• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.79-85
• /
• 2016

A concrete silo plays an important role in subsurface low- and intermediate-level waste facilities (LILW) by limiting the release of radionuclides from the silo geosphere. However, due to several physical and chemical processes the performance of the concrete structure decreases over time and consequently the concrete loses its effectiveness as a barrier against groundwater inflow and the release of radionuclides. Although a number of processes are responsible for degradation of the silo concrete, it is determined that the main cause is corrosion of the reinforcing steel. Therefore, the time it takes for the silo concrete to fail is calculated based on two factors: the initiation time of corrosion, defined as the time it takes for chloride ions to penetrate through the concrete cover, and the propagation time of corrosion. This paper aims to estimate the time taken for concrete to fail in a LILW disposal facility. Based on the United States Department of Energy (DOE) approach, which indicates that concrete fails completely once 50% of the volume of the reinforcing steel corrodes, the corrosion propagation time is calculated to be 640 years, which is the time it takes for corrosion to penetrate 0.640 cm into the reinforcing steel. In addition to the corrosion propagation time, a diffusion equation is used to calculate the initiation time of corrosion, yielding a time of 1284 years, which post-dates the closure time of the LILW disposal facility if we also consider the 640 years of corrosion propagation. The electrochemical conditions of the passive rebar surface were modified using an acceleration method. This is a useful approach because it can reduce the test time significantly by accelerating the transport of chlorides. Using instrumental analysis, the physicochemical properties of corrosion products were determined, thereby confirming that corrosion occurred, although we did not observe significant cracks in, or expansion of, the concrete. These results are consistent with those of Smartet al., 2006 who reported that corrosion products are easily compressed, meaning that cracks cannot be discerned by eye. Therefore, it is worth noting that rebar corrosion does not strongly influence the hydraulic conductivity of the concrete.

• Journal of Life Science
• /
• v.27 no.1
• /
• pp.72-77
• /
• 2017

Inorganic iron is essential for various metabolic processes, including RNA synthesis, electron transport, and oxygen detoxification in microorganisms. Many bacterial pathogens compete for iron acquisition in diverse environmental condition such as host. Salmonella Typhimurium SL1344 also requires inorganic iron as a cofactor for growth. When a M9 minimal liquid medium was supplemented with ethylenediamine di-o-hydroxyphenylactic acid (EDDA) which acts as an iron-chelating agent, growth of Salmonella Typhimurium SL1344 in the supplemented medium was completely arrested by deficient of useful iron under iron-depleted condition. However, a number of siderophores, which are small, high-affinity iron chelating compounds secreted by microorganisms such as bacteria and fungi, were produced for utilization of restricted iron under iron-depleted condition. A M9 minimal liquid medium complemented with human transferrin (hTf)-iron complex turned completely off production of siderophores, but growth of Salmonella Typhimurium SL1344 maintained level similar to compare one complemented with iron (III) chloride (FeCl3). This means that human transferrin (hTf)-bound iron can utilize via directly interaction with Salmonella Typhimurium SL1344 without productions of siderophores. Through construction and analysis of negative mutant for utilization of human transferrin (hTf)-bound iron, we confirm that the bacterium can directly use human transferrin (hTf)-bound iron without extracellularly intermediated carriers such as siderophores.

• Korean Journal of Biological Psychiatry
• /
• v.2 no.1
• /
• pp.3-19
• /
• 1995

Numerous investigators have conducted extensive investigation in the search for biological markers in psychiatric illness. There are, as a test of q biological approach to the diagnosis of the psychiatric illness, tests for the neurotransmitters, their metabolites, and related enzymes, the neurotransmitter receptors, the neuroendocrine output and response, the membrane transport, peptides and eletrolytes. They are called the biological markers, and they are helpful for the diagnosis or differential diagnosis, choice of treatment or drugs, symptom improvement, predictor of recurrence and anticipation of suicidal attempt. These studies are among the main purposes that are pursued in the neuroscience and based on the potential utility of the biological markers mentioned above. Since 1970's, lots 01 biological markers' studies for the diagnosis, differential diagnosis or subtypes differentiation have been done but varieties of different opinions have been drawn since then through they could explain the charaters of main psychiatric illness(especially schizophrenia and mood disorder). But, the search for biological markers, including displines of neuroendoclinology and neurochemistry(neurotransmitter and thair metabolite), has yielded a number of putative trait merkers and state markers for psychayric illness. This paper aims to anticipate or evaluate the good response to the therapy(Therpeutic response) with lots of markers. Acoording to the diagnosis of lots of diseases or subtypes, we are going to review the papers, mainly concern with 'Is there any Marker' or 'Is any test possible to detect the improvement clinically?' 'Is it possible to predict the recurrence or good prognsis?' or 'Is it possible to select any drug or therapy to bring the good response?' The biological tests to review are mainly the metabolites of catecholamine neurotransmitter, and especially neuroendocrine test based on the knowledge that hormons of the adenohypophysis are influenced by activity of the cerebral or limbic neurons as well as the hypothalamus ones. Among them, author introduced some clinically available tests that are DST, TRH stimulation test(TRHST), GH stimulation test, and the urine MHPG test that can give us the evaluation of the treatment response, the predictor for recurrence or choice of drug that can bring a good response. So author discussed thair potential utility in clarifying, therapeutic, and prognostic issues in psychatric illness. We hope they'll be used and look forward to more active study on the different opinion.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.1
• /
• pp.23-32
• /
• 1999

