• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.224-230
• /
• 2010

Wireless power transmission (WPT) is useful technology in near future. There are some kinds of the WPT technologies, WPT via radio waves, resonance coupling, and inductive. Especially the WPT via radio waves is used for multi-purposes from short range to long range application. However, unfortunately it is misunderstood that it is low efficiency and low power. In this paper, I show the theory of beam efficiency between transmitting antennas and receiving antennas and also show some high efficient applications of the WPT via radio waves. Especially, I pick up a wireless power charging system of an electric vehicle and show the experimental results. I show difference between the theory of beam efficiency and the experimental results of short range WPT. I indicate that reasons of poor beam efficiency in the experiment are (1) change of impedance caused by mutual coupling between transmitting antennas and receiving antennas, (2) oblique direction of microwave power to receiving antennas caused by short distance.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.232-237
• /
• 2003

A new displacement-based transmitting boundary is developed for the transient analysis of dynamics interactions between flexible dam body and reservoir impounding compressible water The mechanical model is derived analytically in time domain from the kernel function, Bessel function, appearing in the convolution integral and corresponding mechanical model is developed that consists of mass, damping and stiffness matrices. The resulting system of, equations uses displacement degrees of freedom. Hence it can be coupled directly with the displacement-based solid finite element model of dam body, linear of nonlinear. The method was applied to the rigid and flexible dam models. The results showed very good agreement : with the semi-analytic frequency domain solutions.

• 한국통신학회논문지
• /
• 제40권3호
• /
• pp.425-431
• /
• 2015

빔 공간 Multiple-Input Multiple Output(MIMO) 시스템은 단일 Radio Frequency(RF)-체인을 가지는 Electronically Steerable Parasitic Array Radiator(ESPAR) 안테나를 이용하여 다수의 데이터를 동시에 전송할 수 있는 시스템이다. 단일 안테나, 단일 RF-체인을 사용하는 ESPAR 안테나의 특성에 의해 빔 공간 MIMO 시스템은 기존 MIMO 시스템에 비해 시스템의 복잡도가 줄어들고 안테나의 소형화가 가능하다. 기존에는 빔 공간 MIMO 시스템을 사용하여 단일 반송파를 전송하는 연구만이 진행되었다. 따라서 본 논문에서는 다중 반송파를 전송하기 위해 Orthogonal Frequency Division Multiplexing(OFDM) 기반의 빔 공간 MIMO 시스템을 제안하고 성능을 분석하였다. 제안하는 빔 공간 MIMO 시스템은 기생소자의 리액턴스 값에 의해 Bit Error Rate(BER) 성능이 변화하기 때문에 최적의 성능을 가지는 리액턴스 값을 찾고, 이때의 BER 성능이 기존의 MIMO OFDM 시스템의 성능과 유사한 것을 확인하였다.

• 센서학회지
• /
• 제27권4호
• /
• pp.254-258
• /
• 2018

A Wi-Fi signal network (WSN) system is introduced in this paper. This system consists of several data-transmitting sensor modules and a data-receiving server. Each sensor module and the server contain a unique intranet IP address. A piezoelectric accelerometer with a bandwidth of 12 kHz, a 24-bit analog-digital converter with a sampling rate of 15.625 kS/s, a 32-bit microprocessor unit, and a 1-Mbps Wi-Fi module are used in the data-transmitting sensor module. A 300-Mbps router and a PC are used in the server. The system is verified using an accelerometer calibrator. The voltage output from the sensor is converted into 24-bit digital data and transmitted via the Wi-Fi module. These data are received by a Wi-Fi router connected to a PC. The input frequencies of the accelerometer calibrator (320 Hz, 640 Hz, and 1280 Hz) are used in the data transfer verification. The received data are compared to the data retrieved directly from the analog-to-digital converter used in the sensor module. The comparison shows that the developed system represents the original data considerably well. Theoretically, the system can acquire vibration signals from 600 sensor modules at an accelerometer bandwidth of 15.625 kHz. However, delay exists owing to software processes, multiplexing between sensor modules, and the use of non-real time operating system. Hence, it is recommended that this system may be used to acquire vibration signals with up to 10 kHz, which is approximately 70% of the theoretical maximum speed of the system. The system can be upgraded using parts with higher performance

