• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.1
• /
• pp.49-54
• /
• 2010

3GPP(Third Generation Partnership Project) LTE system that is the next step forward in cellular 3G services address the issues related to power saving at LTE base station. This is because that most of the energy in a typical telecommunication network is consumed by the wireless network's base station site. Power saving at LTE base station fall in with low-carbon green technology. This thesis proposes a power saving MAC protocol for LTE base station which utilizes different graded DRX/DTX(Discontinuous. Reception/Transmission). Considering traffic type in UE, proposed MAC protocol controls adaptive DRX/DTX cycle. The proposed method is more improve power saving performance than another method which is unchanged DRX/DTX by conditions. In this thesis, I propose an power saving MAC protocol in an environment where LTE base station are communicated with UE and prove improvement in performance through simulations.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.53-61
• /
• 2018

Recently, technologies related to the Internet of Things have developed rapidly and research on mobile environment home network systems is actively in progress. The Internet Engineering Task Force (IETF) Working Group proposed the CoAP/6LoWPAN technology as a suitable protocol for internetworking IoT devices with the Internet in a limited environment and adopting it as a standard. However, the existing home network systems hardly include security protocols. IETF recommends DTLS(Datagram Transport Layer Security) on UDP as security protocol suitable for IoT environments. In this paper, smart home network system based on CoAP/6LoWPAN by using DTLS is implemented in mobile environments. The data transfer time is measured according to each procedure of the DTLS protocol and the need to improve DTLS protocol is suggested.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.4
• /
• pp.313-322
• /
• 2016

This paper presents a method to improve the performance of Scalable Multicast Protocol deployed in wired and wireless network by adding retransmission function on base stations. When using Scalable Multicast Protocol over wireless and wired networks, packet drops on the wireless link produce the initiation of retransmission request packets and the implosion of retransmission packets, which deteriorate the multicast session performance. The efficient reliable multicast mechanism in wireless networks utilizing the retransmission function on the base station is addressed in this paper. We explain the design of a retransmission function which improves the performance of Scalable Multicast Protocol sessions in wireless and wirednetwork. The main idea is to cache Scalable Multicast Protocol packets at the base station and perform local retransmissions across the wireless link. ARENA has been used to simulate and to get performance for reducing signaling overhead and processing delay through the comparison of the proposed function to the Scalable Multicast Protocol.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.839-844
• /
• 2011

IPTV contents are based on MPEG2-TS(Moving Picture Expert Group-2 Transport Stream). The Created content is delivered to each home's Set-Top box through the Internet service network, which will be visible on television through the decoding process. The using and spending of content expanding were quite limited in the other existing lines' devices. For this end, provided methods are to convert MPEG2-TS to other format and then transmit it. These methods are causing not only an overload to the system but also its increasing the hardware resource requirements. In this paper, the MPEG2-TS of IPTV's content using RTP(Real time Transport Protocol) provided by the applicable variety of devices and environmental system, was designed and implemented. Through this paper, the existing MPEG2-TS is providing other devices for distribution and consumption that can give better content to the consumers which means that the QoS(Quality of Service) was enhanced. And, the increased consumption and use of content will help the IPTV business to get more development and activation.

• Journal of Broadcast Engineering
• /
• v.22 no.6
• /
• pp.744-754
• /
• 2017

This paper compares transport overhead of MPEG-2 TS, MMT and ROUTE in order to compare transport efficiency between the DTV and UHDTV. The MPEG-2 TS standard, widely used, was established for multiplexing and synchronizing encoded audio and video, additional information. In recent years, MMT and ROUTE was established as a next generation multimedia transport standard for the new broadcasting communication environment. In this paper, we compare and analyze transport overhead about three protocol. In order to analysis, we captured the UHD A/V stream in real-time broadcasting service using ROUTE and MMT, and we calculated and analyzed transport overhead using the overhead analysis program which was developed in our laboratory. Furthermore, for comparison under the same conditions, we assumed the MPEG-2 TS stream by extracting ES of UHD A/V stream based on the DTV standard. In this paper, we show the results of protocol transport efficiency in case of basic A/V stream except for additional services. And result show that MMT and ROUTE have similar overhead and MPEG-2 TS is relatively small overhead. However, since MPEG-2 TS result does not consider null packets, it is expected that the relative overhead difference will be reduced.

• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.47-54
• /
• 2008

In order to realize Intelligent Transport System (ITS) without any road facilities support, Inter-vehicle Communication (IVC) is increased attention. IVC makes it possible to exchange real-time information among vehicles without centralized infrastructure. The IVC systems use multi-hop broadcast to disseminate information. In this paper, we propose the improved AODV routing protocol based on location information. The proposed AODV routing protocol transmits Hello packet with location information to calculate the distance between nodes. Then it achieves fast link recovery. We confirm the throughput performance of the proposed AODV routing protocol compared with the AODV routing protocol using Qualnet ver.3.8 simulator.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.305-321
• /
• 2012

Since Internet Protocol (IP) is the most important protocol in Next Generation Networks (NGNs), 3rd Generation Partnership Project (3GPP) utilizes Session Initial Protocol (SIP) based on IP as the base protocol for negotiating sessions in IP Multimedia Subsystem (IMS). Different from traditional circuit-switched network, in IMS, the media traffic and signaling are delivered through IP transport. The media traffic may affect the signaling efficiency in core network, due to traffic collisions and best effort packets delivery. This paper proposes a novel path-migration mechanism for enhancing the traffic efficiency in integrated NGN-IMS. The simulation results show that the interference and traffic collision can be reduce by applying proposed path-migration mechanism and the signaling efficiency in core network can be improved with higher system capability and voice quality.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.1
• /
• pp.21-28
• /
• 2019

Internet of Things(IoT) is a technology or environment that collects data by attaching sensors to objects and transmits the collected information to each other through wired / wireless communication in real time. It is expected that when the Internet of objects is activated, many objects can identify and recognize each other by themselves and provide various services to facilitate our lives through mutual information exchange. In addition, the internet market for things is growing rapidly each year, and various IT technologies are expected to converge. In the Internet environment of objects, data exchange technology between object devices, that is, message protocol, is classified as one of important technologies. In this paper, we examine various lightweight message protocols suitable for the Internet environment of objects, and compare the reliability of the CoAP protocol structure with the MQTT protocol for a limited environment. Finally, we confirm the reliability of TCP / TLS and WebSockets-based CoAP transmission protocol of IETF's CoRE WG that can use various transport layers other than UDP in Internet environment including cloud infrastructure.

• Annual Conference of KIPS
• /
• 2024.05a
• /
• pp.175-178
• /
• 2024

IoT is becoming more and more popular, along with the massive availability of cheap and easy-to-use IoT devices. One protocol that is often used in IoT devices is the Message Queuing Telemetry Transport (MQTT) protocol. By default, the MQTT protocol does not activate encrypted data security features. This MQTT default feature makes the transmitted and received message data vulnerable to attacks, such as eavesdropping. Therefore, this paper will design and implement encrypted data security using the lightweight cryptography algorithm. The focus of this paper will be on securing MQTT message data at the application layer. We propose a method for encrypting specific MQTT message fields while maintaining compatibility with the protocol's functionalities. The paper then analyzes the timing performance of the MQTT-LEA implementation on the Raspberry Pi 3+. Our findings demonstrate the feasibility of using LEA at the application layer to secure MQTT message communication on resource-constrained devices.

• ETRI Journal
• /
• v.32 no.2
• /
• pp.281-291
• /
• 2010

Scalable video coding (SVC) has been standardized as an extension of the H.264/AVC standard. This paper proposes a practical real-time transport protocol (RTP) packetization scheme to transport SVC video over IP networks. In combined scalability of SVC, a coded picture of a base or scalable enhancement layer is produced as one or more video layers consisting of network abstraction layer (NAL) units. The SVC NAL unit header contains a (DID, TID, QID) field to identify the association of each SVC NAL unit with its scalable enhancement layer without parsing the payload part of the SVC NAL unit. In this paper, we utilize the (DID, TID, QID) information to derive hierarchical spatio-temporal relationship of the SVC NAL units. Based on the derivation using the (DID, TID, QID) field, we propose a practical RTP packetization scheme for generating single RTP sessions in unicast and multicast transport of SVC video. The experimental results indicate that the proposed packetization scheme can be efficiently applied to transport SVC video over IP networks with little induced delay, jitter, and computational load.