• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.189-197
• /
• 2016

Mobile ad-hoc networks (MANETs) experience frequent link disconnections due to non-uniform node distribution and mobility. Thus, end-to-end path establishment-based routing protocols cause frequent transmission failures in MANETs, resulting in heavy control messages for path reestablishment. While location-based MANET routing protocols, such as Greedy Perimeter Stateless Routing (GPSR), use location information to forward messages in a hop-by-hop routing fashion without an end-to-end path establishment procedure, such protocols encounter communication void problems when message forwarding to the next hop fails due to the absence of a relay node. Therefore, to solve this problem, this paper proposes a Delay Tolerant-GPSR (DT-GPSR) protocol, which combines Delay Tolerant Networking (DTN) technology with the GPSR protocol. The performance of DT-GPSR is compared with the performances of the original GPSR and PRoPHET routing protocols through simulation using NS-2. The simulation results confirm that DT-GPSR outperforms GPSR and PRoPHET in terms of the message delivery ratio and message delivery delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.178-188
• /
• 2016

The traffic in the wired and wireless networks has increased exponentially because of increase of smart phone and improvement of PC performance. Multimedia services and file transmission such as Facebook, Youtube occupy a large part of the traffic. CDN is a technique that duplicates the contents on a remote web server of content provider to local CDN servers near clients and chooses the optimal CDN server for providing the content to the client in the event of a content request. In this paper, the content request message between CDN servers and the client used the SCRP algorithm utilizing the MST algorithm and the traffic throughput was optimized. The average response time for the content request is reduced by employing HC_LRU cache algorithm that improves the cache hit ratio. The proposed SCRP and HC_LRU algorithm may build a scalable content delivery network system that efficiently utilizes network resources, achieves traffic localization and prevents bottlenecks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5A
• /
• pp.325-338
• /
• 2012

In this paper, a radio resource allocation scheme for a multi-hop relay transmission in cognitive radio (CR) system is proposed to support the employment of relay nodes in IEEE 802.22 standard for wireless regional area network (WRAN). An optimization problem is formulated to maximize the number of serving secondary users (SUs) under system constraints such as time-divided frame structure for multiplexing and a single resource-unit to every relay-hop. However, due to mathematical complexity, the optimization problem is solved with a sub-optimal manner instead, which takes three steps in the order of user selection, relay/path selection, and frequency selection. In the numerical analysis, this proposed solution is evaluated in terms of service rate denoting as the ratio of the number of serving SUs to the number of service-requesting SUs. Simulation results show the condition of adopting multi-hop relay and the optimum number of relaying hops by comparing with the performance of 1-hop system.

• The KIPS Transactions:PartC
• /
• v.16C no.2
• /
• pp.209-216
• /
• 2009

In the wireless sensor network, flooding is required for the dissemination of queries and event announcements. The simple flooding causes the implosion and the overlap problems, so the simple flooding may result in the reduced network lifetime. Therefore, in this paper, we propose the flooding overlay structure (FOS) so that the overhead caused by flooding can be reduced. We propose two variants of FOS mechanisms, the centralized FOS (CFOS) and the distributed FOS (DFOS). In CFOS, the sink collects the network topology information and selects forwarding nodes based on that information. On the other hand, DFOS allows each sensor node to decide whether to act as a forwarding node or not based on its local information. For the performance evaluation of our proposed mechanisms, we carry out NS-2 based simulations and compare ours with the simple flooding and the gossiping. The simulation results indicate that the proposed FOS mechanisms outperform the simple flooding in terms of the network lifetime and the gossiping in terms of the data delivery ratio.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.3
• /
• pp.699-709
• /
• 1999

This paper is aimed at defining items of analysis using SNMP MIB-II for the purpose of managing the Internet based network running on TCP/IP protocol, and then utilize these items, in conjunction with various Web technology and JAVA to design and implement a Web based interface of a management system to analyze the performance and status of the Internet. Among the required items in order to accomplish this task are utilization, interface packet transmission rate, I/O traffic ratio, and so on. Based on these items, the actual analysis is carried out by the Web interface according to the type of analysis. For instance, the interface executes the function of real-time analysis, collection processing, elementary analysis and detailed analysis. The demand of the user is fed into the Web interface which carried out a real-time analysis with the client system which in turn will eventually produce the results of the analysis. In order words, the interface acts as a mediator server for the analysis system. Furthermore, a protocol for exchange of data and messages between the server and the analysis system, the MATP protocol, was also designed. Finally, the results obtained through the system presented in this paper were displayed on screen according to the type of analysis. The system realized in this paper uses We technology and is independent of platform and allows the user to determine the performance of Internet at his/her own host according to the selected items of analysis.

