• 한국항공우주학회지
• /
• 제33권6호
• /
• pp.31-38
• /
• 2005

하중해석을 위한 선형 패널법에서 압력과 다운워시와의 관계는 공력영향계수로 표현되며 점성 효과는 무시되고 천음속 영역에서 압축성 효과를 적절히 표현하지 못한다. 공력영향계수는 공력면의 평면형상에 의해 결정되므로 저 레이놀즈 수의 유동의 특성을 나타내는 데는 한계가 있다. 따라서 공력계수의 시험치를 구속조건으로 하여 압력분포를 직접 보정하거나 다운워시를 보정하여 유효 캠버나 두께를 반영하여 압력분포를 보정하게 된다. 본 논문에서는 전승보정방법과 후승보정방법을 초소형 비행체의 균형해석 및 하중해석을 위한 공기력 보정에 적용하였다. 이론적인 공기력은 패널법을 이용하였으며 단일 구속조건과 이중 구속조건을 적용하여 보정행렬과 보정된 압력계수를 구하였다. 초소형 비행체의 공력보정에 있어서 비행영역의 특성으로 인해 후승보정방법이 보다 나은 결과를 나타내었다.

• 한국항공우주학회지
• /
• 제36권3호
• /
• pp.211-219
• /
• 2008

본 연구에서는 삼차원 비정렬 비점성 유동 해석 코드를 이용하여 전투기 형상의 외부 장착물이 꼬리 날개에 미치는 공력 간섭효과에 대한 연구를 수행하였다. 수치적 기법으로는 격자점 중심(vertex-centered)에 기초한 유한체적법과 시간 적분을 위한 내재적인 point Gauss-Seidel 반복 계산법을 사용하였다. 해석 코드의 검증을 위해 전투기 형상에 대한 정상 유동 계산을 수행하였으며 결과를 실험 데이터와 비교하였다. 외부 장착물의 후류(wake)를 정확히 포착하기 위해 예상되는 후류 영역에 대해 국부적인 격자 조밀화를 수행하였으며 천음속 영역에서의 비정상 유동 해석을 통해 외부 장착물에서 발생하는 후류가 수평꼬리날개에 미치는 간섭효과를 확인하였다. 공력 간섭효과를 감소시키기 위한 대안으로는 뒷전 플랩 꺽임각(trailing edge flap deflection)을 고려하였으며 이에 대한 정량적인 감소효과를 제시하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.95-104
• /
• 2007

A new design approach of complex geometries such as wing/body configuration is arranged by using overset mesh techniques under large scale computing environment. For an in-depth study of the flow physics and highly accurate design, several special overlapped structured blocks such as collar grid, tip-cap grid, and etc. which are commonly used in refined drag prediction are adopted to consider the applicability of the present design tools to practical problems. Various pre- and post-processing techniques for overset flow analysis and sensitivity analysis are devised or implemented to resolve overset mesh techniques into the design optimization problem based on Gradient Based Optimization Method (GBOM). In the pre-processing, the convergence characteristics of the flow solver and sensitivity analysis are improved by overlap optimization method. Moreover, a new post-processing method, Spline-Boundary Intersecting Grid (S-BIG) scheme, is proposed by considering the ratio of cell area for more refined prediction of aerodynamic coefficients and efficient evaluation of their sensitivities under parallel computing environment. With respect to the sensitivity analysis, discrete adjoint formulations for overset boundary conditions are derived by a full hand-differentiation. A smooth geometric modification on the overlapped surface boundaries and evaluation of grid sensitivities can be performed by mapping from planform coordinate to the surface meshes with Hicks-Henne function. Careful design works for the drag minimization problems of a transonic wing and a wing/body configuration are performed by using the newly-developed and -applied overset mesh techniques. The results from design applications demonstrate the capability of the present design approach successfully.

• 동의생리병리학회지
• /
• 제17권5호
• /
• pp.1224-1230
• /
• 2003

The purpose of this present study is to measure the changes of regional cerebral blood flow(rCBF) and blood pressure(BP) in rats. following the intravenous injection of drug. The measurement was continually monitored by laser-doppler flowmeter (Transonic Instrument, USA) and pressure tranducer(Grass, USA) in anesthetized adult Sprague-Dawley rats about for 2h to 2h and a half through the data acquisition system composed of MacLab and Macintosh computer. The result of this experiment was as following. 1. Fructus Schizandrae increased the changes of rCBF in rats, significantly. 2. The rCBF of Fructus Schizandrae did not change by pretreated propranolol. 3. The rCBF of Fructus Schizandrae did not change by pretreated atropine. 4. The rCBF of Fructus Schizandrae did not change by pretreated I-NNA. 5. The rCBF of Fructus Schizandrae was decreased by pretreated methylene blue. 6. The rCBF of Fructus Schizandrae did not change by pretreated indomethacin. 7. Fructus Schizandrae decreased the changes of blood pressure significantly. 8. The BP of Fructus Schizandrae did not change by pretreated propranolol. 9. The BP of Fructus Schizandrae did not change by pretreated atropine. 10. The BP of Fructus Schizandrae did nol change by pretreated I-NNA. 11. The BP of Fructus Schizandrae was decreased by pretreated methylene blue. 12. The BP of Fructus Schizandrae did not change by pretreated indomethacin. These results indicate that Fructus Schizandrae can increase the rCBF and decrease the BP, that related to guanylyl cyclase activity.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권4호
• /
• pp.601-613
• /
• 2017

