• Proceedings of the KOR-KST Conference
• /
• 2000.02a
• /
• pp.3-22
• /
• 2000

이용자의 경로선택 형태를 모사하는 통행배정모형 결과의 정확도는 교통계획에 상당한 영향을 미친다. 이용자의 경로선택 결정과정에서 가장 중요한 판단기준은 통행시간과 통행요금이다. 그런데 통행요금은 이용자의 경로거리에 따라 다양한 방식으로 부과되므로, 링크를 분석단위로 하는 기존의 통행배정모형은 현실적인 통행요금 반영이 힘들었고 또한 수요예측 결과를 이용한 다양한 분석에서 제약을 받아 왔다. 본 연구는 이러한 배경에서 경로교통량을 도출할 수 있는 경로기반 통행배정모형을 구축하였고, 또한 경로거리에 따라 결정되는 현실적인 통행요금을 반영할 수 있는 알고리즘을 개발하였다. 경로기반 배정모형에서는 GP(Gradient Projection) 알고리즘을 이용하였고, 계산상의 효율성 제고를 위해 K-최단경로 알고리즘 중 MPS(Minimal Path Search) 알고리즘을 이용하였다. 개발된 배정 모형은 현실적인 통행요금을 반영할 수 있으므로 통행배정 결과의 정밀도를 향상시켰을 뿐만 아니라 기존 배정모형에 비해 최적해로의 수렴속도도 개선되는 것으로 나타났다. 본 논문의 배정모형은 경로교통량이 도출되고 통행요금을 반영할 수 있으므로, 통행요금과 통행 거리 관계에 따른 목적함수의 규명과 그에 따른 효과척도를 계량화할 수 있다. 따라서 본 모형은 통행배정에서 실재상황을 보다 현실여건에 맞도록 규명할 수 있고, 기존의 제한적인 효과분석의 문제점을 해결할 수 있으므로 그 활용범위가 넓다. 또한 본 논문은 개발된 배정모형의 적용사례로서 고속도로 수요관리 요금체계 개선방안을 제시하였다. 기존의 고속도로 통행요금 산정 방법은 이론적 근거가 미약했던 반면, 본 논문에서 개발된 배정모형과 고속도로 수요관리 요금체계 개선방안은 고속도로 통행료 결정에 대한 과학적이고 합리적인 분석방법을 제공하였다.한 민감도 분석을 실시한 결과 대안1의 경우 교통량의 변화 및 화물통행의 시간가치의 증가시 사회적 편익이 오히려 감소하였고, 대안2와 3의 경우 사회적 편익이 증가하는 것을 알 수 있었다. 이는 경부고속도로의 화물차량의 구성비에 따라 대안 1의 경우 오히려 화물차의 통행시간이 증가함에 그 원인이 있다 할 것이다. 이상과 같은 결론을 통하여 경부고속도로상의 화물전용차선의 설치시는 수답렬 교통량의 구성비와 구간 평균교통량에 의하여 그 효과가 다르게 나타남을 알 수 있었다. 따라서 물류비용 절감차원에서의 화물전용차선의 설치는 본 연구에서 나타낸 방법과 같이 수단간의 경제적 편익을 고려한 구간별 시간대별 효과분석을 통하여 정책의 시행여부가 결정되어야 할 것이다. 한편, 화물전용차선의 설치로 인한 물류비용의 절감을 보다 효과적으로 달성하기 위해서는 종합류류 전산망의 시급한 구축과 함께 화물차의 적재율을 높이고 공차율을 낮출 수 있는 운송체계의 수립이 필요한 것으로 판단된다. 그라나 이러한 화물전용차선의 효과는 단기적인 치유책일 수밖에 없기 때문에 물류유통 시설의 확충을 위한 사회간접자본의 구축을 서둘러 시행하여야 할 것이다.으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과 정압주입시험에서도 확인된다.. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of co

• Journal of agriculture & life science
• /
• v.44 no.6
• /
• pp.171-182
• /
• 2010