A new numerical method using solution-adaptive grids (SAG) is developed to solve the Richards' equation (RE) for unsaturated flow in porous media. Using a grid generation technique, the SAG method automatically redistributes a fixed number of grid points during the flow process, so that more grid points are clustered in regions of large solution gradients. The method uses the coordinate transformation technique to employ a new transformed RE, which is solved with the standard finite difference method. The movement of grid points is incorporated into the transformed RE, and therefore all computation is performed on fixed grid points of the transformed domain without using any interpolation techniques. Thus, numerical difficulties arising from the movement of the wetting front during the infiltration process have been substantially overcome by the new method. Numerical experiments for an one-dimensional infiltration problem are presented to compare the SAG method to the modified Picard method using a fixed grid. Results show that accuracy of a SAG solution using 41 nodes is comparable with the solution of the fixed grid method using 201 nodes, while it requires only 50% of the CPU time. The global mass balance and the convergence of SAG solutions are strongly affected by the time step size (Δt) and the weighting parameter (${\gamma}$) used for generating solution-adaptive grids. Thus, the method requires automated readjustment of Δt and ${\gamma}$ to yield mass-conservative and convergent solutions, although it may increase computational costs. The method can be effective especially for simulating unsaturated flow and other transport problems involving the propagation of a sharp-front.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.6
• /
• pp.62-71
• /
• 2008

Soil quality standards (SQS) are necessary to protect the human health and soil biota from the exposure to soil pollutants. The current SQS in Korea contain only sixteen substances, and it is scheduled to expand the number of substances. Chemical ranking and scoring (CRS) system is very effective to screen the priority chemicals for the future SQS in terms of their toxicity and exposure potential. In this study, several CRS systems were extensively compared to propose the assessment factors that required for the screening of soil pollutants The CRS systems considered in this study include the CHEMS-1 (Chemical Hazard Evaluation for Management Strategies), SCRAM (Scoring and Ranking Assessment Model), EURAM (European Union Risk Ranking Method), ARET (Accelerated Reduction/Elimination of Toxics), CRSKorea, and other systems. The additional assessment factors of CRS suitable for soil pollutants were suggested. We suggest soil adsorption factor as an appropriate factor of CRS system to consider chemical transport from soil to groundwater. Other factors such as soil emission rate and cases of accident of soil pollutants were included. These results were reflected to screen the priority chemicals in Korea, as a part of the project entitled ‘Setting the Priority of Soil Contaminants'.

• Korean Journal of Materials Research
• /
• v.20 no.11
• /
• pp.606-610
• /
• 2010

Films consisting of a silicon quantum dot superlattice were fabricated by alternating deposition of silicon rich silicon nitride and $Si_3N_4$ layers using an rf magnetron co-sputtering system. In order to use the silicon quantum dot super lattice structure for third generation multi junction solar cell applications, it is important to control the dot size. Moreover, silicon quantum dots have to be in a regularly spaced array in the dielectric matrix material for in order to allow for effective carrier transport. In this study, therefore, we fabricated silicon quantum dot superlattice films under various conditions and investigated crystallization behavior of the silicon quantum dot super lattice structure. Fourier transform infrared spectroscopy (FTIR) spectra showed an increased intensity of the $840\;cm^{-1}$ peak with increasing annealing temperature due to the increase in the number of Si-N bonds. A more conspicuous characteristic of this process is the increased intensity of the $1100\;cm^{-1}$ peak. This peak was attributed to annealing induced reordering in the films that led to increased Si-$N_4$ bonding. X-ray photoelectron spectroscopy (XPS) analysis showed that peak position was shifted to higher bonding energy as silicon 2p bonding energy changed. This transition is related to the formation of silicon quantum dots. Transmission electron microscopy (TEM) and electron spin resonance (ESR) analysis also confirmed the formation of silicon quantum dots. This study revealed that post annealing at $1100^{\circ}C$ for at least one hour is necessary to precipitate the silicon quantum dots in the $SiN_x$ matrix.

