• 한국디지털건축인테리어학회논문집
• /
• 제2권1호
• /
• pp.24-31
• /
• 2002

The purpose of this study was to analyze the transition on architectural data such as valid indoor length, module, ratio of core, floor height, ceiling height and the type of structured cabling system according to the intelligent building grade through case study of the intelligent office buildings constructed in Korea since 1980. The results of this study were as follows. The average floor height was 3.80m, and it was higher in proportion to the IB grade. The average ceiling height was 2.57m, and it didn't have connection with the IB grade. The module of high frequency in application was $3.0{\times}3.0m$, and it showed 25% in the application frequency. The average valid indoor length was 12.27m. The average ratio of core was 24.49%. The type of high frequency in application for the structured cabling was Access Floor Type, and it showed 31% in the application frequency.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2007년도 추계학술대회
• /
• pp.123-127
• /
• 2007

The effect of axial slit wall of outer cylinder on Taylor-Couette flow was experimentally investigated. The axial slits were azimuthally located along the inner wall of outer cylinder and the number of slits was 6, 9 and 18. The radius ratio and aspect ratio of the experimental models was 0.825 and 48, respectively. We used PIV method to measure the flow field and applied refractive index matching method to resolve the image distortion due to the complex model geometry. The results showed the effect of slit on the flow transition is increased as the number of slit increased. When the model has 6 slits, there were hardly the effect of axial slit wall and the flow transition happened at the same Reynolds number of plain smooth wall model case.

• 대한기계학회논문집B
• /
• 제31권10호
• /
• pp.889-894
• /
• 2007

The effect of the axial slit of outer cylinder on Taylor-Couette flow was experimentally investigated. The radius ratio and aspect ratio of the model was 0.825 and 48, respectively. The depth of slits was 5mm and total 18 slits were azimuthally located along the inner wall of outer cylinder. We used PIV method to measure the flow field and applied refractive index matching method to resolve the image distortion due to the complex model geometry. The results showed the axial slit did not affect the transition from laminar Couette flow to Taylor vortex. The effect of slit wall appeared when the Reynolds number is larger than Re=143 and the slit model shows the transition to turbulent Taylor vortex flow above Re=143.

• 한국전기전자재료학회논문지
• /
• 제26권1호
• /
• pp.33-37
• /
• 2013

The properties of LTCC green sheets formed by the MLS-22 powder of NEG Inc. were investigated for acrylic binders with different PVB and Tg in the variation of temperature. The elongation of the green sheets showed large variation depending on the temperature, and was rapidly decreased near the Tg of the sheets. With the increase of the ratio of plasticizer/binder (P/B), large elongation of the sheets was observed due to the decrease of the Tg. In the stacking process of the multilayer ceramic, the optimal control of the temperature is highly required depending on the Tg of the binder and the ratio of P/Buniform coating.

• 대한기계학회논문집B
• /
• 제32권5호
• /
• pp.382-391
• /
• 2008

A simple analytical model of rarefied channel flow is developed to predict the compression ratio in a helical drag pump. If the surface velocity is zero, the model reduces to a capillary leaks. Predictions of our model agree well with the Knudsen's data for capillary leaks in transition flow, in addition to giving a good account of the Knudsen minimum. Also, the present results are compared with experimental data, and good agreement is obtained over the entire pressure range from molecular to slip flow.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2006년도 High Temperature Superconductivity Vol.XVI
• /
• pp.26-26
• /
• 2006

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2005년도 High Temperature Superconductivity Vol.XV
• /
• pp.17-17
• /
• 2005

• 한국철도학회논문집
• /
• 제15권1호
• /
• pp.48-61
• /
• 2012

열차 진동 저감을 위한 플로팅 슬래브궤도의 설계에 있어서 주행 안전, 승차감 및 사용성을 확보하는 것이 매우 중요하다. 본 연구에서는 플로팅 슬래브궤도에서 열차 주행안전과 승차감, 사용성 확보를 위한 요구조건을 분석하여 제시하였고, 열차-궤도 상호작용을 고려한 동적 해석기법을 적용하여 시스템 고유진동수, 스프링 지지간격 및 배치방법, 감쇠비 등 주요 시스템 설계변수에 따라 일반 콘크리트궤도와의 접속구간을 포함한 플로팅 슬래브궤도 구간에서의 열차 및 궤도의 동적 거동을 분석하였다. 연구결과에 따르면 일반 궤도와 플로팅슬래브궤도 간의 접속구간에서의 지지강성의 차이에 의해 윤중 변동율, 레일 응력, 레일 인상력 등의 동적 응답이 크게 증가하는 것으로 나타났으며, 따라서 접속구간에서 스프링 지지간격을 좁히거나 스프링 강성의 차이를 완화시키는 방안이 주행안전과 궤도 사용성 확보를 위해 효과적인 것으로 나타났다. 한편 차체 가속도로 평가하는 승차감은 접속구간에서의 지지강성의 차이에 의해서는 거의 영향을 받지 않고, 시스템 튜닝 주파수에 의해 가장 큰 영향을 받는 것으로 나타났으며, 승차감 확보를 위해서는 적절한 시스템 튜닝 주파수를 선정하는 것이 매우 중요한 것으로 나타났다. 이 밖에 감쇠비, 스프링 간격, 열차속도에 따른 영향을 분석하였다.

• Journal of Ceramic Processing Research
• /
• 제20권5호
• /
• pp.484-489
• /
• 2019

VO2 is an attractive candidate as a transition metal oxide switching material as a selection device for reduction of sneak-path current. We demonstrate deposition of nanoscale VO2 thin films via thermal atomic layer deposition (ALD) with H2O reactant. Using this method, we demonstrate VO2 thin films with high-quality characteristics, including crystallinity, reproducibility using X-ray diffraction, and X-ray photoelectron spectroscopy measurement. We also present a method that can increase uniformity and thin film quality by splitting the pulse cycle into two using scanning electron microscope measurement. We demonstrate an ON / OFF ratio of about 40, which is caused by metal insulator transition (MIT) of VO2 thin film. ALD-deposited VO2 films with high film uniformity can be applied to next-generation nonvolatile memory devices with high density due to their metal-insulator transition characteristic with high current density, fast switching speed, and high ON / OFF ratio.

• Elastomers and Composites
• /
• 제39권2호
• /
• pp.95-104
• /
• 2004

방진고무의 내한성을 향상시키기 위하여 NR 컴파운드에 유리전이온도가 상대적으로 낮은 BR을 섞거나 오일 함량을 늘리는 방법을 이용하여 새로운 컴파운드를 제작하였다. 저온환경에서 기계적물성 실험을 수행하여 NR/BR 조성비 및 오일 함량에 따른 영향을 조사하였다. BR 함량이 증가할수록 경도 및 모듈러스가 증가한 반면 인장강도 및 신율은 감소하였고, 오일 함량이 많을수록 경도, 모듈러스 및 인장강도는 감소하였으나 신율은 거의 변화가 없었다. NR/BR 블렌드 고무컴파운드는 NR과 BR의 유리 전이 온도인 $-50^{\circ}C$와 $-90^{\circ}C$에서 저장탄성계수의 급격한 전이와 손실계수인 tan ${\delta}$가 최대값을 보여 두 컴파운드간의 비상용성을 나타내었다.