• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.358-363
• /
• 2008

The spray cross-section characteristics of two-phase spray that using external-mixing nozzle injected into a subsonic cross flow were experimentally studied with various ALR ratio that is $0{\sim}59.4%$. Suction type wind tunnel was used and experiments were conducted to ambient environment. Several plain orifice nozzles with L/d of 30 and orifice diameter of 0.5 mm and orifice length 1.5 mm were tested. Free stream velocity profiles at the injection location were measured using hot wire. Spray images were captured to study collision point and column trajectory. Phase Doppler particle analyzer(PDPA) was utilized to quantitatively measuring droplet SMD, volume flux. Measuring probe of PDPA positions was moved 3-way transverse machine. SMD distributions were layered structure and peaked at the top of the spray plume and low value at bottom of the spray. Volume flux of spray was distributed to the two side region and volume flux quantity decreased when ALR ratio increased. It was found that the perpendicularly injected two-phase spray jet of external mixing into a cross flow showing that mistlike spray moved away from the test section bottom region.

• 한국물환경학회지
• /
• 제29권3호
• /
• pp.383-392
• /
• 2013

In this research, mixing behavior of the floating pollutant such as oil spill accidents was analyzed by studying the advection-diffusion of GPS floaters at water surface. The LPT (Lagrangian Particle Tracking) model of EFDC (Environmental Fluid Dynamics Computer Code) was used to simulate the motion of the GPS floater tracer. In the field experiment, 35 GPS floaters were injected at the Samun Bridge of Nakdong River. GPS floaters traveled to downstream about 700 m for 90 minutes. The field data by the GPS floater experiments were compared with the simulation in order to calibrate the parameter of LPT model. The turbulent diffusion coefficient of LPT model was determined as $K_H/hu^*$ = 0.17 from the scatter diagram. The arrival time of peak concentration and transverse diffusion from the simulation results were similar with the experiments from the concentration curves. Numerical experiments for anticipation of damage from floating pollutant were conducted in the same reach of the Nakdong River and the results show that the pollutant cloud transported to the left bank where the Hwawon pumping station is located. For this reason, it is suggested that the proper action should be needed to maintain the safety of the water withdrawal at the Hwawon pumping station.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2002년도 제18회 학술발표대회 논문초록집
• /
• pp.61-61
• /
• 2002

스크램 제트 엔진의 설계에서 초음속으로 유입된 공기의 짧은 잔류시간으로 인한 연료-공기의 혼합은 가장 중요하며 해결하기 힘든 문제이다. 전헝적인 비행 조건에서 흡입 공기가 극초음속 비행기 엔진 내에서 잔류하는 시간의 단위는 1 ms 정도이어서 짧은 시간 동안 연료와 공기는 효율적으로 혼합되어야 하며, 최대의 추진력을 얻기 위하여 과도한 공력저항없이 연소 가능한 연료-공기 혼합기를 생성시킬 수 있는 효율적인 연료-공기의 혼합 방법이 요구된다. 현재까지 가장 많이 연구되어 온 혼합 방법은 엔진 입구로 들어오는 공기 유동에 수직 방향으로 연료를 분사하는 것으로 이 방법은 연료 유동 방향과 공기 유동 방향이 수직이기 때문에 추력 손실이 생기는 단점을 갖고 있지만, 초음속으로 유입되는 공기에 수직으로 연료를 분사하게되면 분사 위치 앞에 궁형 충격파가 생겨서 감속되어 유동이 회전하는 재순환영역이 생기고 연료의 혼합이 잘 이루어지는 장점이 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.67-72
• /
• 2003

Numerical calculation has been performed to investigate the effect of inlet configuration on the growth rate of GaN layer on the heated susceptor. The conventional single inlet, where the gas is mixed by force in the inlet, is compared with separated flow inlet. Two-parallel gas flow $H_{2}$ and $NH_{3}$ are separated by a plate with finite length which are also parallel to the susceptor. The effect of separated plate length, carrier gas and flow rate of each precursor on the mixing of reactant gases and growth rate were investigated. Furthermore the three dimensional model is employed to predict the transverse variation of growth rate.

• 대한기계학회논문집B
• /
• 제26권3호
• /
• pp.375-383
• /
• 2002

The flowfield of transverse jet in a supersonic air stream subjected to shock wave turbulent boundary layer interactions is simulated numerically by Generalized Taylor Galerkin(GTG) finite element methods. Effects of turbulence are taken into account with a two-equation (k-$\varepsilon$) model with a compressibility correction. Injection pressures and slot widths are varied in the present study. Pressure, separation extents, and penetration heights are compared with experimental data. Favorable comparisons with experimental measurements are demonstrated.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.409-413
• /
• 2004

자연하천에서의 횡혼합 특성을 분석하고 횡분산계수를 산정하기 위해서 추적자 실험을 실시하였다. 추적자 실험은 섬강에서 세번, 홍천강에서 두번, 청미천에서 한번, 총 여섯 군데에서 실행되었다. 각각의 실험에서 속도, 수심, 유속과 같은 수리량이 측정되었다. 추적자로서는 미량으로도 관측이 용이하며 병원에서 진찰용으로 사용할 만큼 인체에 해롭지 않은 방사성 동위원소 (I-131)를 사용하였다. 추적자 실험을 통해 얻어진 농도데이터와 수리량 데이터를 이용하여 횡분산계수를 산정하였으며 이때 모멘트 방법과 수정모멘트 방법 그리고 유관모형 추적법이 사용되었다. 세가지 방법을 이용하여 산정된 횡분산계수를 토대로 각각의 방법이 자연하천에서의 횡분산계수를 산정하는데 합당할지를 비교 분석하였다. 또한 여섯 경우의 지형이 다른 자연하천에서 구한 횡분산계수를 토대로 하천의 형상에 의해 하천에서의 횡분산 거동이 어떻게 달라지는가를 분석하였다.

