• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.75-81
• /
• 2010

COMS (Communication, Ocean and Meteorological Satellite) is the multi-purposed Korean geostationary satellite funded by four Korean government ministries, and is to supply communication services, ocean and weather observation for 7 years. As part of COMS, development of Ka band communication payload composed of microwave switching transponder and multi-horn antenna is sponsored by KCC (Korea Communications Commission) and developed by ETRI (Electronics and Telecommunications Research Institute). The purpose of Ka Payload development is to acquire space proven technology of Ka payload and to exploit advanced multimedia communication services. This paper aims to study development technology of Ka payload system through whole process of ETRI project. Also application of Ka payload will be dealt in this paper.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.353-358
• /
• 1998

This paper presents development of a LNA operating at 1.71 ∼ 1.18 GHz used for a receiver of KOREA PCS base station and transponder. Using resistive decoupling circuits, a signal at low frequency is dissipated by a resistor. This design method increases the stability of the LNA and suitable for input stage matching. The LNA consists of low noise GaAs FET ATF-10136 and internally matched VNA-25. The LNA is fabricated with both the RF circuit and the self-bias circuits in aluminum housing. As a result, the characteristics of the LNA implemented here shows 30 dB in gain and 0.85 dB in noise figure.

• Journal of Sensor Science and Technology
• /
• v.21 no.2
• /
• pp.103-108
• /
• 2012

Radiofrequency(RF) signal is a key medium to the most of the present wireless communication devices including RF identification devices(RFID) and smart sensors. However, the most critical barrier to overcome in RFID application is in the failure rate in detection. The most notable improvement in the detection was from the introduction of EPC Class1 Gen2 protocol, but the fundamental problems in the physical properties of the RF signal drew less attention. In this work, we focused on the physical properties of the RF signal in order to understand the failure rate by noting the existence of the ground planes and noise sources in the real environment. By using the mathematical computation software, Maple, we simulated the distribution of the electromagnetic field from a dipole antenna when ground planes exist. Calculations showed that the dark area can be formed by interference. We also constructed a test system to measure the failure rate in the detection of a RFID transponder. The test system was composed of a fixed RFID reader and an EPC Class1 Gen2 transponder which was attached to a scanner to sweep in the x-y plane. Labview software was used to control the x-y scanner and to acquire data. Tests in the laboratory environment showed that the dark area can be as much as 43 %. One who wants to use RFID and smart sensors should carefully consider the extent of the dark area.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.1
• /
• pp.20-23
• /
• 2010

The analog front end (AFE) of a radio frequency identification transponder using the ISO 14443 type A standard with a 100% amplitude shift keying (ASK) modulation is proposed in this paper and verified by circuit simulations and measurements. This AFE circuit, using a 13.56 MHz carrier frequency, consists of a rectifier, a modulator, a demodulator, a regulator, a power on reset, and a dynamically enabled digital phase locked loop (DPLL). The DPLL, with a charge pump enable circuit, was used to recover the clock of a 100% modulated ASK signal during the pause period. A high voltage lateral double diffused metal-oxide semiconductor transistor was used to protect the rectifier and the clock recovery circuit from high voltages. The proposed AFE was fabricated using the $0.18\;{\mu}m$ standard CMOS process, with an AFE core size of $350\;{\mu}m\;{\times}\;230\;{\mu}m$. The measurement results show that the DPLL, using a demodulator output signal, generates a constant 1.695 MHz clock during the pause period of the 100% ASK signal.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.1
• /
• pp.119-124
• /
• 2022

Successful underwater localization requires a large-scale, parallel computing environment that can be mounted on various underwater robots. Accordingly, we propose a design method for an artificial intelligence computing platform for underwater localization. The proposed platform consists of a total of four hardware modules. Transponder and hydrophone modules transmit and receive sound waves, and the FPGA module rapidly pre-processes the transmitted and received sound wave signals in parallel. Jetson module processes artificial intelligence based algorithms. We performed a sound wave transmission/reception experiment for underwater localization according to distance in an actual underwater environment. As a result, the designed platform was verified.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.15-25
• /
• 2008

