• Korean Journal of Animal Reproduction
• /
• v.26 no.2
• /
• pp.87-94
• /
• 2002

This study was performed during the four seasons for the production of transgenic pigs containing the Cellulase Digest Gene. Purebred Landrace gilts and sows approximately 8∼15 months of age (n=126) were used for the collection of 1-cell zygotes for DNA microinjection and transfer. Retrospectively, estrus synchronization and superovulation schemes were evaluated to assess practicality fur zygote collection. Synchronization and superovulation procedures were used that cyclic gilts were synchronized with 20mg altrenogest (ALT) per day for 9 days after PG600 administration followed by superovulation with 1000 IU pregnant mares serum gonadotropin (PMSG) and 750IU human chorionic gonadotrophin (hCG). The cellulase digestion gene for microinjection is rat elasterase promoter (rEl) linked to CelD gene. After hormone treatment, 1,422 embryos were collected from 91 donors and 95.6% (1,359/1,422) embryos were in 1-cell stage which can be visualized the pronuclei for DNA microinjection. A total of 725 DNA microinjected embryos transferred into 35 recipients and produced 65 piglets from 13 litters. Pregnancy rate according to the number of transferred embryos to recipients was higher the group which received 21 to 24 embryos (50.0%) than other groups 20.0% in less and 33.3% in more. A tail tissue was collected from 65 piglets for biopsy. PCR screening was performed on each DNA sample using two separate sets of primers specific for the 5'- and 3'-flanking region of the rEl-CelD gene. Five of the 65 piglets (7.69%) were positive for the transgene. This study provide useful information regarding production of transgenic pig for bioreactor research.

• Journal of Korea Technology Innovation Society
• /
• v.15 no.1
• /
• pp.185-202
• /
• 2012

This study analyzed the achievement characteristics of 21st Century Frontier R&D Program depending on the subject of study, type, period in order to provide necessary data required during planning and execution of the large scale R&D projects. 21st Century Frontier R&D Program is a representative national R&D project that has been supported for a decade. The research achievements were analyzed for researchers who participated in each four projects completed in 2010 and 2011 among 16 R&D projects of 21st Century Frontier R&D Program promoted by Ministry of Education, Science and Technology. The research is summarized as follows. First, the achievements varied depending on the main agent such as universities, R&D institutions, and industries. The achievement of universities includes significantly larger publications than those of R&D institutions and industries. Second, the rate of overseas patent application and registration were higher in industries significantly than those in other research agents. Third, the achievements differed depending on research type such as basic, applied, and development researches, and the development researches exhibited significantly higher achievements in domestic patent application and registration, overseas patent application, and technology transfer. Fourth, in terms of the research period, long-term projects show significantly larger number of domestic patent applications than those from short-term projects. Fifth, when achievements like the publication and overseas patent application were classified in such fields as bio, nano, and energy environment R&D, bio and nano fields showed higher achievement than the energy environment field. This research could empirically confirm that the achievement characteristics of large scale and long-term government support R&D projects vary for each research properties.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.1 s.114
• /
• pp.21-36
• /
• 2006

