• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.3
• /
• pp.295-306
• /
• 2003

Recently efforts are underway to analyze the impacts of anthropogenic $CO_2$ on the global environments and the amount of oceanic uptake increase. The East Sea is now viewed as a miniature ocean because its circulation pattern is similar to the ocean conveyer belt. The biological pump of the East Sea is a vital component to understand the carbon cycle quantitatively. In this paper, the biological pump is estimated utilizing the stoichiometric ratio between carbon and phosphorus. A simple phosphate budget model is constructed based on the seawater and dissolved oxygen box model that can simulate the recent structural change in deep water circulation of the East Sea. A model run from you 1952 to 2040 shows the steadily intensifying biological pump. Currently it exports about 0.016 Pg C yr$^{-1}$ , which corresponds to 35％ of the carbon introduced into the seawater by the air-sea exchange. An increased oxygen supply to the central water mass as a result of from the transition in the ventilation system might enhance the remineralization of sinking biogenic particles. This should strengthen the upward nutrient flux into the surface layer. Consequently, the biological sequestration of anthropogenic carbon is expected to increase with time. The estimated biological uptake of the anthropogenic carbon in the East Sea since the Industrial Revolution is estimated as 0.025 Pg C.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.502-507
• /
• 2013

In this paper, a circular dual mode horn with modified aperture is proposed to improve a E/H-plane radiation pattern symmetry of a conventional oversized circular dual mode horn. The proposed antenna consists of a feeding section, a mode generation section and a phase matching section which has aperture shape transition from circle to ellipse or rectangle to improve a E/H-plane radiation pattern symmetry. To compare the performances between the proposed antenna and the convenional circular dual mode horn, the conventional circular dual mode horn and the proposed circular dual mode horn with rectangular aperture are fabricated and researched at 15 GHz. The measured results show that the conventional circular dual mode horn has 3.394 dB difference while the proposed antenna has only 0.539 dB difference between E and H-plane radiation patterns within the -11 dB beamwidth($53^{\circ}$) which is required beamwidth of the feed horn for the maximum aperture efficiency where f/d ratio of reflector antenna is 1.

• Economic and Environmental Geology
• /
• v.31 no.1
• /
• pp.21-29
• /
• 1998

Broadband receiver functions are developed from teleseismic P waveforms recorded at Wonju (KSRS), Inchon (IRIS), and Pohang (PHN), and are analyzed to examine the crustal structure beneath the three stations. The teleseismic receiver functions are inverted in the time domain to the vertical P wave velocity structure beneath the stations. Clear P-to-S converted phases from the Moho interface are observed in teleseismic seismograms recorded at the three stations. We estimated the crustal velocity structures beneath the stations using the receiver function inversion. The general features of inversion results are as follows: (1) For Pohang station, there is a high velocity gradient at a 4~5 km deep for SE and NW back azimuth and a low velocity zone at around 10 km deep. The Moho depth is 28 km for NW direction. (2) The shallow crustal structure beneath Wonju station is somewhat complex and there is a high-velocity zone ($V_p{\simeq}6.8km/sec$) at 3 to 4 km deep. The average crustal thickness is 33 km, and a transition zone exists at a 30~33 km deep of lower crust, of which velocity is abruptly changed 6.4 to 7.9 km/sec. (3) For Inchon station, the crustal velocity gradient monotonously increases up to the Moho discontinuity and the velocity is abruptly changed from 6.2 km/sec to 7.9 km/sec at 29 km deep.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.33-47
• /
• 1982

To modernize the conventional rice post production technology and reduce grain losses, a transition toward the wet-paddy threshing system has been strongly demanded. The head-feeding type thresher with pneumatic separation has been used dominantly for threshing dried-paddy, but some adverse effects in separation performance for threshing wet-paddy is encounterred. In order to solve the problems, the development of thresher with an additional oscillating sieve to the conventional pneumatic separation has been recommanded. This study was intended to evaluate the separating performance of thresher with oscillating sieve which was attached additionally to the conventional auto-thresher equipped with separation system of blower and suction fan. For different feed rates and rice varieties, wet-and dry-material were tested with threshers attached with and without oscillating sieve. Results of the study are summarized as follows: 1. When the feed rates were 480 and 640 kg/hr, there was no statistically significant difference in power reqirements between the threshers with and without an additional sieve device for both dry-and wet-threshing. However, when the feed rate was 960 kg/hr, power requirements of thresher without sieve were greater for wet-paddy threshing than the thresher with the additional sieve separator by about 20% points. 2. With additional oscillating sieve device, the ratios of total weights of whole grains including grains with branch let and damaged grains to the total output did not show statistical difference among the feed rates. However, with pneumatic separation the ratio was decreased as the level of feed rate increased. 3. The total amount of grains with branchlet (including broken panicle) increased with the moisture content. For both the wet-and dry-material threshing with the additional oscillating sieve, the percent of grains with branchlet to the total output decreased greatly as the feed rate increased. 4. The output of the damaged grains increased as moisture content decreased. Especially, for the dry-paddy threshing, the additional sieve separating device produced more damaged grains than the pneumatic separation at all feed rates. 5. Generally, for dry paddy threshing, the separating performance of the thresher with the additional sieve device was better at all feed rates, showing greater difference with increasing feed rates. 6. Separating losses were greater with the pneumatic than sieve separation for both the wet-and dry-threshing. 7. The overall comparison of separating performance of threshers tested with and without an additional sieve device showed that the former was more effective than the latter for the dry-material threshing. However, for the wet-paddy threshing, the separation performance with a sieve device was better than the pneumatic only when the feed rate was high.