• Journal of Information Management
• /
• v.42 no.2
• /
• pp.151-165
• /
• 2011

Patent information as the innovative index for activity of industry, science and technology reflects the inventive outcome of the nation, region, technology, or company etc.. and is able to be used as a tool evaluating the R&D product and technology diffusion. In this study, the index for analysing the productivity, innovation, and activity of the technology is provided to evaluate the technology in fields of the pharmaceutic, transport, biotechnology, textile, construction, machine parts, information media, and electric/telecommunication, which are becoming the national core technology. As a result of analysis, the technology activity in fields of the construction, pharmaceutic, and biotechnology shows a growing trend which reflect the interest in the quality and the extension of the life, but vice versa in fields of the textile, and information media. The innovation index in fields of the construction, pharmaceutic, and biotechnology index more than average, but vice versa in fields of the information media and electric/telecommunication. In case of technology productivity, more than 2 patentees are included in one patented technology. It has been determined that the technology productivity is decreased because of an increasing number of researcher participating the technology development, which is the recent trend of technology advancement.

• The Korean Journal of Air & Space Law and Policy
• /
• v.25 no.2
• /
• pp.79-112
• /
• 2010

The Beijing Convention of 2010 taken together effectively establishes a new broader and stronger civil aviation security framework. This adoption would significantly advance cooperation in prevent of the full range of unlawful acting relation to civil aviation and the prosecution and punishment of offenders. First, the Beijing Convention of 2010 will require parties to criminalize a number of new and emerging threats to the safety of civil aviation, including using aircraft as a weapon and organizing, directing and financing acts of terrorism. These new treaties reflect the international community's shared effort to prevent acts of terrorism against civil aviation and to prosecute and punish those who would commit them. Second, this convention will also require States to criminalize the transport of biological, chemical, nuclear weapons and related material. These provisions reflect the nexus between non-proliferation and terrorism and ensure that the international community will act to combat both. Third, this Convention shall not apply to aircraft used in military, customs or police services. As a substitute, International Humanitarian Law will be applied in a case. Moreover, the National Jurisdiction and the application of the law will be extended farther. The treaty promotes cooperation between States while emphasizing the human rights and fair treatment of terrorist suspects.

• Journal of Korea Port Economic Association
• /
• v.24 no.2
• /
• pp.209-239
• /
• 2008

The purpose of this paper is to investigate the effectiveness of Korean port investment by using the newly developed slack-based multi-year panel congestion model of DEA(Data Envelopment Analysis). Inputs[port investment amount, cargo handling capacity, and berthing capacity], and outputs[cargo handling amount, number of ship calls, revenue, and score of customer service satisfaction] are used during 1994-2004 for 20 Korean seaports. Empirical analysis identified congestion especially in port investment as input at the ports of Gunsan, and Busan in the all 3 models, and the ports of Pyungtag, Mogpo, Yeosu, and leju in over 2 models. Port investment induced the rapid increase of port efficiency from the ports of Masan, Incheon, Donghae, and Samcheok. Therefore other ports except these ports should examine the reason about the inefficiency of port investment by searching out the situation of each ports directly. The main policy implication based on the findings of this study is that The Ministry of Land, Transport and Maritime Affairs in Korea should introduce the new measurement way after reviewing the multi-year slack-based congestion approach when the amount of port investment for each port is decided.

• Atmosphere
• /
• v.25 no.2
• /
• pp.221-233
• /
• 2015

Pollen is closely related to health issues such as allergenic rhinitis and asthma as well as intensifying atopic syndrome. Information on current and future spatio-temporal distribution of allergenic pollen is needed to address such issues. In this study, the Community Multiscale Air Quality Modeling (CMAQ) was utilized as a base modeling system to forecast pollen dispersal from oak trees. Pollen emission is one of the most important parts in the dispersal modeling system. Areal emission factor was determined from gridded areal fraction of oak trees, which was produced by the analysis of the tree type maps (1:5000) obtained from the Korea Forest Service. Daily total pollen production was estimated by a robust multiple regression model of weather conditions and pollen concentration. Hourly emission factor was determined from wind speed and friction velocity. Hourly pollen emission was then calculated by multiplying areal emission factor, daily total pollen production, and hourly emission factor. Forecast data from the KMA UM LDAPS (Korea Meteorological Administration Unified Model Local Data Assimilation and Prediction System) was utilized as input. For the verification of the model, daily observed pollen concentration from 12 sites in Korea during the pollen season of 2014. Although the model showed a tendency of over-estimation in terms of the seasonal and daily mean concentrations, overall concentration was similar to the observation. Comparison at the hourly output showed distinctive delay of the peak hours by the model at the 'Pocheon' site. It was speculated that the constant release of hourly number of pollen in the modeling framework caused the delay.