• International Journal of Internet, Broadcasting and Communication
• /
• 제16권2호
• /
• pp.10-21
• /
• 2024

Recently, audio systems are changing the configuration of conventional sound reinforcement (SR) systems and public address (PA) systems by using audio over IP (AoIP), a technology that can transmit and receive audio signals based on internet protocol (IP). With the advancement of IP technology, AoIP technologies are leading the audio market and various technologies are being released. In particular, audio networks and control hierarchy over peer-to-peer (Anchor) technology based on AoIP is a system that transmits and receives audio signals over a wide bandwidth without an audio mixer, creating a novel paradigm for existing audio system configurations. Anchor technology forms an audio system by connecting audio sources and output equipment with On-site audio center (OAC), a device that can transmit and receive IP. Anchor's receiving OAC is capable of receiving and mixing audio signals transmitted from different IPs, making it possible to configure a novel audio system by replacing the conventional audio mixer. However, Anchor technology does not have the ability to provide audio effects to input devices such as microphones and instruments in the audio system configuration. Due to this, when individual control of each audio source is required, there is a problem of not being able to control the input signal, and it is impossible to individually affect a specific input signal. In this paper, we implemented a tone control module that can individually control the tone of the audio source of the input device using the audio processor core in the audio system based on Anchor technology, tone control for audio sources is possible through a tone control module connected to the transmitting OAC. As a result of the study, we confirmed that OAC receives the signal from the audio source, adjusts the tone and outputs it on the tone control module. Based on this, it was possible to solve problems that occurred in Anchor technology through transmitting OAC and tone control modules. In the future, we hope that the audio system configuration using Anchor technology will become established as the standard for audio equipment.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1992년도 추계학술발표강연 및 논문개요집
• /
• pp.107-108
• /
• 1992

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1336-1337
• /
• 2008

This study developed a ILPMS (intelligent lightning protection management system) to manage and mend SPD module effectively, intelligence style bonding terminal box for transmitting SPD state data, RTU(remote terminal unit) having wireless transmission facility, so that a man in service can confirm SPD state throughout its leakage current level in a central management system.

• 식물조직배양학회지
• /
• 제21권5호
• /
• pp.253-275
• /
• 1994

Many flowering plants possess genetically controlled self -incompatibility (SI) system that prevents inbreeding and promotes outcrosses. SI is usually controlled by a single, multiallelic S-locus. In gametophytically controlled system, SI results when the S-allele of the pollen is matched by one of the two S-alleles in the style, while in the sporophytic system self-incompatible reaction occurs by the interaction between the pistil genotype and genotype of, not the pollen, but the pollen parent In the former system the self-incompatible phenotype of pollen is determined by the haploid genome of the pollen itself but in the latter the pollen phenotype is governed by the genotype of the pollen parent along with the occurrence of either to-dominant or dominant/recessive allelic interactions. In the sporophytic type the inhibition reaction occurs within minutes following pollen-stigma contact, the incompatible pollen grains usually failing to germinate, whereas in gametophytic system pollen tube inhibition takes place during growth in the transmitting tissue of the style. Recognition and rejection of self pollen are the result of interaction between the S-locus protein in the pistil and the pollen protein. In the gametophytic SI the S-associated glycoprotein which is similar to the fungal ribonuclease in structure and function are localized at the intercellular matrix in the transmitting tissue of the style, with the highest concentration in the collar of the stigma, while in the sporophytic SI deposit of abundant S-locus specific glycoprotein (SLSG).is detected in the cell wall of stigmatic papillae of the open flowers. In the gametophytic system S-gene is expressed mostly at the stigmatic collar the upper third of the style length and in the pollen after meiosis. On the other hand, in the sporophytic SI S-glycoprotein gene is expressed in the papillar cells of the stigma as well as in e sporophytic tape is cells of anther wall. Recognition and rejection of self pollen in the gametophytic type is the reaction between the ribonuclease in the transmitting tissue of the style and the protein in the cytoplasm of pollen tube, whereas in the sporophytic system the inhibition of selfed pollen is caused by the interaction between the Sycoprotein in the wall of stigmatic papillar cell and the tapetum-origin protein deposited on the outer wall of the pollen grain. The claim that the S-allele-associated proteins are involved in recognition and rejection of self pollen has been made merely based on indirect evidence. Recently it has been verified that inhibition of synthesis of S$_3$ protein in Petunia inflata plants of S$_2$S$_3$ genotype by the antisense S$_3$ gene resulted in failure of the transgenic plant to reject S$_3$ pollen and that expression of the transgenic encoding S$_3$ protein in the S$_1$S$_2$ genotype confers on the transgenic plant the ability to reject S$_3$ pollen. These finding Provide direct evidence that S-proteins control the s elf-incompatibility behavior of the pistil.

