• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.463-465
• /
• 1998

The peculiarities of the polyvinylpyrrolydone (PVP) interaction with transition metal ions of the first row in solution were studied. It was shown that PVP macromolecules due to their swelling conformation in organic solvents form the stable metal complexes. Metal ions were bond with oxygen and nitrogen atoms of PVP lactam rings. In water solution every metal ion interacts with one or two oxygen atoms out of 10-12 monomer units of the polymer. The additional contraction of PVP macromolecule coils in water have been found out by dissolving of the polymer metal complexes (PMC) synthesized in organic media. Toxicity, blood forming and immune stimulating activity and pharmaco-kinetic too of obtained polymers and their metal completes have been investigated. The factors and effects that responsible fur changing of PMC physical-chemical and biological properties have been estimated.

• Journal of Welding and Joining
• /
• v.18 no.2
• /
• pp.49-56
• /
• 2000

Recently developed Austenite stainless steel, 309L was used to overlay on 3Cr-1Mo-V-Ti-B steels, using Electroslag welding process, which wide electrodes were adopted. Transition region in welding interlayer relating to disbonding crack was investigated. Also, the effect of welding condition on the width of transition region and coarsening grains of the austenite were studied. 1) With increasing welding speed the width of martensite at transient region was increased, but the amount of delta ferrite in weld metal was reduced, being fine grained. 2) The form of martensite at the transition region was occurred by reversible transformation during cooling since the interdiffusion of Cr and Ni from weld metal and Fe and C from base metals at the transition region, causes to lowering the concentration of Cr and Ni at the transition region, leading to increasing Ms point. 3) With increasing welding speed, the grain of austenite formed at the welding interface was finer. With increasing welding current under the same welding speed, the grain size of the austenite was finer. At high current, original grain size of the austenite is coarse, but the austenite has fine grains because the austenite was transformed to martensite during cooling. 4) In the case of high welding speed, the width of martensite at the welding interface was increased, but the grain size of austenite at the welding interface was finer. This indicates that the inhibition of disbonding crack may be achieved through dispersening fine carbides in the gain boundary.

• Journal of the Korean Magnetics Society
• /
• v.19 no.2
• /
• pp.43-46
• /
• 2009

The magnetic and structural properties of the (8, 0) BN nanotubes with transition metals (TM) of Fe, Co, or Ni substitution for B or N were investigated using a first-principles calculation. It was found that TM substitution makes the cross section being distorted and the bond length TM-B or TM-N being longer than that of the original B-N one. The magnetic moment is larger for the TM substitution for B than one for N, and it is mainly due to the 3d electrons of TM atoms.

• Journal of Electrochemical Science and Technology
• /
• v.5 no.3
• /
• pp.87-93
• /
• 2014

The fluorine-substituted $0.3Li_2MnO_3{\cdot}0.7Li[Mn_{0.60}Ni_{0.25}Co_{0.15}]O_{2-x}F_x$ cathode materials were synthesized by using the transition metal precursor, $LiOH{\cdot}H_2O$ and LiF. This was to facilitate the movement of lithium ions by forming more compact SEI layer and to reduce the dissolution of transition metals. The $0.3Li_2MnO_3{\cdot}0.7Li[Mn_{0.60}Ni_{0.25}Co_{0.15}]O_{2-x}F_x$ cathode material was sphere-shaped and each secondary particle had $10{\sim}15{\mu}m$ in size. The fluorine-substituted cathodes initially delivered low discharge capacity, but it gradually increased until 50th charge-discharge cycles. These results indicated that fluorine substitution gave positive effects on the structural stabilization and resistance reduction in materials.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.9
• /
• pp.576-580
• /
• 2016

Single-layered transition metal dichalcogenides (TMDs) exhibit more interesting physical properties than those of bulk TMDs owing to the indirect to direct bandgap transition occurring due to quantum confinement. In this research, we demonstrate that layer-by-layer laser etching of molybdenum diselenide ($MoSe_2$) flakes could be controlled by varying the parameters employed in laser irradiation (time, intensity, interval, etc.). We observed a dramatic increase in the photoluminescence (PL) intensity (1.54 eV peak) after etching the samples, indicating that the removal of several layers of $MoSe_2$ led to a change from indirect to direct bandgap. The laser-etched $MoSe_2$ exhibited the single $MoSe_2$ Raman vibration modes at ${\sim}239.4cm^{-1}$ and ${\sim}295cm^{-1}$, associated to out-of-plane $A_{1g}$ and in-plane ${E^1}_{2g}$ Raman modes, respectively. These results indicate that controlling the number of $MoSe_2$ layers by laser etching method could be employed for optimizing the performance of nano-electronic devices.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.2
• /
• pp.25-38
• /
• 2020