• Journal of Powder Materials
• /
• v.14 no.4
• /
• pp.230-237
• /
• 2007

The fabrication of Fe alloy-40 wt.%TiC composite materials using spark plasma sintering process after ball-milling was studied. Raw powders to fabricate Fe alloy-TiC composite were Fe alloy, $TiH_{2}$ and activated carbon. Fe alloy powder was Distaloy AE (4%Ni-1%Cu-0.5%Mo-0.01%C-bal.%Fe) made by Hoeganes company with better toughness and lower melting point. These powders were ball-milled in horizontal attrition ball mill at a ball-to-powder weight ratio of 30 : 1. After that, these mixture powders were sintered by using spark plasma sintering apparatus for 5 min at $1200-1275^{\circ}C$ in vacuum atmosphere under $10^{-3}$ torr. DistaloyAE-40 wt.%TiC composite was directly synthesized by dehydrogenation and carburization reaction during sintering process. The phase transformation of as-milled powders and sintered materials was confirmed using X-ray diffraction (XRD) and transmission electron microscope (TEM). The density and harness materials was measured in order to confirm the densification behavior. In case of DistaloyAE-40 wt.%TiC composite retained for 5 min at $1275^{\circ}C$, it has the relative density of about 96% through the influence of rapid densification and fine TiC particle reinforced Fe-based composites materials.

• The Journal of the Korea Contents Association
• /
• v.13 no.9
• /
• pp.20-27
• /
• 2013

In recently years, with the growth of social media and the development of mobile devices, the data have been significantly increased. MapReduce is an emerging programming model that processes large amount of data. However, since MapReduce evenly places the data in the dedicated distributed computing environment, it is not suitable to the non-dedicated distributed computing environment. The data replacement algorithms were proposed for performance optimization of MapReduce in the non-dedicated distributed computing environments. However, they spend much time for date replacement and cause the network load for unnecessary data transmission. In this paper, we propose an efficient data replacement algorithm for the performance optimization of MapReduce in the non-dedicated distributed computing environments. The proposed scheme computes the ratio of data blocks in the nodes based on the node availability model and reduces the network load by transmitting the data blocks considering the data placement. Our experimental results show that the proposed scheme outperforms the existing scheme.

• Journal of Biosystems Engineering
• /
• v.26 no.5
• /
• pp.423-430
• /
• 2001

The purpose of this study is to develop high-speed rotary tillage system for a power tiller by improving the rotary blade and the power train of transmission. Mechanical structure of gear train of rotary drive of conventional power tiller was simplified so that power can be transmitted directly from second shaft to tilling speed change shaft by rotating freely the transfer gear which changes the direction of rotation of shafts using needle bearing installed into middle shaft. A new gear train suitable for the single-edged rotary blade and high-speed rotary drive was developed with the rotational speed of rotary shaft faster than 7.5% at 1st-speed and 1.4% at 2nd-speed the one of conventional system by changing the numbers of teeth of gears of middle shaft, tilling speed change shaft and PTO shaft. Using the developed gear train for high-speed rotary drive, field tests were performed to compare tillage performances by the developed single-edged blade and by the conventional double-edged blade. The results showed that the performances by the single-edged blade compared with the one by the double-edged blade was improved about 18% in field capacity, about 34% in fuel consumption, and 9.4% in soil crushing ratio. Therefore, it may be concluded that tillage performance by the single-edged blade was improved compared to the one by the conventional blade. Evaluation of the developed system consisting of single-edged blade and gear train for high-speed rotary drive in field revealed that tillage performance of the developed system was similar to the one of field test conducted using the system consisting of single-edged blade and gear train for rotary drive of conventional power tiller However, considering the higher cone index of the upland field where evaluation was carried out compare to the one of the ordinary paddy field, it may be concluded that tillage performance of the developed rotary tilling system better than the one of conventional system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.8
• /
• pp.18-22
• /
• 2015

Digitalization of the substation in Korea has been in progress so far with focusing on Station Bus. However, its application to Process Bus has been delayed due to some technical issues. IEDs based on Process Bus use the data values of SV and GOOSE. As the size of communication data on Process Bus is comparatively bigger than that of Station Bus, it is very important for the evaluating the performance of Process Bus to analyze the transferring speed and quality of data from the first equipment, which is located on process level, to station level. According to the results of related studies, it is said that the most important factor for the design and operation of Process Bus network is the communication delay with consideration of the volume of packets. In the paper, the results of performance test for the network with and without application of VLAN on Process Bus system that uses integrated IEDs are presented. Additionally, the paper proposes the optimal method to analyze the communication delays of network systems through evaluating the maximum delay time, link process ratio and the amount of lost packets by using a simulation tool.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.11
• /
• pp.6-17
• /
• 2015

In this paper, colors of broadcast lightings composed of Red, Green, and Blue LED(Light Emitted Diode) can be linearly and quantitatively controlled in low illuminance. Because LED cannot emit uniform illuminance in low illuminance, the colors of RGB LED are unmixable. Furthermore, the illuminances are nonlinear with the dimming values of the RGB LED due to the nonlinearity of the output illuminance with the current through the LED. This nonlinearity generated errors of the target colors and illuminances. The proposed algorithm set up the target colors, which is expressed by the color coordinates in CIE 1931 color space, and the target illuminances. Then the illuminances of RGB LED were calculated using color mixing theory. The calculated illuminances determined the dimming values of the RGB LED for transmission via DMX512 communication. After the broadcasting lighting received the dimming values of the RGB LED via DMX512 communication,.RGB LED can emit target color and illuminance, and be controlled by calculating the PWM(Pulse Width Modulation) duty ratio of the hybrid LED driver which be considered the nonlinearity for the illuminances of the LED. As a result, the proposed algorithm can linearly and quantitatively control the colors and illuminances in full range of illuminance. Then we verify experimentally that the errors of the emitted color coordination x, y and illuminance are 2.27%, 3.6% and 1.5%, respectively.