• 한국통신학회논문지
• /
• 제39A권5호
• /
• pp.220-228
• /
• 2014

ESPAR(Electronically Steerable Parasitic Array Radiator) 안테나는 기존의 다중 안테나 시스템이 가지는 다중 RF-체인으로 인한 공간적인 제한과 에너지 효율의 문제를 극복하는 기술이다. 다중 안테나와 다중 RF-체인을 사용함으로써 발생하는 문제를 해결하기 위해 단일 RF 체인을 갖는 ESPAR 안테나를 사용하여 다수의 데이터를 동시에 전송할 수 있는 빔 공간 MIMO 시스템이 제안되었다. 기존 연구에서는 PSK 변조 계열에서의 빔 공간 MIMO 시스템에 대해 제안되었다. 본 논문에서는 1개의 능동소자와 2개의 기생소자를 가지는 ESPAR 안테나를 사용하여 PSK 변조뿐만 아니라 QAM 변조에서도 빔 공간 MIMO 시스템이 가능하다는 것을 밝히기 위해 16, 64-QAM 변조방식을 이용한 2x2 빔 공간 MIMO 시스템을 제안하고 성능을 평가하였다. ESPAR 안테나의 기생 소자의 리액턴스를 조절하여 리액턴스 셋을 생성하여 QAM 계열의 심볼을 생성할 수 있다는 것을 확인하고 시뮬레이션을 통해 이를 전송하여 빔 공간 MIMO 시스템의 통신성능이 기존의 MIMO 시스템과 유사하게 되는 것을 확인하였다.

• 한국컴퓨터정보학회논문지
• /
• 제20권1호
• /
• pp.185-195
• /
• 2015

병원에서 특정 시각 대에 집중하는 외래환자 접수상황을 효과적으로 해당 진료과에 전달하는 기술적 방식이 기존의 병원 접수시스템에 부재하다. 따라서 모든 진료과는 접수상황을 알기위해서 병원접수 데이터베이스 전체를 반복적으로 순차탐색하게 되고 이는 병원정보시스템 성능저하의 큰 요인이 된다. 따라서 본 논문에서는 이러한 병원 접수시스템의 효율 향상을 위해 웹소켓을 이용한 주키전송 일괄처리시스템과 접수정보전송에 의한 실시간시스템을 개발하였다. 주키전송 일괄처리시스템은 기존의 순차탐색시스템에 비해 데이터베이스 조회속도를 크게 단축하였을뿐만 아니라 접수환자 수에 무관한 빠른 조회속도를 유지하였다. 또한, 접수정보전송 실시간시스템은 데이터베이스를 조회하지 않고도 기존의 요청/응답 접수시스템의 대기환자 갱신시간을 효과적으로 줄일 수 있었다.