Water demand and resource at a watershed scale were investigated to prepare for long-term water planning of the Namgang sub-basin. The quantity of water resource was defined as average annual runoff by a simple Tank model with three serial tanks, and water demand for public, industrial, agricultural and the other uses was determined using the per-unit method employed in the Water Vision 2020, the Ministry of Construction and Transportation. The results showed that total amount of water resources in the Namgang sub-basin was estimated as about $935,414{\times}10^{3}m^3/yr$ for a 10-year period from 2000 to 2009 and the water withdrawals in public, industrial, agricultural and other sector were derived as $105,493{\times}10^{3}m^3/yr$, $32,686{\times}10^{3}m^3/yr$, $243,194{\times}10^{3}m^3/yr$, and $81,615{\times}10^{3}\;m^3m^3/yr$, respectively. In addition, the Namgaram Inno-city project could increase the overall water demand by $17,156{\times}10^{3}\;mm^3/yr$ due to the population influx.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.58-76
• /
• 2019

As the number of reported injuries has tended to increase over time, large hospitalization expenditure from excessive medical treatments and hospitalization, and insurance frauds associated with moral hazard in minor collisions have caused a global societal problem. Many occupants of rear-ended vehicles involved in rear-end collisions complain of whiplash injury, which is also known as neck injury, without any anatomical and radiological evidence. With only clinical symptoms, stating that a whiplash injury is a type of injury defined by the Abbreviated Injury Scale would be difficult. Therefore, this study focuses on minor rear-end collisions, where the rear-ender vehicle collides with the rear-ended vehicle at rest. The mathematics dynamic model is employed to simulate a total of 100 rear-end collision scenarios based on various weights and collision speeds and identify how the weights and speeds of both vehicles influence the risk of whiplash injury in occupants involved in minor rear-end collisions. The possibility of an injury is very high when the same-weight vehicles are involved in accidents at collision speeds of 15 km/h or higher. The possibilities are 36% and 84% with collision speeds of 15 km/h and 20 km/h, respectively, if weights are disregarded.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.394-403
• /
• 2019

This research focuses on the perception of security screeners using a full body scanner at airport which had been newly introduced to terminal 2 of Incheon Int'l airport. To accomplish the purpose of research, this paper used UTAUT (Unified Theory of Acceptance and Use of Technology) model. Through an empirical analysis, it was proven the factors consisting of technological acceptance and how those factors affect both organizational innovation at airport and job satisfaction of security screeners. According to an empirical analysis, it was found out all the factors of technological acceptance have a significant effect on both organizational innovation and job satisfaction. However, only the effort expectation was shown to have a significant negative effect on the two dependant variables contrary to the other variables (performance expectation, behavioral intention and self efficacy. It was also proven organizational innovation had a moderating effect between technological acceptance and job satisfaction. Such results suggested organizational innovation at airport security division is necessary to enhance job satisfaction using a newly introduced full body scanner.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.64-78
• /
• 2019

This paper explores key factors affecting taxi travel using global positioning system(GPS) data in Seoul, Korea, considering spatial dependence. We first analyzed the travel characteristics of taxis such as average travel time, average travel distance, and spatial distribution of taxi trips according to the time of the day and the day of the week. As a result, it is found that the most taxi trips were generated during the morning peak time (8 a.m. to 9 a.m.) and after the midnight (until 1 a.m.) on weekdays. The average travel distance and travel time for taxi trips were 5.9 km and 13 minutes, respectively. This implies that taxis are mainly used for short-distance travel and as an alternative to public transit after midnight in a large city. In addition, we identified that taxi trips were spatially correlated at the traffic analysis zone(TAZ) level through the Moran's I test. Thus, spatial regression models (spatial-lagged and spatial-error models) for taxi trips were developed, accounting for socio-demographics (such as the number of households, the number of elderly people, female ratio to the total population, and the number of vehicles), transportation services (such as the number of subway stations and bus stops), and land-use characteristics (such as population density, employment density, and residential areas) as explanatory variables. The model results indicate that these variables are significantly associated with taxi trips.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.619-625
• /
• 2019

It is difficult to design because of the plug-holing phenomenon in which the amount of smoke discharged from the vertical vent is smaller than the designed amount of smoke. In this study, the effect of cross-sectional area ratio of tunnel and natural ventilation and heat release rate of fire source on plug-holing phenomenon occurring in natural ventilation system was experimentally analyzed. In the experiment model reduced to 1/20 size, the aspect ratio of the tunnel and the vertical vent was fixed, and the influence on the plug-holing phenomenon was confirmed by varying the sectional area ratio of the tunnel and the vertical vent. Experimental results show that the plug-holing phenomenon is caused by the comparison of the smoke boundary layer temperature with the temperature in the vertical vents, and the flow and temperature distribution characteristics under the vertical vents are changed as the cross-sectional area ratio of the tunnel and vertical vents increases. The plug-holing phenomenon is affected by the cross-sectional area ratio between the tunnel and the vertical ventilation. The greater the cross-sectional area ratio, the greater the probability of plug-holing.

