• 한국군사과학기술학회지
• /
• 제6권2호
• /
• pp.55-64
• /
• 2003

Underwater acoustic noise measurement is an essential element for vulnerability assessment of modern naval platforms. But during the last few decades environmental conditions have drastically changed due to the gradually increasing sea ambient noise level and decreasing submarine radiated noise level. A real-time underwater acoustic measurement system with vertical line array is designed for the quiet submarine radiated noise assessment in challenging environment. This system has a constant directivity index in measurement frequency range and accurate tracking capability for the transmission loss compensation and navigation aids inside the submarine. This system has been validated at sea and used several times for the submarine noise measurement.

• 한국통신학회논문지
• /
• 제33권12A호
• /
• pp.1251-1260
• /
• 2008

Diffuse wireless optical communication offers more robust optical links in terms of coverage and shadowing than line-of-sight links. However, traditional diffuse wireless infrared (IR) transceiver systems are more susceptible to multi-path distortion and great power decrease, which results in limiting high-speed performance. Multi-beam is an effective technique to compensate for multi-path distortion in a wireless infrared environment. The goal of this paper is to analyze the transmission characteristics by replacing traditional diffuse system (TDS) which contains single wide angle transmitter and single element receiver by system consisting of three-beam transmitter and non-imaging receiver (TNS) attached with compound parabolic concentrator (CPC). In the simulation, we use the recursive model developed by Barry and Kahn and build the scenario based on 10 different cases which have been listed in Table 1. Moreover, we also check the reliability of the TNS diffuse link channel by BER test on the basis of different receiver positions and room sizes. The simulation results not only show the basic transmission characteristics of TNS diffuse link, but also are references to design more efficient and reliable indoor infrared transmission systems.

• 대한전자공학회논문지
• /
• 제9권4호
• /
• pp.1-6
• /
• 1972

본초광대역AMqus조기는 회로구성요소에 초광대역 AM변조작용을 제한하는 동조회로를 사용하지 않고 전송선의 임피단스변환성을 이용하여, 인가한 변조신호의 진폭에 비례되게 반송파의 진폭이 변하도록 하는 변조원리를 이용한 것이다. 본논문에서는 이 AM변조기를 해석연구 하였으며 또 본변조기의 Active 소자로서 VHF 진실관, FET, VVC 다이오우드를 각각 사용하여 실험하여 얻은 AM변조파형의 사진도 첨가하였다.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 1997년도 추계학술발표회 논문집
• /
• pp.14-19
• /
• 1997

A numerical method for determining the temperature vartiation in a natural gas transmission line is presented. By considering an element of the gas pipeline and assuming radially lumped heat transfer at steady-state conditions, the energy equation is developed. The integration of the developed nonlinear differential equation is done numerically using the fourth order Runge-Kutta scheme. The results of the present study have been compared with the results of Coulter equations, and show a fairly good agreement.

• 대한전자공학회논문지
• /
• 제23권2호
• /
• pp.182-188
• /
• 1986

A method of wideband constant phase control is proposed. This can be applied to reflection type phase shifter with p-i-n diode. Using the proposed method, a microwave phase network which consists of a transmission line and reactive circuit element is suggested. By determining theproper values of design parameters, the desired wideband constant phase with different specification can easily be designed. Also, using the proposed method, the parameters variation, and 1.1 dB of insertion loss in the range of 12% bandwidth.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1070-1072
• /
• 2003

In this paper, Firstly, it is shown that the high vibration source of piping system is the pulsation transmission of pipe line element ,such as, orifice plate, valves and the control valve is a broad band source and the branch wall and the cavity have vortex frequency Secondly, in order to decrese the turbulence vibration of piping system, the practical analysis of piping flow by EFD have been developed and its effectiveness is investigated as applying it at piping system practically.

