• 한국컴퓨터정보학회논문지
• /
• 제13권5호
• /
• pp.195-202
• /
• 2008

본 논문에서는 무선 센서 네트워크 보안 강화의 효율성을 높이기 위한 클러스터된 이기종(heterogeneous) 무선 센서네트워크 구조를 제안하였다. 본 논문에서 제안된 무선 센서 네트워크 구조는 리소스의 제한이 있는 센서 노드와 클러스터 헤드의 역활을 하는 다수의 강력한 하이엔드 장치들로 구성된다 하이엔드 클러스터 헤드는 센서 노드보다 계산량, 저장공간,파워 공급, 무선 송신 범위가 뛰어나기 때문에 센서 노드가 겪는 자원의 부족으로 인한 문제점이 발생하지 않는다. 제안된 이기종 무선 센서 네트워크의 구조는 클러스터 헤더에 신뢰 컴퓨팅 기술이 접목되어 있는 것을 특징으로 하며, 특히 각 클러스터 헤더에 신뢰 컴퓨팅 그룹에서 정의한 표준을 따르는 신뢰 플랫폼 모듈이 포함되어 있다. 신뢰 컴퓨팅 그룹에서 정의한 표준에 의하면, 신뢰 플랫폼 모듈은 암호 연산을 수행할 수 있으며 외부 공격으로부터 내부 데이터를 보호할 수 있는 하나의 독립적인 프로세서이다. 또한 호스트에 포함된 신뢰 플랫폼 모듈은 데이터를 안전하게 저장하는 기능과 호스트의 상태를 측정하고 이를 보고하는 기능을 제공함으로써 신뢰 컴퓨팅이 가능하도록 한다.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.261-273
• /
• 2014

In this paper, metal insulator metal (MIM) plasmonic slot cavity narrow band-pass filters (NBPFs) are studied. The metal and dielectric of the structures are silver (Ag) and air, respectively. To improve the quality factor and attenuation range, two novel NBPFs based on tapered structures and double cavity systems are proposed and numerically analyzed by using the two-dimensional (2-D) finite difference time domain (FDTD) method. The impact of different parameters on the transmission spectrum is scrutinized. We have shown that increasing the cavities' lengths increases the resonance wavelength in a linear relationship, and also increases the quality factor, and simultaneously the attenuation of the wave transmitted through the cavities. Furthermore, increasing the slope of tapers of the input and output waveguides decreases attenuation of the wave transmitted through the waveguide, but simultaneously decreases the quality factor, hence there should be a trade-off between loss and quality factor. However, the idea of adding tapers to the waveguides' discontinuities of the simple structure helps us to improve the device total performance, such as quality factor for the single cavity and attenuation range for the double cavity. According to the proposed NBPFs, two, three, and four-port power splitters functioning at 1320 nm and novel ultra-compact two-wavelength and triple-wavelength demultiplexers in the range of 1300-1550 nm are proposed and the impacts of different parameters on their performances are numerically investigated. The idea of using tapered waveguides at the structure discontinuities facilitates the design of ultra-compact demultiplexers and splitters.

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.3026-3034
• /
• 2021

Multi-target X-ray tube is a new type X-ray source, and can be applied in many fields such as sensitive X-ray fluorescence analysis and medical imaging. In this work, we report an electric field modulation multi-target X-ray tube, which contains four targets (Cr, Ni, Au, Mo) coated on a Beryllium (Be) window. A four-valve electric field deflector was developed to deflect the electron beam to bombard the corresponding targets. Particle dynamics analysis software was employed to simulate the particle tracking of electron beam. The results show that the 30 keV electron beam could get a 6.7 mm displacement on the target plane by 10⁵ V/m electric field. The focus areas are about 2 mm × 5 mm and 4 mm × 2.5 mm after deflection in two directions. Thermal behavior calculated by ANSYS shows that the designed target assembly could withstand a 10 W continuous power. The optimum target thicknesses and emission spectra were obtained by Geant4 when the thickness of Be window was 300 mm and the electron beam incident angle was 0.141 rad. The results indicate that this multi-target X-ray tube could provide different X-ray sources effectively.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3344-3351
• /
• 2021

