}$와 $J_{SC}$는 각각 0.03 V와 $2.6mA/cm^2$만큼 감소하였다. $V_{OC}$ 및 $J_{SC}$ 감소 결과로 CE는 2.6% 저하되었는데, QD에 의한 전하트랩이 주요 원인으로 지적되었다. 전하트랩을 완화시키기 위한 구조로서 QML-QD 기반 태양전지를 본 연구에서 처음 시도하였으나, 예측과는 달리 부정적 결과를 보였다.

• 환경생물
• /
• 제35권4호
• /
• pp.640-647
• /
• 2017

생물다양성 측면에서 논 생태계의 중요성이 대두되면서 수서생물을 효율적으로 채집하는 방법이 요구되고 있다. 본 연구는 논 생태계 내에서 수서생물을 객관적이고 정량적으로 쉽게 채집하기 위해 두 가지 유인제(어분, 캐미라이트)를 활용한 수중트랩을 고안하였다. 고안된 트랩으로 채집된 수서생물의 유인제 선호도는 일반화선형혼합모형을 통해 분석되었다. 또한 선행연구의 데이터를 활용하여 방형구와 수중트랩으로 채집된 수서 무척추동물의 군집 조성을 비계량형다차원척도법을 통해 비교 분석하였다. 그 결과, 수중트랩에 의해 채집된 65분류군의 수서생물 중 18분류군이 유인제에 의해 채집효율이 달라지는 것을 확인하였다. 18분류군 중왕우렁이, 수정또아리물달팽이, 애기물달팽이, 돌거머리, 패충류, 풍년새우, 꼬마줄물방개, 애기물방개, 깔따구류, 참개구리, 미꾸리류 등 12분류군은 어분을 선호하였고, 아시아실잠자리, 실잠자리류, 깃동잠자리, 방물벌레, 검정배물벌레, 애물땡땡이 등 6종은 캐미라이트를 선호하였다. 또한 수중트랩은 방형구법에 비해 생물다양성의 측정도구로서의 활용도는 낮지만 특정 분류군의 선택적인 채집에는 효과적이었다. 본 연구에서 간단하고 정량적인 방법으로 수서생물을 채집할 수 있도록 고안된 트랩은 장기적이고 광범위한 논 수서생물 생태 조사에 유용하게 활용될 수 있을 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.163.1-163.1
• /
• 2016

Lead halide perovskites CH3NH3PbX3 (X=Cl, Br, I) have received great interest in the past few years because of their excellent photoelectronic properties as well as their low-cost solution process. Their theoretical efficiency limit of the solar cell devices was predicted around 31% by a detailed balance model for the reason that exceptional light-harvesting and superior carrier transport properties. Additionally, these excellent properties contribute to the applications of optoelectronic devices such as LASERs, LEDs, and photodetectors. Since these devices are mainly using perovskite thin film, one of the most important factor to decide the efficiency of these applications is the quality of the film. Even though, optoelectrical devices are composed of polycrystalline thin film in general, not a single crystalline form which has longer carrier diffusion length and lower trap density. For these reasons, monodomain perovskite thin films have potential to elicit an optimized device efficiency. In this study, we analyzed the crystallography of the in-plane aligned perovskite thin film by X-ray diffraction (XRD) and selected area electron diffraction (SAED). Also the basic optic properties of perovskites were checked using scanning electron microscopy (SEM) and UV-Vis spectrum. From this work, the perovskite which is aligned in all directions both of out-of-plane and in-plane was fabricated and analyzed.

• 융복합기술연구소 논문집
• /
• 제7권1호
• /
• pp.15-18
• /
• 2017

As emission gas regulation of deisel vehicles is strengthened to Euro-6, It becomes difficult to deal with NOx regulated value mainly by EGR without additional after-treatment system. In addition, RDE(Real Driving Emissions) test will be introduced after september 2017. Therefore, It is essential to develop the after-treatment of diesel vehicles which reduce NOx emissions. It is possible to use DOC, DPF, LNT or DOC, DPF and SCR as a after-treatment system for reducing NOx. However, It is expected that the SCR will be applied widely because LNT alone does not have sufficient NOx purification efficiency. In this study, It tried to analyze the efficiency of reducing NOx emissions during the mode test by attaching a NOx sensor to test vehicle. As a result, It was confirmed that NOx emissions was significantly reduce through the after-treatment system from engine. And the NOx reduction efficiency of SCR was about 4.5 times better than DOC, DPF.

• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.142-148
• /
• 2009

The direct injection(DI) diesel engine has become a prime candidate for future transportation needs because of its high thermal efficiency. However, nitrogen oxides(NOx) increase in the local high temperature regions and particulate matter (PM) increases in the diffusion flame region within diesel combustion. Therefore, the demand for developing a suitable after treatment device has been increased. NOx absorbing catalysts are based on the concept of NOx storage and release making it possible to reduce NOx emission in net oxidizing gas conditions. This De-NOx system, called the LNT(Lean NOx Trap) catalyst, absorbs NOx in lean exhaust gas conditions and release it in rich conditions. This technology can give high NOx conversion efficiency, but the right amount of reducing agent should be supplied into the catalytic converter at the right time. In this research, a performance characteristics of LNT with a hydrogen enriched gas as a reductant was examined and strategies of controlling the injection and rich exhaust gas condition were studied. The NOx reduction efficiency is closely connected to the injection timing and duration of reductant. LNT can reduce NOx efficiently with only 1 % fuel penalty.

• 한국수소및신에너지학회논문집
• /
• 제27권2호
• /
• pp.155-162
• /
• 2016

A proton exchange membrane fuel cell (PEMFC) produces only water at cathode by an electrochemical reaction between hydrogen and oxygen. The generated water is transported across the membrane from the cathode to the anode. The transported water collected in water-trap and drained to the cathode within the humidifier outlet. If the condensate water is not being drained at the appropriate time, condensate water in the anode can cause the performance degradation or fuel efficiency degradation of fuel cell by the anode flooding or unnecessary hydrogen discharge. In this study, we proposed an optimization method of condensate water drain logic for the water drain performance and the water drain algorithm as considered the condensate water generating speed prep emergency case. In conclusion, we developed the water management strategy of fuel processing system (FPS) as securing fuel efficiency and operating stability.

• 한국수소및신에너지학회논문집
• /
• 제17권4호
• /
• pp.409-417
• /
• 2006

The characteristics of hydrogen-oxygen mixture gas generation stack was experimentally studied in terms of efficiency. For this purpose, the mixture gas generation stack was fabricated by connecting 7 cells in series following the Tero Ranta report. In order to avoid the instrument inaccuracy, all measuring equipments were re-tested and calibrated by Korea Laboratory Accreditation Scheme (KOLAS) certified laboratories. Since the amount of produced gas is most crucial in determining the efficiency, two gas collecting methods such as bottle trap method and wet gas meter method were adopted. From the experimental results, it was found that both KOH fume and steam evaporated along with hydrogen-oxygen mixture gas, and these by-product gases could cause the misestimation of the stack efficiency. The current, voltage, and energy efficiencies of the hydrogen-oxygen mixture gas generation stack was evaluated based upon the stack efficiency calculation method summarized in this work.

• Journal of Microbiology and Biotechnology
• /
• 제12권4호
• /
• pp.583-591
• /
• 2002

Biodegradation of fat, oil, and grease (FOGs) plays an Important role in wastewater management and water pollution control. However, many industrial food-processing and food restaurants generate FOG-containing waste waters for which there Is no acceptable technology for their pretreatment. To solve these problems, this study evaluated the feasibility of effective FOG-degrading microorganisms on the biodegradation of olive oil and FOG-containing wastewater. Twenty-two strains capable of degrading FOGs were isolated from five FOG-contaminated sites for the evaluation of their FOG degradation capabilities. Among twenty-two strains tested, the lipase-producing Pseudomonas sp. strain D2D3 was selected for actual FOG wastewater treatment. Its biodegradability was performed at 3$0^{\circ}C$ and pH 8. The extent of FOG removal efficiency was varied for each FOG tested, being the highest for olive oil and animal fat (94.5% and 94.4%), and the lowest for safflower oil (62%). The addition of organic nitrogen sources such as yeast extract, soytone, and peptone enhanced the removal efficiency of FOGs, but the addition of the inorganic nitrogen nutrients such as $NH_4$Cl and $(NH_4)_2SO_4$ did not increase. The $KH_2PO_4$ sources in 0.25% to 0.5% concentrations showed more than 90% degradability. As a result, the main pathway for the oxidation of fatty acids results in the removal of two carbon atoms as acetyl-CoA with each reaction sequence: $\beta$-oxidation. Its lipase activity showed 38.5 U/g DCW using the optimal media after 9 h. Real wastewater and FOGs were used for determining the removal efficiency by using Pseudomonas sp. strain D2D3 bioadditive. The degradation by Pseudomonas sp. strain D2D3 was 41% higher than that of the naturally occurring bacteria. This result indicated that the use of isolated Pseudomonas sp. strain D2D3 in a bioaugmentating grease trap or other processes might possibly be sufficient to acclimate biological processes for degrading FOGs.