• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.478-485
• /
• 2012

A series of transparent polyimide (PI) nanocomposite films was synthesized from bicyclo(2,2,2)oct-7-ene-2,3,5,6-tetracarboxylic dianhydride (BTDA) and 1,3-bis(3-aminophenoxy)benzene (BAPB) with various organoclay contents via solution intercalation polymerization to poly(amic acid)s, followed by thermal imidization. Varying organoclay loading in a range of 0 to 1.5 wt% produced variations in the optical transparency, morphology, and oxygen barrier property of the hybrids. An optimum oxygen barrier property was observed for the hybrids containing 1.0 wt% Cloisite 30B; these properties were degraded gradually by further increases in the clay content. The PI hybrid films were found to exhibit excellent optical transparency and almost no color. However, the transparency of the hybrid films decreased slightly with increasing organoclay content. Transparent PI hybrid films containing 1.0 wt% Cloisite 30B were stretched equi-biaxially with various stretching ratios in a range of 100-140% to investigate their optical transparency and oxygen permeability in detail; the variations of clay dispersion and morphology were also determined as a function of equi-biaxial stretching ratio. PI hybrid films with ${\geq}120%$ stretching were found to contain homogeneously dispersed clay in the polymer matrix and exfoliated nanocomposites. The highest barrier to oxygen permeation was found at an equi-biaxial stretching ratio of 130%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.8
• /
• pp.666-670
• /
• 2007

Aluminuim doped zinc oxide(ZnO:AL)Films have been prepared on Polyimide(PI) and Coming 7059 glass substrates by r.f. magnetron sputtering method. The structural of the ZnO:Al films were studied in accordance with various deposition R.F power and working pressure by XRD, SEM. And The electrical and optical properties of ZnO:Al films were characterized by Hall effect and UN visible spectrophotometer measurements, ZnO:Al films had were hexagonal wurtzite structure and dominant c-axis orientation. The R.f power and working pressure for optimum condition to fabricate the transparent conductive films using a PI substrate were 2 mTorr and 100W, respectively. The resistivity of the ZnO:Al films prepared under this condition were $9.6{\times}10^{-4}{\Omega}cm$. The optical transmittance of 400nm thick films at 550nm is ${\sim}85 %$.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.49-54
• /
• 2021

The display industry is transitioning from traditional rigid products such as flat panel displays to flexible or wearable ones designed to be folded or rolled. Accordingly, colorless and optically transparent polyimide (CPI) films are one of the prime candidates to substitute traditional cover glass as a passivation layer to accommodate product flexibility. However, CPI films subjected to repetitive pure bending loads inevitably entail an accumulation of residual strain that can eventually cause wrinkles or delamination in the underlying component after a certain number of static and cyclic loading. The purpose of this study is to establish an experimental method to systematically evaluate the bending residual strain of CPI films. Films were monotonically and cyclically wrapped on mandrels of various diameters to ensure a constant strain in each. After unwrapping the wound CPI film, the residual radius of curvature remaining on the film was measured and converted into residual strain. The critical radius of curvature at which residual strain does not remain was about 5 mm, and the residual strain decreased in proportion to the log time. It is expected that flexible displays can be reliably designed using the data between the applied bending strain and the residual strain.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.1
• /
• pp.12-16
• /
• 2020

Indium tin oxide (ITO) films were prepared onto transparent polyimide (PI) substrates by RF magnetron sputtering at room temperature. The deposited ITO films were heat-treated at various temperatures (50, 100, 150, and 200℃). The effect of post heat-treatment temperature on structural, electrical and optical properties of ITO films were investigated. It was found that the as-deposited ITO films were amorphous and the degree of crystallinity and the grain size increased with an increasing heat-treatment temperature, which led to the increase in carrier concentration and mobility. The electrical resistivity of as-deposited ITO films was 2.73 × 10^-3 Ω·cm. With the heat-treatment temperature increasing from 50 to 200℃, the electrical resistivity decreased from 2.93 × 10^-3 to 1.21 × 10^-4 Ω·cm. The average transmittance (400~800 nm) of the ITO deposited PI substrates was decreasing with post heat-treatment temperature and was above 81 % for the temperatures 50~150℃ and decreased considerably to 78 % at 200℃.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.204-210
• /
• 2005

