• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2004.06a
• /
• pp.258-265
• /
• 2004

Numerous genes of Escherichia coli have been shown to growth phase-dependent expression throughout growth. The global patterns of growth phase-dependent gene expression of E. coli throughout growth using oligonucleotide microarrays containing a nearly complete set of 4,289 annotated open reading frames. To determine the change of gene expression throughout growth, we compared RNAs taken from timecourses with common reference RNA, which is combined with equal amount of RNA pooled from each time point. The hierarchical clustering of the conditions in accordance with timecourse expression revealed that growth phases were clustered into four classes, consistent with known physiological growth status. We analyzed the differences of expression levels at genome level in both exponential and stationary growth phase cultures. Statistical analysis showed that 213 genes are shown to, growth phase-dependent expression. We also analyzed the expression of 256 known operons and 208 regulatory genes. To assess the global impact of RpoS, we identified 193 genes coregulated with rpoS and their expression levels were examined in the isogenic rpoS mutant. The results revealed that 99 of 193 were novel RpoS-dependent stationary phase-induced genes and the majority of those are functionally unknown. Our data provide that global changes and adjustments of gene expression are coordinately regulated by growth transition in E. coli.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.1
• /
• pp.78-86
• /
• 1995

Abstract We have investigated the structure and the conductivity of the CdTe films evaporated on the glass substrates by Electron Beam Evaporator (EBE) technique. The structure is observed to be polycrystalline whose phase is mainly hexagonal phase with some cubic phase. Dark electric conductivity is of the order of $1-^{-8} {\Omega}^{-1} cm^{-1}$ and slightly increased by annealing for an hour at $300^{\circ}C$. Activation energy calculated from the electrical conductivity which varies with increasing temperature is 1.446 eV in the case of room temperature substrates. The values of optical band gap are 1.52 eV in direct transition whereas 1.44 eV in indirect. The photoconductivity of the films is of the order of $1-^{-8} {\Omega}^{-1} cm^{-1}$ and the peak energy is about 600 nm in the room temperature. The photoconductivity starts to increase at 850 nm, which is close to 1.446 eV, the activation energy of CdTe polycrystal films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.54-54
• /
• 2010

This article reports a spontaneous method for controlling the growth mode from vertically arrayed ultra-slim MgZnO nanowires to nanowalls through the Zn random motion of seeds formed by surface phase separation by Mg injection near an evaporation temperature of Zn. The random motion of single crystal MgZnO seeds with relative Zn rich phase played a vital role in the growth of the MgZnO nanowalls. The seeds were networked with increasing Zn flux compared with Mg flux and closing to the evaporation temperature of Zn on phase separation layers. We achieved fabrication of MgZnO nanowalls on various non- and conducting substrates by this advanced growth method. The MgZnO nanowalls hydrogen sensor showed an improved sensing performance compared to the MgZnO nanowires grown under the similar conditions. Based on the microstructural characterizations, the growth procedure and models for the evolution of the structure transition from MgZnO nanowires to nanowalls on the Si substrates are proposed for phased growth times.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.103-105
• /
• 1998

Asymmetric polymeric membranes prepared by the phase transition technique usually have either a top layer consisting of closely packed nodules or pores dispersed throughout the membrane surfaces. In this study, we present AFM image of a polysulfone membrane which show a clear evidence for the nodular structure and porous structure resulted from different phase separation mechanisms; spinodal decomposition and nucleation and growth. The surface morphology obtained by SEM and AFM was also compared.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.6
• /
• pp.786-798
• /
• 2001

This paper describes the phenomena of wake-induced transition of the boundary layers on a NACA0012 airfoil using measured phase-averaged data. Especially, the phase-averaged wall shear stresses are reasonably evaluated using the principle of Computational Preston Tube Method. Due to the passing wake, the turbulent patch is generated in the laminar boundary layer on the airfoil and the boundary layer becomes temporarily transitional. The patches propagate downstream with less speed than free-stream velocity and merge with each other at further down stream station, and the boundary layer becomes more transitional. The generation of turbulent patch at the leading edge of the airfoil mainly depends on velocity defects and turbulent intensity profiles of passing wakes. However, the growth and merging of turbulent patches depend on local streamwise pressure gradients as well as characteristics of turbulent patches. In this transition process, the present experimental data show very similar features to the previous numerical and experimental studies. It is confirmed that the two phase-averaged mean velocity dips appear in the outer region of transitional boundary layer for each passing cycle. Relatively high values of the phase-averaged turbulent fluctuations in the outer region indicate the possibility that breakdown occurs in the outer layer not near the wall.