• Journal of Environmental Impact Assessment
• /
• v.24 no.1
• /
• pp.51-65
• /
• 2015

The flora distributed around Mt. Hwangseok were summarized as 495 taxa including 97 families, 295 genera, 394 species, 4 subspecies, 80 varieties and 17 forms. In the component ratio of taxa, pteridophyta was 4.2%, 1.2% of gymnospermae, 78.8% of dicotyledonae and 15.8% of monocotyledonae. The rare plants were 9 taxa including Aconitum chiisanense, Eranthis stellata, Aristolochia contorta, Viola albida and so forth. The Korean endemic plants were 13 taxa including Populus tomentiglandulos, Pseudostellaria coreana, Aconitum pseudolaeve, Thalictrum actaefolium var. brevistylum and so forth. The specific plants by floristic region were 16 taxa including Cimicifuga heracleifolia, Sanguisorba longifolia, Symplocarpus renifolius, Betula davurica and so forth. The plants adaptable to climate change were 11 taxa including Aconitum pseudolaeve, Ajuga spectabilis, Carex okamotoi, Rhynchosia volubilis and so forth. The naturalized plants were 20 taxa including Fallopia convolvulus, Rumex crispus, Phytolacca amrericana, Robinia pseudoacacia and so forth. The invasive alien plant was Aster pilosus. The emergence of local ecologically important species, set the correct range for the core and buffer zone, transition zone, coded will be necessary, the distribution of the specialty plant areas and rare plants, an area management plan should be organized by nature. In addition, a variety of assessment techniques and accurate data to establish the validity of the core area is also set to acquire.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.286-293
• /
• 1998

Two methods were used to enhance the adsorption capacity of activated carbons. One is to impregnate activated carbons with chemical compounds which have a good affinity for $CO_2$. The other is to activate by heat-treating after impregnation with KOH on activated carbons(AC). The chemical compounds impregnated on AC were alkali metal, alkaline earth metal, and transition metal chlorides. The adsorption capacity of $CO_2$ on AC impregnated with these metals was less than that of pure AC. These compounds have not the chemical affinity for $CO_2$ and obstruct the micropore of AC. The experiment of breakthrough for $CO_2$ on AC impregnated with KOH showed the increase of the adsorbed amount of $CO_2$ in influent gases containing water vapor. This means that KOH adsorbes $CO_2$ gas. However, the adsorbents impregnated with KOH had not the reproducibility because of the production of $K_2CO_3$ by the reaction of KOH with $CO_2$. The amount of $CO_2$ adsorbed on the heat-treated AC at $800^{\circ}C$ increased with the amount of impregnation. The adsorption capacity of $CO_2$ was the largest when the ratio of weight of KOH to AC equal to 4. The isosteric heat of adsorption was calculated by the equation of Clausius-Clapeyron form adsorption capacity data of $CO_2$ for the temperature change. In addition, the characteristics of $CO_2$ breakthrough curve were surveyed for the change of flow rate and concentration.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.6
• /
• pp.25-40
• /
• 2015