We describe a colorless, transparent polyimide films for plastic display substrate which should have heat resistance, roll-to-roll processability and low CTE (coefficient of thermal expansion) property. Colorless polyimides were synthesized from 3,3',4,4'-oxydiphthalic anhydride (ODPA) 4,4'-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) and diamines such as sulfonyldianiline, aminophenoxybenzene (TPE-p, TPE-q, TPE-r) and bis[4-(3-aminophen oxy)phenyl] sulfone (m-BAPS). Their optical properties were measured by UV spectrophotometer, colormeter and hazemeter. We prepared polyimide/organophilic layered silicate nanocomposite to improve dimension stability. These colorless polyimide films showed UV transmittance by the level upper $89\%$, at 440 nm and excellent optical property having the value under yellow index (YI)=7. In addition, polyimide nanocomposite films also showed an improvement of CTE value as decreased according to the amount of layered silicate contents.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.5
• /
• pp.374-378
• /
• 2010

The effects of $O_2$ plasma pretreatment on the properties of Ga-doped ZnO films on polyimide substrate were studied. GZO films were fabricated by RF magnetron sputtering process. To improve surface energy and adhesion between the polyimide substrate and the GZO film, $O_2$ plasma pretreatment process was used prior to GZO sputtering. As the RF power and the treatment time increased, the crystallinity increased and the contact angle decreased significantly. When the RF power was 100 W and the treatment time was 120 sec, the resistivity of GZO films on the polyimide substrate was $1.90{\times}10^{-3}{\Omega}-cm$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.203-203
• /
• 2012

The SWCNTs network are formed on various plastic substrates such as poly(ethylene terephthalate) (PET), polyimide (PI) and soda lime glass using roll-to-roll printing and spray process. Selective patterning of carbon nanotubes film on transparent substrates was performed using a femtosecond laser. This process has many advantages because it is performed without chemicals and is easily applied to large-area patterning. It could also control the transparency and conductivity of CNT film by selective removal of CNTs. Furthermore, selective cutting of carbon nanotube using a femtosecond laser does not cause any phase change in the CNTs, as usually shown in focused ion beam irradiation of the CNTs. The patterned SWCNT films on transparent substrate can be used electrode layer for touch panels of flexible or flat panel display instead indium tin oxide (ITO) film.

• Polymer Science and Technology
• /
• v.23 no.3
• /
• pp.296-306
• /
• 2012

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.439-444
• /
• 2022

Laser-induced plasmonic sintering of metal nanoparticles (NPs) is a promising technology to fabricate flexible conducting electrodes, since it provides instantaneous, simple, and scalable manufacturing strategies without requiring costly facilities and complex processes. However, the metal NPs are quite expensive because complicated synthesis procedures are needed to achieve long-term reliability with regard to chemical deterioration and NP aggregation. Herein, we report laser-induced Ag NP self-generation and sequential sintering process based on low-cost Ag organometallic material for demonstrating high-quality microelectrodes. Upon the irradiation of laser with 532 nm wavelength, pre-baked Ag organometallic film coated on a transparent polyimide substrate was transformed into a high-performance Ag conductor (resistivity of 2.2 × 10^-4 Ω·cm). To verify the practical usefulness of the technology, we successfully demonstrated a wearable transparent heater by using Ag-mesh transparent electrodes, which exhibited a high transmittance of 80% and low sheet resistance of 7 Ω/square.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.480-484
• /
• 2010

A series of poly(amic acid)s(PAAs) was prepared by reacting 4,4'-(4,4'-isopropylidenediphenoxy) bis(phthalic anhydride)(BPADA) as the anhydride monomer and 2,2'-bis(trifluoromethyl) benzidine (TFB), bis(3-aminophenyl)sulfone (APS), 4,4'-methylenebis-(2-methylcyclohexylamine) (MMCA), or bis[4-(3-aminophenoxy) phenyl] sulfone (BAPS) as the amine monomer with 5 mol% melamine in N,N-dimethylacetamide (DMAc). Colorless and transparent polyimide (PI) films were obtained by casting the PAAs at various heat treatment temperatures. The thermo-mechanical properties and optical transparency of the PI films were investigated. The thermal properties of the PI films were examined using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and thermomechanical analysis (TMA), and their optical transparency were measured by spectrophotometry. The coefficient of thermal expansion (CTE) and yellow index (YI) values of all samples were in the range of $48.53-64.24ppm/^{\circ}C$ and < 3.0, respectively.