The Rare Isotope Science Project was launched in 2011 in Korea toward constructing the Rare isotope Accelerator complex for ON line experiments (RAON). RAON will house several experimental systems, including the Muon Spin Rotation/Relaxation/Resonance (μSR) facility in High Energy Experimental Building B. This facility will use 600-MeV protons with a maximum current of 660 pμA and beam power of 400 kW. The key μSR features will facilitate projects related to condensed-matter and nuclear physics. Typical experiments require a few million surface muons fully spin-polarized opposite to their momentum for application to small samples. Here, we describe the design of a muon transport beam line for delivering the requisite muon numbers and the electromagnetic-component specifications in the μSR facility. We determine the beam-line configuration via beam-optics calculations and the transmission efficiency via single-particle tracking simulations. The electromagnet properties, including fringe field effects, are applied for each component in the calculations. The designed surface-muon beamline is 17.3 m long, consisting of 2 solenoids, 2 dipoles affording 70° deflection, 9 quadrupoles, and a Wien filter to eliminate contaminant positrons. The average incident-muon flux and spin rotation angle are estimated as 5.2 × 10⁶ μ⁺/s and 45°, respectively.

• Journal of Preventive Medicine and Public Health
• /
• 제54권4호
• /
• pp.230-237
• /
• 2021

Objectives: This study explored changes in individuals' behavior in response to social distancing (SD) levels and the "no gatherings of more than 5 people" (NGM5) rule in Korea during the coronavirus disease 2019 (COVID-19) pandemic. Methods: Using survey data from the COVID-19 Behavior Tracker, exploratory factor analysis extracted 3 preventive factors: maintenance of personal hygiene, avoiding going out, and avoiding meeting people. Each factor was used as a dependent variable. The chisquare test was used to compare differences in distributions between categorical variables, while binary logistic regression was performed to identify factors associated with high compliance with measures to prevent transmission. Results: In men, all 3 factors were significantly associated with lower compliance. Younger age groups were associated with lower compliance with maintenance of personal hygiene and avoiding meeting people. Employment status was significantly associated with avoiding going out and avoiding meeting people. Residence in the capital area was significantly associated with higher compliance with personal hygiene and avoiding venturing out. Increasing SD levels were associated with personal hygiene, avoiding going out, and avoiding meeting people. The NGM5 policy was not significantly associated with compliance. Conclusions: SD levels, gender, age, employment status, and region had explanatory power for compliance with non-pharmaceutical interventions (NPIs). Strengthening social campaigns to inspire voluntary compliance with NPIs, especially focused on men, younger people, full-time workers, and residents of the capital area is recommended. Simultaneously, efforts need to be made to segment SD measures into substrategies with detailed guidance at each level.

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.311-319
• /
• 2018

Purpose: The aim of this study is to develop a small combine for harvesting miscellaneous cereal crops. Methods: A prototype small combine was designed and constructed. Its specifications and basic performance were investigated. Results: The prototype small combine for harvesting miscellaneous cereal crops was designed and constructed to reflect similar specifications as those of the conventional combine. The prototype small combine comprises a diesel engine with the rated power/speed of 22.0 kW/2,600 rpm, three-stage primary and two-stage speed range transmission shifts, and a double acting threshing part. The maximum travel speeds of the prototype combine are approximately 0.72 m/s, 2.50 m/s, 0.30 m/s at the low, high speed range shifts in the forward direction, and while traversing in the reverse direction, respectively. The minimum radius of turning was approximately 1.50 m. In a static lateral overturning test, the prototype combine overturned neither to the right nor to left on a $30^{\circ}$ slope. The results of an oilseed rape harvesting test included the maximum operating speed of 0.32 m/s, the grain loss ratio of approximately 9.0%, and the effective field capacity of approximately 10.3 a/h. Additionally, among the outputs in grain outlet, the whole grains, damage grains, and materials other than grain (MOG) ratios accounted for 97.4%, 0.0%, and 2.6%, respectively. Conclusions: The prototype small combine for harvesting miscellaneous cereal crops indicates good driving ability and stability. The results of the oilseed rape harvesting test reveal that the harvesting performance must be enhanced such that the separating and cleaning parts are more suitable for each type of crop, thus reducing grain loss and foreign substances among the outputs in grain outlet. An improved small prototype combine could be used effectively to mechanize the harvesting of miscellaneous cereal crops in small family farms or semi-mountainous areas.