Ocean-bottom seismometer (OBS) positions are one of the key parameters in an OBS-airgun seismic survey for crustal structure study. To improve the quality of these parameters, we have developed a new method of determining OBS positions, using airgun shot data and bathymetric data in addition to available distance measurements by acoustic transponders. The traveltimes of direct water waves emitted by airgun shots and recorded by OBSs are used as important information for determining OBS locations, in cases where there are few acoustic transponder data (<3 sites). The new method consists of two steps. A global search is performed as the first step, to find nodes of the bathymetric grid that are the closest to explaining the observed direct water-wave traveltimes from airgun shots, and acoustic ranging using a transponder system. The use of precise 2D bathymetric data is most important if the bottom topography near the OBS is extremely rough. The locations of the nodes obtained by the first step are used as initial values for the second step, to avoid falling into local convergence minima. In the second step, a non-linear inverse method is executed. If the OBS internal clock shows large drift, a secondary correction for the OBS internal clock is obtained, as well as the OBS location, as final results by this method. We discuss the error and the influence of each measurement used in the determination of OBS location.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.45-52
• /
• 2008

We investigated the design of an RF-powered, wireless temperature sensor tag chip using $0.18-{\mu}m$ CMOS technology. The transponder generates its own power supply from small incident RF signal using Schottky diodes in voltage multiplier. Ambient temperature is measured using a new low-power temperature-to-voltage converter, and an 8-bit single-slope ADC converts the measured voltage to digital data. ASK demodulator and digital control are combined to identify unique transponder (ID) sent by base station for multi-transponder applications. The measurement of the temperature sensor tag chip showed a resolution of $0.64^{\circ}C/LSB$ in the range from $20^{\circ}C$ to $100^{\circ}C$, which is suitable for environmental temperature monitoring. The chip size is $1.1{\times}0.34mm^2$, and operates at clock frequency of 100 kHz while consuming $64{\mu}W$ power. The temperature sensor required a -11 dBm RF input power, supported a conversion rate of 12.5 k-samples/sec, and a maximum error of $0.5^{\circ}C$.

• Korean Journal of Environmental Biology
• /
• v.27 no.2
• /
• pp.146-154
• /
• 2009

To suggest effective ways of the management of reptiles in Korea national parks, we applied PIT (passive integrated transponder) tag and radio telemetry research methods in the monitoring of reptiles in Odaesan and Woraksan national parks. We implanted PIT tags into 137 snakes (six species) captured in both the national parks between March 2006 and October 2008 and also radio-tracked two Korean rat snakes (Elaphe schrenckii anomala) from September 2007 to November 2008 in the Woraksan national park. Of total 137 snakes which we had inserted the PIT tag, 17 snakes (12.40%) were recaptured. Based on the PIT tag data of the recapture, we successfully obtained the annual growth rate of Korean cat snakes (Elaphe dione) and Red-tongue pit-viper (Gloydius ussuriensis). Home range of the Korean rat snakes based on the data of radiotracking was estimated as 389,600$m^2$ (MCP: Minimum convex polygon) and 471,800$m^2$ (Kernel 95%) for males and 162,500$m^2$ and 208,700$m^2$ for females. These results suggest that if we apply PIT tag and radio telemetry research methods to manage reptiles in Korea national parks, it could greatly increase our understanding about their basic ecology and as the result, it could allow us to develop better management and conservation ways of reptiles in Korea national parks.

• 한국ITS학회:학술대회논문집
• /
• 2003.11a
• /
• pp.174-177
• /
• 2003

• Defense and Technology
• /
• no.12 s.286
• /
• pp.74-83
• /
• 2002

현재 군에서 사용 중인 통신위성의 활용현황은 무궁화 위성 2호 트랜스폰더(Transponder) 1조를 임대하여 상용휴대용, 차량용, 해상용, 공중용 단말기를 이용하여 운용중에 있으며, 해사통신위성(INMARSAT)을 활용하여 원거리 통신망으로 운용중에 있다. 그러나 이와 같은 위성통신 체계만으로는 한반도 지역의 미래전장을 주도적으로 이끌어 갈 수 있는 지휘통제통신체계를 구현할 수 없기에 앞으로 개발 될 위성통신체계에 대한 사용자, 즉 군의 운용관점에서 요구사항을 식별하여 제시하고자 한다.