Photoelectrochemical water splitting has been considered as the most promising technology for generating hydrogen energy. Transition metal dichalcogenide (TMD) compounds have currently attracted tremendous attention due to their outstanding ability towards the catalytic water-splitting hydrogen evolution reaction (HER). Herein, we report the synthesis method of various transition metal dichalcogenide including MoS₂, MoSe₂, WS₂, and WSe₂ nanosheets as excellent catalysts for solar-driven photoelectrochemical (PEC) hydrogen evolution. Photocathodes were fabricated by growing the nanosheets directly onto Si nanowire (NW) arrays, with a thickness of 20 nm. The metal ion layers were formed by soaking the metal chloride ethanol solution and subsequent sulfurization or selenization produced the transition metal chalcogenide. They all exhibit excellent PEC performance in 0.5 M H₂SO₄; the photocurrent reaches to 20 mA cm^-2 (at 0 V vs. RHE) and the onset potential is 0.2 V under AM1.5 condition. The quantum efficiency of hydrogen generation is avg. 90%. The stability of MoS₂ and MoSe₂ is 90% for 3h, which is higher than that (80%) of WS₂ and WSe₂. Detailed structure analysis using X-ray photoelectron spectroscopy for before/after HER reveals that the Si-WS₂ and Si-WSe₂ experience more oxidation of Si NWs than Si-MoS₂ and Si-MoSe₂. This can be explained by the less protection of Si NW surface by their flake shape morphology. The high catalytic activity of TMDs should be the main cause of this enhanced PEC performance, promising efficient water-splitting Si-based PEC cells.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.1
• /
• pp.60-66
• /
• 2021

BACKGROUND: The concern over heavy metal(loid)s in arable land and agricultural products increases for public health in recent years. This study aims to identify transition characteristics of heavy metal(loid)s and to assess dietary risk in barley grown at the major producing districts in Korea. METHODS AND RESULTS: The soil and barley samples were collected from 38 locations around the major producing districts at Jeollabuk-do in Korea for the propose of examining the concentrations of heavy metal(loid)s. The 34 barley samples were separately purchased on the market for the same survey. The average concentration and range of arsenic (As), cadmium (Cd) and lead (Pb) in barley grown at the major producing districts in Korea were 0.037 (0.016-0.094), 0.028 (0.004-0.083) and 0.137 (0.107-0.212) mg kg-1, respectively. Currently, the maximum allowable level for barley Pb is set at 0.2 mg kg-1 in Korea, and the monitoring results suggested that some samples exceeded the maximum allowable level and required appropriate farming management. Bio-concentration factor values by heavy metal(loid)s in barley were high at Cd, copper (Cu) and zinc (Zn), similar to other crops, while As and Pb were low, indicating low transferability. CONCLUSION: Human exposure to As, Cd and Pb through dietary intake of barley might not cause adverse health effects due to relatively low concentrations, although the Pb in some barley was detected higher than the maximum allowable level. Further study on uptake and accumulation mechanism of Pb by barley might be required to assess the human health risk associated with soil contamination.

• Journal of Magnetics
• /
• v.9 no.1
• /
• pp.5-8
• /
• 2004

For the ferromagnetic combined samples, results of x-ray diffraction patterns showed no evidence of reaction between the $La_{0.67}Ca_{0.33}MnO_3, La_{0.67}Sr_{0.33}MnO_3$ and $CoFe_2O_4$. For the amount of $CoFe_2O_4$ increased, the Curie temperature of combined samples showed no appreciable change, whereas a metal-semiconductor transition temperature rapidly decreased. For the $La_{0.67}Sr_{0.33}MnO_3$ and 20 wt % $CoFe_2O_4$ combined sample, the metal-semiconductor transition temperature was decreased to 160 K compared with the $La_{0.67}Sr_{0.33}MnO_3$ with 192 K.

• Electronics and Telecommunications Trends
• /
• v.27 no.5
• /
• pp.10-17
• /
• 2012

MIT(Metal-Insulator Transition) 물질은 온도와 전기장과 같은 외부자극에 의해 절연체에서 금속으로 전이할 때 전기적 저항이 급격하게 감소하는 물질을 말한다. 그 감소폭은 약 $10^4{\sim}10^5$배 정도로 이전에 볼 수 없었던 아주 큰 값이다. 또한 이러한 급격한 감소로 인하여 NDR(Negative Difference Resistance) 같은 현상이 발생하며, 외부에서 주어지는 광학적 에너지에 의하여 전이가 일어나기도 한다. 이러한 여러 현상들을 이용하여 전자소자가 개발되고 그에 따른 응용 분야도 활발하게 연구가 진행되고 있다. 이러한 시도는 MIT 물질의 단독으로 제조된 소자뿐만 아니라 기존의 전자소자와 병행하여 더욱 시너지를 발휘할 것으로 예측된다. 본고에서는 MIT 현상의 간략한 설명과 현재 기술의 발전 방향, 간단한 응용소자에 관하여 개괄적으로 기술하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.291.2-291.2
• /
• 2016

3D semiconductor material of silicon that is used throughout the semiconductor industry currently faces a physical limitation of the development of semiconductor process technology. The research into the next generation of nano-semiconductor materials such as semiconductor properties superior to replace silicon in order to overcome the physical limitations, such as the 2-dimensional graphene material in 2D transition-metal dichalcogenide (TMD) has been researched. In particular, 2D TMD doping without severely damage of crystal structure is required different conventional methods such as ion implantation in 3D semiconductor device. Here, we study a p-type doping technique on tungsten diselenide (WSe2) for p-channel 2D transistors by adjusting the concentration of hydrochloric acid through Raman spectroscopy and electrical/optical measurements. Where the performance parameters of WSe2 - based electronic device can be properly designed or optimized. (on currents increasing and threshold voltage positive shift.) We expect that our p-doping method will make it possible to successfully integrate future layered semiconductor devices.