• Journal of Ocean Engineering and Technology
• /
• v.1 no.2
• /
• pp.101-112
• /
• 1987

Fracture toughness characterization in the transition region is examined for heat-treated and ionnitrided Ni-Cr-Mo steel. After heat treatment for the specimens of Ni-Cr-Mo steel, organizations of specimens-specimens which are heat-treated and ion-nitrided for 4 hours at 500 .deg. C and 5 torr in 25%N/dub 2/-75%H/sub 2/mixed gas-, hardness variety, and X-ray diffraction pattern of the ion-nitriding compound layer are observed. Fracture toughenss test of unloading compliance method were conducted over the regions from room trmperature to -70.deg. C. The compound layer was consisted of r'=Fe/sub 4/N phase and ion-nitrided layer's depth was 200mm from surface. The transition regions of heat-treated and ion-nitrided specimens were about -30.deg. C and -50.deg. C, respectively. The transition region of ion-nitrided specimens is estimated less than that of heat-treated one, and this is the effect of ion-nitriding.

• Environmental and Resource Economics Review
• /
• v.29 no.3
• /
• pp.389-418
• /
• 2020

Some OECD countries are showing signs of decoupling in the transportation sector. In terms of sustainable development, the decoupling of economic activities and greenhouse gas emissions in the transportation sector is very important. This study calculated a decoupling index of greenhouse gas emissions in the transportation sector for 25 OECD countries. Also this study analyzed the impact of energy transition on decoupling regimes. According to the analysis, a considerable number of countries have reached the decoupling phase, and some countries have shown strong decoupling regime in which greenhouse gas emissions are reduced despite economic growth. From ordered panel logit analysis, energy transition had significant impact on achieving decoupling phase. Electrification of transport had a positive effect on the decoupling, while the gasification was not significant. In addition, small traffic, high urbanization rates, strong environmental policies, and high trade opening have had significant effects on achieving decoupling.

• Journal of the Korean Ceramic Society
• /
• v.28 no.2
• /
• pp.160-166
• /
• 1991

Microstructure and phase changes during the sintering of ZnO varistors were studied in ZnO-Bi2O3-CoO-Sb2O3 and ZnO-Bi2O3-CoO-Sb2O3-Cr2O3 systems using acanning electron microscopy (SEM) with an energy dispersive X-ray analysis (EDAX), X-ray diffraction (XRD) and differential thermal analysis (DTA). The spinel phase and the Bi2O3 phase were formed by the decomposition of the pyrochlore phase during heating. The spinel particles (2-4$\mu\textrm{m}$), which were formed both along ther grain boundaries and within the ZnO grain, were always found near the pyrochlore phase. Intergranular phases (Bi2O3 and pyrochlore) were precipitated from the liquid phase during cooling. The Bi2O3 phases were located at the triple (or multiple) point of the ZnO grains. Cr2O3 played a role in decreasing the formation temperature of the spinel phase and Bi2O3 phase during sintering, and inhibited the grain growth.

• Korean Journal of Materials Research
• /
• v.14 no.11
• /
• pp.821-827
• /
• 2004

Titanium oxide thin films were prepared on Si(100) substrates by R.F. magnetron reactive sputtering at $30\sim200watt$ R.F power range, and annealed at $600^{\circ}C\sim800^{\circ}C$ for 1 hour. The properties of $TiO_2$ thin films were analyzed using x-ray, ${\alpha}-step$, ellipsometer, scanning electron microscopy, and FT-IR spectrometer. Upon in-situ depositions, the initial phase of $TiO_2$ thin film showed non-crystalline phase at R.F. power $30\sim100$ watt. The crosssection of $TiO_2$ thin films were sbserved to be the columnar structure. With the increasing R.F power and annealing temperature, the grain size, crystallinity, refractive index, and void size of titanium oxides showed a tended to increase. The FT-IR transmittance spectra of titanium oxide thin films have the obsorption band of Ti-O bond, Si-O bond, Si-O-Ti bond and O-H bond. With the increase of R.F. power and annealing temperature, these films have the stronger bond structures. It is considered that such a phenomena is due to phase transition and good crystallinity

• STI Policy Review
• /
• v.1 no.1
• /
• pp.93-109
• /
• 2010

Over the last decade, some Korean enterprises have emerged to become global players in their specialized products. How have they achieved such tremendous technological progress in a short period of time? This paper explores that question by examining the characteristics of technological innovation activities at major Korean enterprises. The paper begins with a brief review of the stages of economic growth and science and technology development in Korea. Then, the existing literature, explaining the Korean innovation model, is analyzed in order to establish a new framework for the Korean innovation model. Specifically, Korean firms have experienced three sequential phases, and thus, the Korean model, at the firm level, can be coined as "path-following," "path-revealing," and "path-creating." Then, the stylized facts in the first phase (path-following) and the second phase (path-revealing) are discussed, in the context of empirical evidence from the areas of memory chips, automobiles, shipbuilding, and steel. In terms of technology development, the Korean model has evolved as "collective learning" in the first phase, "collective recombination" of existing knowledge and technology in the second phase, and is assumed as "collective creativity" in the third phase. Ultimately, all three can be classified as "collective creation". Korean firms now face a transition in the modes of technological innovation in order to efficiently implement the third phase. To achieve remarkable progress again, as they did in the past, and to sustain the growth momentum, Korean firms should challenge new dimensions such as creative technological ideas, distinctive technological capabilities, and unique innovation systems -- all of which connote 'uniqueness'. Finally, some lessons from the Korean technological innovation experience are addressed.