This study was undertaken to analyze the effects of pavement thermal properties and water retention characteristics on the surface temperature of the gray permeable cement concrete pavement during the summer. Following is a summary of major results. 1) The hourly surface temperature of pavement could be well predicted with a heat transfer model program that incorporated the input data of major meteorological variables including solar radiation, atmospheric temperature, dew point, wind velocity, cloudiness and the evaporation rate of the pavements predicted by the time domain reflectometry (TDR) method. 2) When the albedo was changed to 0.5 from an arbitrary starting condition of 0.3, holding other variables constant, the peak surface temperature of the pavement dropped by 11.5%. When heat capacity was changed to $2.5\;kJm^{-3}K^{-1}\;from\;1.5\;kJm^{-3}K^{-1}$, surface temperature dropped by 8.0%. When daily evaporation was changed to 1 mm from 2 mm, temperature dropped by 5.7%. When heat conductivity was changed to $2.5\;Wm^{-1}K^{-1}\;from\;1.5\;Wm^{-1}K^{-1}$, the peak surface temperature of the pavement fell by 1.2%. The peak pavement surface temperature under the arbitrary basic condition was $24.46^{\circ}C$ (12 a.m.). 3) It accordingly became evident that the pavement surface temperature can be most effectively lowered by using materials with a high albedo, a high heat capacity or a high evaporation at the pavement surface. The glare situation, however, is intensified by raising of the albedo, moreover if reflected light is absorbed into surrounding physical masses, it is changed into heat. It accordingly became evident that raising the heat capacity and the evaporative capacity may be the moot acceptable measures to improve the thermal characteristics of the pavement. 4) The sensitivity of the surface temperature to major meteorological variables was as follows. When the daily average temperature changed to $0^{\circ}C\;from\;15^{\circ}C$, holding all other variables constant, the peak surface temperature of the pavement decreased by 56.1 %. When the global solar radiation changed to $200\;Wm^{-2}\;from\;600\;Wm^{-2}$, the temperature of the pavement decreased by 23.4%. When the wind velocity changed to $8\;ms^{-1}\;from\;4\;ms^{-1}$, the temperature decreased by 1.4%. When the cloudiness level changed to 1.0 from 0.5, the peak surface temperature decreased by 0.7%. The peak pavement surface temperature under the arbitrary basic conditions was $24.46^{\circ}C$ (12 a.m.)

• Korean Journal of Optics and Photonics
• /
• v.9 no.5
• /
• pp.333-341
• /
• 1998

The novel integrated device, 1.55 ${\mu}{\textrm}{m}$ DR-LD(distrbuted reflector laser diode) integrated EA-MOD (electro-absorption modulator) as light source, is proposed to improve the device yield and its operational performances. This device can be easily fabricated by the selective MOVPE technique and its fabrication processes are almost the same as the reported 1.55 ${\mu}{\textrm}{m}$ DFB-LD(distributed feedback laser diode) integrated EA-MOD except the asymmetric gratings. The static and dynamic properties are investigated simultaneously by solving the transfer matrix method for light propagation, the time-dependent rate equation for carrier change and schr$\"{o}$dinger equation for QCSE (Quantum-Confined Stark Effect). The performances of the proposed device such as output power, chirp, and extinction ratio are compared with those of DFB-LD integrated EA-MOD. Under 10Gb/s NRZ modulation, we obtain that DR-LD integrated EA-MOD. is 30% higher in output power on the on-state, about 50% lower in chirp, and slightly larger in extinction ratio than DFB-LD integrated EA-MOD.-MOD.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.611-616
• /
• 2009

Purpose: The rate of fistulas occuring followed by resection of oral cavity, oropharyngeal, hypopharyngeal, and laryngeal cancer are reported to be 9 ~ 23% according to various documents. Neglected treatment of the fistula can result in a setback in proper treatment with restrictions in oral intake leading to delayed return to daily life. Furthurmore, in severe cases, it may injure important vessels and adjacent structures of the neck area. The author reviewed previously reported cases of treatment methods for fistulas recurring after diverse head and neck operations and with sharing the treatment experiments of our patients, we tried to present a treatment algorism for different fistula types. Methods: Our study was based on retrograde analysis of 64 patients who were clinically diagnosed with fistula after operation for cancer of the head and neck from 1997 to 2008 at Severance Hospital. Their primary sites of cancer were 8 oral cavity, 22 oropharynx, 25 hypopharynx, and 9 larynx. The patients were aged 45 to 75 years and the male to female ratio was 11 to 1. The patient's operation records and progress notes were evaluated for determination of degree of fistula and treatment methods. Results: Most fistulas were clinically suspected after postoperative 5 days and symptoms noted for detection of the fistula were erythema, purulent discharge, edema, tenderness, and fluctuation. The fistula was definitely diagnosed at postoperative 2 weeks with barium test and treatment method ranging from conservative management to operative procedure were applied to each patients. Total 21 patients were managed with conservative protocol. In 15 cases, direct repair of the fistula was done and more stable repair of the fistula was possible with using of TachoComb$^{(R)}$. Pharyngostoma was performed in 14 patients. Among them, 4 patients healed spontaneously, 5 patients were taken direct closure, 4 patients were taken pectoralis major musculocutaneous flap, and one patient was taken esophageal transfer. The other 14 patients were taken 11 pectoralis major musculocutaneous flaps and 3 free flaps without pharyngostoma formation. Conclusion: Fistula is a troublesome complication resulting after resection of head and neck cancer. Early detection and adequate treatment according to the period and condition of the fistula may prevent further complications and reduce the pain of the patient.