Korean tourist areas are designated/managed in accordance with the Tourism Promotion Act. Since Taejongdae was designated as a tourist area in 1969, a total of 230 tourist areas have been designated/built/operated. It has been 46 years since the first tourist area was designated. According to the Tourism Area Life Cycle by Butler, it is estimated that the flow of the life cycle will be reflected in ups and downs over time. Thus, this study aimed to provide basic data for suggesting the direction of changes and development of the future tourist areas after analyzing the life cycle stage of domestic tourist areas, by applying the Tourism Area Life Cycle by Butler. The research method was based on the tourist areas by year, the number of visitors, and data of the target to derive the change transition curve, obtained by dividing the life cycle stages of the tourist areas based on the visitor rate of change. In the analysis results, more than 1/3 of domestic tourist areas are reaching the stagnation/decline stage, and tourist areas such as hot springs and seaside/beach resources show a particularly high ratio of stagnation/decline. The tourist areas that already have reached the stagnation/decline stage will need to analyze the causes for the decline, seek for resolution measures, and introduce new innovative elements. Even though the results of this study are not sufficient to be used as an absolute standard to decide the life cycle stage of domestic tourist areas, it is considered to be adequate for phenomenologically understanding the life cycle stage of Korean tourist areas. Based on this study, the causes for the stagnation/decline of tourist areas can be revealed while it can be also used as basic research to establish revitalization measures for tourist areas by introducing new innovation.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.2
• /
• pp.142-149
• /
• 2012

This study deals with the investigation of the scale effect for the vertical-axis tidal stream turbine by evaluating the hydrodynamic efficiency of turbine rotors of different diameters at different flow conditions. Numerical analyses are made for the turbine rotors with a same shape, but different sizes obtained using the diameter evaluation equation suggested in this paper. It is shown that the performance of turbine is clearly dependent upon the rotor size and inflow velocity, i.e. Reynolds number dependency of different-scaled turbines showing better efficiency with increasing Reynolds number. The sudden decrease of efficiency is also noticed around the transition region of Reynolds number. The hydrodynamic capacity evaluation method needed at initial stage of turbine design is suggested and exercised with some test cases. It is recommended that the method is expected to be useful for turbines with demanding powers between 10 kW and 300 kW.

• Korean Journal of Materials Research
• /
• v.21 no.4
• /
• pp.216-219
• /
• 2011

Perovskite manganites such as $RE_{1-x}A_xMnO_3$ (RE = rare earth, A = Ca, Sr, Ba) have been the subject of intense research in the last few years, ever since the discovery that these systems demonstrate colossal magnetoresistance (CMR). The CMR is usually explained with the double-exchange (DE) mechanism, and CMR materials have potential applications for magnetic switching, recording devices, and more. However, the intrinsic CMR effect is usually found under the conditions of a magnetic field of several Teslas and a narrow temperature range near the Curie temperature ($T_c$). This magnetic field and temperature range make practical applications impossible. Recently, another type of MR, called the low-field magnetoresistance(LFMR), has also been a research focus. This MR is typically found in polycrystalline half-metallic ferromagnets, and is associated with the spin-dependent charge transport across grain boundaries. Composites with compositions $La_{0.7}(Ca_{1-x}Sr_x)_{0.3}MnO_3)]_{0.99}/(BaTiO_3)_{0.01}$ $[(LCSMO)_{0.99}/(BTO)_{0.01}]$were prepared with different Sr doping levels x by a standard ceramic technique, and their electrical transport and magnetoresistance (MR) properties were investigated. The structure and morphology of the composites were studied by X-ray diffraction (XRD) and scanning electronic microscopy (SEM). BTO peaks could not be found in the XRD pattern because the amount of BTO in the composites was too small. As the content of x decreased, the crystal structure changed from orthorhombic to rhombohedral. This change can be explained by the fact that the crystal structure of pure LCMO is orthorhombic and the crystal structure of pure LSMO is rhombohedral. The SEM results indicate that LCSMO and BTO coexist in the composites and BTO mostly segregates at the grain boundaries of LCSMO, which are in accordance with the results of the magnetic measurements. The resistivity of all the composites was measured in the range of 90-400K at 0T, 0.5T magnetic field. The result indicates that the MR of the composites increases systematically as the Ca concentration increases, although the transition temperature $T_c$ shifts to a lower range.

• Journal of Korea Foresty Energy
• /
• v.25 no.2
• /
• pp.9-15
• /
• 2006

The quality of wood is largely depend on the characteristics of xylem tissue and their variation. They may include tracheid length, microfibril angle, distribution and amount of resin canal, as well as specific gravity as indicator of material properties. In this study, variation of these elements between and within 30 superior families of Pinus densifloa in progeny test forest were examined and the results are as follows; In terms of elongation ratio of tracheid length which is less than 1%, the sample tree showed a transition to matured wood after 13 years particularly in Kangwon 25, 30, 90, 56 and Chungnam 4 families. The average specific gravity were from 0.35 to 0.49, and differences between the families were significant. Number of transverse resin canal per unit area were also found to be significant between the families. The microfibril angles measured at 15th ring number ranged from 0.9 degree to 28.6 degree. More studies are necessary to tell whether these variation is inherited by genetic or individual characteristic. However it would be desirable that these elements be considered as key elements in the early stage of selection process of superior tree to ensure good quality of wood production in future.