• Journal of Internet Computing and Services
• /
• v.20 no.2
• /
• pp.109-118
• /
• 2019

The purpose of this study is to deliver both market-practical and civil-centric political implication for sharing economy by investigating the nature of consumer-adoption for car-sharing service. With the global interest and market proliferation of the sharing economy, various service models for sharing idle resources have also been released in Korea. Particularly, in case of car sharing service, public - private partnership projects are spreading rapidly in various local governments including Seoul, along with the growing demand for alternative transportation system centering on the urban area. This study conducted an empirical study on the process of accepting the car sharing service by analyzing the data collected from users of the car sharing service "Sharing Car(Nanum Car)" of Seoul Metropolitan Government. A survey was conducted on 281 users in their twenties who are in the age of main use among the experienced users of the "Sharing Car(NaNum)" residing in Seoul. The result of analysis on the relationship between these users' perceived value and intention to use the vehicle sharing service would provide implications for establishing consumer(citizen)-centeric policies as well as market implications.

• Journal of Digital Convergence
• /
• v.17 no.4
• /
• pp.95-105
• /
• 2019

The failure of company management that does not overcome the recession of shipping economy has negative impact on front-end and back-end industries in relation to shipping industry overall. This study aims to derive a measure of government policy support for win-win of ship owners and shippers by performing a survey with experts in ship owners, shippers, and port-related institutions. This study employed a consistent fuzzy preference relation (CFPR) method to provide the priority of government policies. The study results showed that out of all 14 policies, the policy perceived most important was "expansion of participation in share of shipping company or ships of shipper (0.102)" followed by "strengthening of national shipper-centered service quality (0.101)", and "providing a long-term transportation contract model of container cargo (0.085)". To recover the Korean shipping industry via win-win of ship owners and shipper, the policy enforcement is important through correct government policy establishment and priority selection. In this regard, this study contributed to proposing policies and priority of the policies. For the future study, detailed analysis on comparison of perception difference among stakeholders in the shipping industry is needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.197-207
• /
• 2021

According to the analysis of Kolb's learning style, Korean university student pilots interpret and attach meaning to themselves. Moreover, as the school year progresses, they enter the flight-training course with a 100 % diverger style, which is a variety of thoughts and imaginative learning styles. As the school year progresses, some changes occur with accommodator (11.1%) and assimilator (15.9%) styles. On the other hand, most students remain as the diverger style (71.4%). In the case of U.S. student pilots, most in first-year are assimilator (35.5%) and converger (24.3%) styles, and the proportion of the converger style increases as the senior year is approached. In the first grade, most Chinese student pilots are assimilators (41.5%) and convergers (28.4%), but in the higher grade, the proportion of assimilators and convergers decrease, and the proportion of diverger styles increases dramatically. In the fourth grade, the accommodator was similar to the first grade, but the converger style continued to decrease (41.5% in the first grade and 27.0% in the fourth grade).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.53-59
• /
• 2021

The marine transport industry generally applies new technologies later than other transport industries, such as airways and railways. Vessels require efficient operation, and their performance and lifespan depend on the level of maintenance and management. Many studies have shown that corrective maintenance (CM) and time-based maintenance (TBM) have restrictions with respect to enabling efficient maintenance of workload and cost to improve operational efficiency. Predictive maintenance (PdM) is an advanced technology that allows monitoring the condition and performance of a target machine to predict its time of failure and helps maintain the key machinery in optimal working conditions at all times. This study presents the development of a marine predictive maintenance (MPdM; maritime predictive maintenance) method based on applying PdM to the marine environment. The MPdM scheme is designed by considering the special environment of the marine transport industry and the extreme marine conditions. Further, results of the study elaborates upon the concept of MPdM and its necessity to advancing marine transportation in the future.