• 한국전기전자재료학회논문지
• /
• 제27권4호
• /
• pp.209-216
• /
• 2014

The screen printed technique is one of the electrode forming technologies for crystalline silicon solar cell. It has the advantage that can raise the production efficiency due to simple process. The electrode technology is the core process because the electrode feature is given a substantial factor (for solar cell efficiency). In this paper, we tried to change conditions such as squeegee angle $55{\sim}75^{\circ}$, snap off 0.5~1.75 mm, printing pressure 0.6~0.3 MPa and 1.6~2.0 mm finger spacing. As a result, the screen printing process showed an improved performance with an increased height higher finger height. Optimization of fabrication process has achieved 17.48% efficiency at screen mesh of 1.6 mm finger spacing.

• 한국압력기기공학회 논문집
• /
• 제16권2호
• /
• pp.25-34
• /
• 2020

As leakage in nuclear power plants could cause a variety of problems, it is very critical to monitor leakage from the safety point of view. Accordingly, a new type of leak detection system is currently being developed and flow characteristics of the sampling and transportation system are investigated by using numerical analysis as a part of the development process in this study. The results showed that the steam mass fraction varied according to the effect of the gap between the insulation and piping component, transportation velocity, and material properties of porous media during the sampling and transportation process. The results of this study should be useful for understanding flow characteristics of the sampling and transportation system and its design and application.

• 한국건축시공학회지
• /
• 제12권6호
• /
• pp.648-663
• /
• 2012

With recent attempts to improve quality and productivity, the prefabrication manufacturing system has been occupying an increasing share of the construction area. To minimize site work, material is more frequently being produced and partially assembled at a plant, and then installed at a site. For this reason, the production process is being divided and the materials are being delivered to the site after passing through multiple plants. With these changes in the production process, the materials delivery plan is becoming an important management point. In particular, as road transportation using trucks has a 71 percent share of the domestic transportation market, selecting the proper transportation path is important when delivering materials and equipment to a site. But the management system at the project design phase to calculate the delivery cost by considering the production process of the pre-fab material and the $CO_2$ emission at the material delivery phase is currently lacking. This study suggests a process design model for assembly production of the pre-fab material and transportation logistics based on carbon emission. The suggested model can be helpful to optimize the location of the intermediate plant. It is expected to be utilized as a basic model at the project plan and design phase when subcontractors make decisions on items such as materials procurement, selecting the production method, and choosing the location of the assembly plant.

• 융복합기술연구소 논문집
• /
• 제2권2호
• /
• pp.30-34
• /
• 2012

The SI thermochemical cycle process accomplishes water splitting through distinctive three chemical reactions. We focused on thermodynamic models applicable to the process. Recently, remarkable models based on the assumed ionic species have been developed to describe highly nonideal behavior on the liquid phase reactions. ElecNRTL models with ionic reactions were proposed in order to provide reliable process simulation results for phase equilibrium calculations in Section II and III. In this study, the current thermodynamic models of SI thermochemical cycle process were briefly described and the calculation results of the applied ElecNRTL models for phase equilibrium calculations were illustrated for binary systems.

• 대한교통학회지
• /
• 제7권1호
• /
• pp.43-55
• /
• 1989

This study is to review the road traffics and its process by the type of business in annual Statistical Yearbook of Transportation published under the supervision of Ministry of Transport, and the main purpose of this study is to find out an recommendations for the result of the review. For this purpose, this study surveyed and analyzed actual results and its output process in Statistical Yearbook by vehicle and business types. The local survey is performed for the nationwide 23 cities to produce passenger (ton) number and passenger (ton)-㎞ number by vehicle and business types. The result of the local survey is compared with the road traffics in Statistical Yearbook of Transpotation. The result of the survey analysis reveals that road traffic in Statistical Yearbook is produced formally and there is remarkable differences between road traffic in Statistical Yearbook and local survey output. Conclusively, statistical output process of road traffics must be improved to solve th se problems mentioned above in respect to system and technic. Also it is recommended to publish its own road traffic statistics (tentatively named Statistical Yearbook of Road Transportation) just like Statistical Yearbook of Railroad for user's expediency and practicality.