• 한국인터넷방송통신학회논문지
• /
• 제19권3호
• /
• pp.67-72
• /
• 2019

본 논문에서는 통신 채널에서 발생되는 찌그러짐의 영향을 최소화하기 위한 CCA 적응 등화 알고리즘에서 스텝 크기의 변화에 따른 성능을 해석하였다. CCA 알고리즘은 기존의 결정 지향 알고리즘 (DDA : Decision Directed Algorithm)과 축소 신호점 알고리즘 (RCA : Reduced Constellation Algorithm)의 적절한 결합 방식으로 송신 신호의 constant modulus와 결정 장치의 출력 신호를 compact slice 가중치만큼 고려하여 이들의 장점을 얻을 수 있다. 이 과정에서 compact slice 가중치를 고정시킨 후, 적응을 위한 알고리즘의 스텝 크기를 3가지로 변화시킬때의 성능을 컴퓨터 시뮬레이션을 통해 평가하였다. 시뮬레이션 결과 스텝 크기가 적을수록 수렴 속도는 늦지만 정상 상태 이후의 성능이 개선됨을 확인하였고, 특히 SER 성능에서는 스텝 크기가 적은 경우 robustness함을 알 수 있었다.

• Tribology and Lubricants
• /
• 제35권1호
• /
• pp.1-8
• /
• 2019

Demand for plastic gears are increasing in many industries due to their low production cost, light weight, applicability without lubricant, corrosion resistance and high resilience. Despite these benefits, utilizing plastic gears is limited due to their poor material properties. In this work, DLC coating was applied to improve the tribological properties of polyamide66 gear. 0 V, 40 V, and 70 V of negative bias voltages were selected as a deposition parameter in DC magnetron sputtering system. Pin-on-disk experiment was performed in order to investigate the wear characteristics of the gears. The results of the pin-on-disk experiment showed that DLC coated polyamide66 with 40 V of negative bias voltage had the lowest friction coefficient value (0.134) and DLC coated PA66 with 0 V of negative bias voltage showed the best wear resistance ($9.83{\times}10^{-10}mm^3/N{\cdot}mm$) among all the specimens. Based on these results, durability tests were conducted for DLC coated polyamide66 gears with 0 V of negative bias voltage. The tests showed that the temperature of the uncoated polyamide66 gear increased to about $37^{\circ}C$ while the DLC coated gear saturated at about $25^{\circ}C$. Also, the power transmission efficiency of the DLC coated gear increased by about 6% compared to those without coating. Weight loss of the polyamide66 gears were reduced by about 73%.

• 산업경영시스템학회지
• /
• 제41권4호
• /
• pp.22-33
• /
• 2018

Recently domestic manufacturing companies have been experiencing worsening profitability and stunted growth due to the long-term economic recession and the rapid rise of developing countries such as China and Southeast Asia. These difficulties force many companies to concentrate their core competencies on new value creation and innovation in order to gain momentum for new growth. Enterprise Resource Planning (ERP) has been considered as one of viable solutions. Among the various modules in ERP, shop floor control function in the production management module is rather limited. In order to overcome this problem, Manufacturing Execution System (MES) has been used as a subsystem which has a strong information gathering power and flexibility. Both systems interact closely with each other. In particular, ERP requires fast, accurate shop floor information at MES. This paper describes how to synchronize relevant information between ERP and MES with theory of constraints (TOC). The processing time information transmitted from the MES workplace is received at the ERP workplace. In the process, the received processing time is causing information distortion in ERP, when the information gathering standard of MES is different from the ERP information interpretation standard. The Drum-Buffer-Rope theory of TOC was applied to resolve this problem, therefore, information synchronization between both systems was made. As a precondition, the standard time of the upper ERP system was rearranged according to the capacity constraints resource. As a result, standard time restructuring has affected changes in labor costs. Standard labor costs have come close to actual ones, and information synchronization of MES transmission data has improved the reliability of standard product costs, such that it enabled various company-wide restructuring actions to be much more effective.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제8권8호
• /
• pp.201-208
• /
• 2019

인체 통신은 인체를 매질로 통신하는 기술로, BAN (Body-Area Network) 환경에서, 무선 통신에 비해 신호 감쇠 측면에서 큰 이점이 있어 배터리로 동작하는 웨어러블 기기 간 통신 시 저전력 통신을 지원할 수 있다. 하지만, 인체 통신은 그 이점에 비해 안전성 등의 문제가 있어 채널 특성에 대한 연구가 미비하였다. 이에 본 논문은 인체 채널 특성에 있어 통신 성능에 영향을 주는 MAC 파라미터를 제시하고, 이를 이용한 새로운 인체 통신 용 MAC 프로토콜을 제안하고, 또한, 각기 다른 가드 인터벌을 설정하여 성능을 분석하였다. 결과로, IEEE 802.15.6 표준 기반 Slotted aloha 프로토콜에 비해 약 300kbps의 Goodput 이득을 가졌으며, Duty cycle 또한 약 7.07%로, 표준의 최소 duty cycle이 약 5%이지만, Goodput을 고려했을 때, 인정할 수 있는 성능이라 볼 수 있다.