An adjoint-based error estimation and mesh adaptation study is conducted for two-dimensional viscous flows on unstructured hybrid meshes. The error in an integral output functional of interest is estimated by a dot product of the residual vector and adjoint variable vector. Regions for the mesh to be adapted are selected based on the amount of local error at each nodal point. Triangular cells in the adaptive regions are refined by regular refinement, and quadrangular cells near viscous walls are bisected accordingly. The present procedure is applied to single-element airfoils such as the RAE2822 at a transonic regime and a diamond-shaped airfoil at a supersonic regime. Then the 30P30N multi-element airfoil at a low subsonic regime with a high incidence angle (${\alpha}=21deg.$) is analyzed. The same level of prediction accuracy for lift and drag is achieved with much less mesh points than the uniform mesh refinement approach. The detailed procedure of the adjoint-based mesh refinement for the multi-element airfoil case show that the basic flow features around the airfoil should be resolved so that the adjoint method can accurately estimate an output error.

• 한국전산유체공학회지
• /
• 제17권1호
• /
• pp.54-60
• /
• 2012

Transition prediction results are validated with experimental data obtained from a transonic wind tunnel for the KU109C airfoil. A Reynolds-Averaged Navier-Stokes code is simultaneously coupled with the transition transport model of Langtry and Menter and applied to the numerical prediction of aerodynamic performance of the KU109C airfoil. Drag coefficients from the experiment are better correlated to the numerical prediction results using a transition transport model rather than the fully turbulent simulation results. Maximum lift coefficient and drag divergence at the zero-lift condition with Mach number are investigated. Through the present validation procedure, the accuracy and usefulness of both the experiment and the numerical prediction are assessed.

• 한국전산유체공학회지
• /
• 제19권2호
• /
• pp.58-65
• /
• 2014

The adaptive wavelet method is studied for the enhancement of computational efficiency of three-dimensional flows. For implementation of the method for three-dimensional Euler equation, wavelet decomposition process is introduced based on the previous two-dimensional adaptive wavelet method. The order of numerical accuracy of an original solver is preserved by applying modified thresholding value. In order to assess the efficiency of the proposed algorithm, the method is applied to the computation of flow field around ONERA-M6 wing in transonic regime with 4th and 6th order interpolating polynomial respectively. Through the application, it is confirmed that the three-dimensional adaptive wavelet method can reduce the computational time while conserving the numerical accuracy of an original solver.

• 한국항공우주학회지
• /
• 제30권1호
• /
• pp.9-19
• /
• 2002

AUSMPW+의 해의 정확성은 음속의 정의와 밀접한 관계가 있다. 아음속, 천음속 그리고 초음속 유동 영역에서 제어면의 음속의 해의 정확성에 어떠한 영향을 미치는지 살펴보았다. AUSMPW+에서 정의된 음속의 특징은 충격파 포착시 정확성 향상과 엔트로피 조건을 만족시키기 위한 팽창충격과 현상을 제거로 요약될 수 있다. 수학적 증명과 수치실험을 통해 이를 확인할 수 있었다. 그리고 반응 기체로 확장하여 평형, 비평형 기체에 대해서도 충격파를 정확하게 포착할 수 있는 음속을 제시하였고 이를 여러 가지 수치 실험을 통해 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.742-748
• /
• 2004

In this paper are presented TSTO system analysis including some controlled variables on the engine operation such as a fuel flow rate and a pressure ratio of compressor, as well as variables on the trajectory. TSTO studied here is accelerated up to Mach 6 by a fly-back booster powered by air breathing engines. Three different types of engine cycle were treated for propulsion system of the booster, such as a turbo ramjet, a precooled turbojet and an EXpander cycle Air Turbo Ramjet (ATREX). The history of the controlled variables on the engine operation was optimized by Sequential Quadratic Programming (SQP) to accomplish the minimum fuel consumption. The trajectory was also optimized simultaneously. The results showed that the turbo ramjet gave the best fuel consumption. The optimal trajectory was almost the same except in the transonic range and just before reaching to Mach 6. The history of the pressure ratio of compressor considerably depended on the engine type. It is concluded that simultaneous optimization for engine control and trajectory is effective especially for a high-speed airplane propelled by turbojets like the TSTO booster.

• 한국항공운항학회지
• /
• 제27권4호
• /
• pp.9-20
• /
• 2019

A military aircraft generally includes external stores such as fuel tanks or external arming, depending on the purpose of the operation. When a store is dropped from a military aircraft at high subsonic, transonic, or supersonic speeds, the aerodynamic forces and moments acting on the store can be sufficient to send the store back into contact with the aircraft. This can cause damage to the aircraft and endanger the life of the crew. In this study, time accurate computational fluid dynamics (CFD) with dynamic moving grid (moving and deformable mesh, MDM) technique has been used to accurately calculate store trajectories. For the verification of the present numerical approach, a wind tunnel test model for the wing-pylon-finned store configuration has been considered and analyzed. The comparison results for the ejected store trajectories between the present numerical analysis and the wind tunnel test data at the Mach number of 0.95 and 1.2 are presented. It is also importantly shown that the numerical parameter of MDM technique gives significant effect for the calculated store trajectory in the low-supersonic flow such as Mach 1.2.