• 한국안전학회지
• /
• 제24권6호
• /
• pp.79-85
• /
• 2009

This study presents an algorithm to select the best alternative plane among various bridge superstructure types(Steel box girder, Rational girder, PSC-I girder) using Value Engineering(VE). Economical efficiency, landscape, constructability, maintenance, stability, function of bridge superstructure were taken into consideration in the designing of bridge. Economical efficiency was evaluated for each alternative plan with optimal design considering Life Cycle Cost(LCC). Repair and rehabilitation histories and some factors were set to get reasonable results. In the application of Analytic Hierarchy Process(AHP), consistency of Pairwise Comparisons Matrix was evaluated and the best plan was determined.

• 한국융합학회논문지
• /
• 제11권5호
• /
• pp.27-34
• /
• 2020

오늘날 모바일 교통카드의 활용은 갈수록 증가하고 있다. 모바일 교통카드 충전 방법 중 대부분이 신용카드 충전 방법을 이용한다. 기존의 신용카드 충전 시스템은 카드사마다 프로세스가 다르며 매입 과정에서 시스템적인 오류가 발생했을 때, 이를 자동으로 처리하는 기능이 없어 사람이 수동적으로 오류를 해결해야 하는 문제점이 있다. 본 논문에서는 이러한 부분을 개선하고자, 공통 프로세스를 정의하고 메타데이터로 정의한 테이블을 생성하여 매입 내용들을 정제하여 정보를 제공하는 시스템을 제안한다. 제안 시스템을 통하여 충전 과정에서 오류가 발생하였을 때 개발 공수를 줄이고 충전 시스템의 프로세스 개발 연구에 도움이 될 것으로 기대한다.

• 산업공학
• /
• 제23권4호
• /
• pp.286-299
• /
• 2010

Recently, as concerns about environmental improvement have increased, various environmentally friendly transportation services have been developed and introduced. However, the effect on the introduction of such services has been not analyzed through a systematic methodology and process. Therefore, this research aims at suggesting a framework to analyze the effect of an environmentally friendly transportation service and investigating the validity of the framework. To the ends, a process to analyze the degree of improvement in transportation systems and environments, the linkage with existing policies, and profitability of the service is proposed. In addition, the concept and value of carsharing service, a representative environmentally friendly transportation service are explained and then the effects of the service are examined in terms of the aforementioned analytic areas, respectively. The results of this research can be utilized to provide the validity of a newly developed environmentally friendly transportation service and reflected to the policies of transportation and environment.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4125-4133
• /
• 2023

The transportation of spent nuclear fuel is an important process that involves road and sea transport from an interim storage facility to storage and final disposal sites. As spent nuclear fuel poses a significant risk, carefully evaluating its vibration and shock characteristics under normal transport conditions is essential. In this regard, full-scale multi-modal transport tests (MMTT) have been conducted domestically and internationally. In this paper, we discuss the process of developing a multi-body dynamics (MBD) model to analytically simulate conditions that cannot be considered in tests. The MBD model is based on the KORAD-21 transportation system was validated using the Korean MMTT results from 2020 to 2021. This paper summarizes the details of the development and verification of the MBD model for the KORAD-21 transportation system under normal transport test conditions. This approach can be applicable to various transportation scenarios and systems, and the results of this study will help to ensure that nuclear fuel transportation is conducted safely and effectively.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.94-99
• /
• 2002

The traffic policy of a city in Korea has brought to many traffic problems by putting emphasis on the only side of mobility in the past that the personal transportation was put first in importance more than the public transportation. As the result of this policy, in the process that the traffic policy of large cities in Korea changes into accessibility, it is shown for re-lighting up the development of the public transportation to be going to be able to get many suggestions in searching for the desirable developing direction of the new means of transportation that will arrive at Korea in the future. Especially, compared with the policy of U.S.A. on the traffic plan that has concentrated on the road and the vehicle, and that of Europe that has put first in the walking and the public transportation system, it is considered as an important thing that the lesson is given to us about what is important for the desirable city development. Transportation can be divided into four; a railroad transportation. a road transportation, a marine transportation, and an aerial transportation.