• 한국추진공학회지
• /
• 제25권2호
• /
• pp.42-54
• /
• 2021

Aft-deck은 가스터빈 배기 플룸을 차폐하거나, 제트를 확산하여 외부 공기와 혼합율을 증가시켜 배기가스의 온도를 저감하기 위한 용도로 최신 무인항공기에 적용되고 있다. 본 연구에서는 Aft-deck의 설계 변수에 따라 노즐의 성능이 어떻게 영향을 받는지 알아보고자 하였다. Aft-deck의 설계 변수로는 길이, 확산각, 상부 덱 형상으로 선정하였으며, 길이 변수에 따른 추력과 차폐율 간의 상관관계를 제시하였다. 그리고 확산 각도의 범위에 따라 노즐 추력과 제트 확산에 대한 상관관계를 제시하였다. 또한, 상부 덱 제거를 통해 추력 향상 효과를 확인하였으며, 횡 방향 속도 벡터의 특성이 외부 유동과의 혼합 성능을 결정하는 것을 알게 되었다.

• 한국결정성장학회지
• /
• 제6권1호
• /
• pp.19-31
• /
• 1996

갈륨 비소 반도체 결정을 성장시키는 데 많이 사용되는 수평브렷지만법에 의하여 성장된 갈륨비소 단결정 내에셔 불순물 분포를 알아보기 위하여 액상에서 열전달, 물질전달, 유 체흐름과 고상에서 열전달을 묘사하는 과도기 모탤을 수립하였고 유한요소법과 음함수 척분법 에 의하여 수치모사를 행하였다. 그 결과 Gr이 작은 경우에는 확산조절성장의 특성을 보였으며 G Gr이 1,700 정도만 되어도 농도의 최소값이 계면 근처로 이동하였다. 응고가 진행됨에 따라 계 면의 곡률이 증가하였고, 흐름에 의한 혼합이 안정될 때까지 수직편석이 증가하였다. 수펑편석 은 응고가 진행됨에 따라 증가하였지만 흐름의 강도가 강한 경우에는 곧 일정하게 유지되였다. G Gr이 아주 작거나 큰 경우에는 Smith식과 Scheil식의 경우와 잘 일치하였다.

• Structural Engineering and Mechanics
• /
• 제90권4호
• /
• pp.357-370
• /
• 2024

Due to the fact that the mechanism of the effects of temperature and initial geometric imperfection on low-velocity impact problem of axially moving plates is not yet clear, the present paper is to fill the gap. In the present paper, the nonlinear dynamic behavior of axially moving imperfect graphene platelet reinforced metal foams (GPLRMF) plates subjected to lowvelocity impact in thermal environment is analyzed. The equivalent physical parameters of GPLRMF plates are estimated based on the Halpin-Tsai equation and the mixing rule. Combining Kirchhoff plate theory and the modified nonlinear Hertz contact theory, the nonlinear governing equations of GPLRMF plates are derived. Under the condition of simply supported boundary, the nonlinear control equation is discretized with the help of Gallekin method. The correctness of the proposed model is verified by comparison with the existing results. Finally, the time history curves of contact force and transverse center displacement are obtained by using the fourth order Runge-Kutta method. Through detailed parameter research, the effects of graphene platelet (GPL) distribution mode, foam distribution mode, GPL weight fraction, foam coefficient, axial moving speed, prestressing force, temperature changes, damping coefficient, initial geometric defect, radius and initial velocity of the impactor on the nonlinear impact problem are explored. The results indicate that temperature changes and initial geometric imperfections have significant impacts.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.799-802
• /
• 2008

General behaviors based on hydraulic characteristics of natural streams and channels have been recently analyzed and developed via various numerical models. However in the states of natural hydraulics, an experimental research must be performed simultaneously with the mathematical analysis due to effects of hydraulic properties such as meander, sediment, and so on. In this study based on 2-D advection-dispersion equation, flow and tracer experiments were performed in the S-curved meandering laboratory channel with a rectangular cross-section. The channel was equipped with instrument carriages which was equipped with an auto-traversing system to be used with velocity measuring sensors throughout the depth and breadth of the flow field. To measure concentration distribution of the salt solution was adjusted to that of the flume water by adding methanol and a red dye (KMnO4) was added to aid the visualization of the tracer cloud, the tracer was instantaneously injected into the flow as a full-depth vertical line source by the instantaneous injector and the initial concentration of the tracer was 100,000 mg/l. The secondary current as well as the primary flow pattern was analyzed to investigate the flow distribution in the meandering channels. The velocity distribution of the primary flow for all cases skewed toward the inner bank at the first bend, and was almost symmetric at the crossovers, and then shifted toward the inner bank again at the next alternating bend. Thus, one can clearly notice that the maximum velocity occurs taking the shortest course along the channel, irrespective of the flow conditions. The result of the tracer tests shows that pollutant clouds are spreading following the maximum velocity lines in each cases with various mixing patterns like superposition, separation, and stagnation of pollutant clouds. Flow characteristics in each cases performed in this study can be compared with tracer dispersion characteristics with using evaluation of longitudinal and transverse dispersion coefficients(LDC, TDC). As expected, LDC and TDC in meandering parts have been evaluated with increasing distribution and straight parts have effected to evaluate minimum of LDC and TDC due to symmetric flow patterns and attenuations of secondary flow.