• 한국전자파학회논문지
• /
• 제10권7호
• /
• pp.973-984
• /
• 1999

본 논문에서는 이동통신 기지국용 안테나로 널리 사용되고 있는 슬리브 다이폴 배열 안테나에 대해 모멘트 법과 전송선로 이론을 결합하여 해석하였으며 그 특성을 고찰하였다. 모벤트 법으로 해석함에 있어서 전류가 슬리브 다이폴 소자뿐만 아니라 동축선로에도 흐르므로 두 부분 모두에 대하여 해석하였으며, 각 슬리브 다이폴 소자에 급전되는 전압은 슬리브 다이폴 배열 안테나가 동축선로에 의해 직렬로 급전되는 구조이므로 급전동축선로를 전송선로로 등가화하여 전송선로 이론으로부터 구하였다. 또한 구조에 의한 동축선로와 슬리브 개방단 사이의 직렬 리액턴스를 안테나에 임피던스가 부하(Loading )되는 것으로 고려하였다. 수치해 석을 통해 슬리브 다이폴 소자의 급전간격이나 주파수의 변화에 따른 복사패턴과 전류분포를 고찰하였다. 해석방법의 타당성을 검증하기 위해 한 파장 간격으로 배열된 4소자 슬리브 다이폴 배열 안테나를 제작하고 복 사패턴을 측정하여 수치해석결과와 비교하였다. 측정결과는 수치해석결과와 거의 일치함을 확인할 수 있었다.

• 한국전자파학회논문지
• /
• 제21권2호
• /
• pp.188-193
• /
• 2010

본 논문은 관통형 비아와 전송 선로 사이의 임피던스 불연속과 P/G(Power/Ground) 면 사이에서 발생되는 공진으로 인한 클록 신호 응답 성능 저하가 관통형 비아(through-hole via)가 있는 4층 PCB(Printed Circuit Boards)의 SI(Signal Integrity) 성능에 악영향을 미치는 것을 이론적으로 분석하였다. 비아 구조의 집중소자 모델링을 이용한 반사 전압 계산과 TDR(Time Domain Reflector) 시뮬레이션 결과 비교로 관통형 비아와 전송 선로 사이의 임피던스 불연속 최소화 시킬 수 있고, 관통형 비아 위치를 이용한 P/G면 공진 상쇄의 시뮬레이션 결과로 클록 신호 응답 성능을 향상시킬 수 있음을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1555-1557
• /
• 1998

In order to investigate the core material for over-head transmission line with non-magnetic and high strength nitrogen steel, microstructure and several basic properties of Fe-Mn-Cr-Ni-N steel have been studied. It is necessary that core material have a $\gamma$ phase to have a non-magnetic characteristics. To acquire a $\gamma$ phase, Mn, Ni and C are added as a alloying element. It was found that Fe-25Mn-16Cr-1Ni-N alloy have a stable $\gamma$ phase. The precipitate from this alloy system was $(Cr, Fe)_7C_3$. High Mn and N steel satisfies Sievert's relation that solubility of nitrogen increases with the square root of partial pressure of gas in metal-gas system and the hardness have proportional relation with nitrogen concentration.

• 한국통신학회논문지
• /
• 제22권5호
• /
• pp.981-989
• /
• 1997

In this paper, the 5-element active phased array antennas coupled through slotline between elements are designed and fabricated. A recent studies on the active phased array antennas using the transmission line coupling which can be designed to provide strong coupling and the appropriate coupling phase. But this sturucture has limitation of expanding in two dimensions for planar active phased array antennas and distortion of the radiation pattern caused by coupling network. Thus our work proposes the slotline coupling structure asthe broadband coupling network for the active phased array antenna. In experiment, 5-elements active phased array antenas have steering range from -30.deg. to 20.deg. off broadside as the free-running frequencies of end elements are controlled. The overall results show that the proposed slotline coupling structure is suited for the coupling network in the actie phased array antenna system. And the proposed coupling structire solves the expansion problem and eliminates the distortion of the radiation pattern caused by the spurious radiation of the transmission line coupling network. Thus thiscan be expanded to two dimensional coupling network for the planar active phased array antenna system.