• Journal of Plant Biotechnology
• /
• v.29 no.3
• /
• pp.189-192
• /
• 2002

An efficient plant regeneration system of major cultivars of sweetpotato (Ipomoea batatas (L.) Lam.) in Korea via somatic embryogenesis was established. Embryogenic calli were formed from shoot apical meristems of sweetpotato cultivars when cultured on LS medium supplemented with 1 mg/L auxin (2,4-D, picloram, dicamba). Among three kinds of auxin, 1 mg/L 2,4-D showed the highest embryogenic calli induction rate. After 4 weeks of cultures on LS medium supplemented with 1 mg/L 2,4-D, embryogenic calli induction rates of Sinhwangmi, Zami, Yulmi, and White Star were 86%, 78%, 76%, and 80%, respectively. Upon transfer onto LS basal medium, most of somatic embryos developed into plantlets. Regenerated plantlets were transplanted to potting soil and grown to mature plants in a greenhouse.

• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.176-182
• /
• 2012

The methane dry reforming has received the considerable attention in recent years, mainly as an attractive route to produce synthesis gas (CO, $H_2$) from green-house gases ($CH_4$, $CO_2$) for resources. However, this process has not been commercialized due to the high temperature and catalyst deactivation. In this study, Co-Ru-Zr catalysts supported on $SiO_2$ were studied for the characterization of methane dry reforming reaction and the preliminary data for process development were achieved. The crystal structure of catalysts was measured by XRD, the surface area and pore size were analyzed by BET, and the element composition of catalyst were analyzed by EDS. Conversions of methane and carbon dioxide were analyzed by GC. In addition, reaction rate constants were obtained from the reaction kinetic study and the optimum catalyst size that does not affect mass transfer from reactants was also determined. The selected pellet-type catalyst maintained activation for 720 h at $850^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.527-535
• /
• 2017

Heat management is one of the most critical issues in Polymer Electrolyte Membrane Fuel Cells (PEMFCs) installed inside the fuel cell power pack of a fuel cell battery hybrid UPS. If the heat generated by the chemical reaction in the fuel cell is not rapidly removed, the durability and performance of the fuel cell may be affected, which may shorten its lifetime. Therefore, the objective of this study is to select and propose a proper cooling method for the fuel cells used in the fuel cell power pack of a UPS. In order to find the most appropriate cooling method, the various design factors affecting the cooling performance were studied. The numerical analysis was performed by a commercial program, i.e., COMSOL Multiphysics. Firstly, the surface temperature of the 1 kW class fuel cell stack with the cooling fans placed at the top was compared with the one with the cooling fans placed at the bottom. Various rotation speeds of the cooling fan, viz. 2,500, 3,000, 3,500, and 4,000 RPM, were tested to determine the proper cooling fan speed. In addition, the influence of the inhaled air flow rate was investigated by changing the porous area of the grille, which is the entrance of the air flowing from the outside to the inside of the power pack. As a result, it was found that for the operating conditions of the 1 kW class PEMFC to be acceptable, the cooling fan was required to have a minimum rotating speed of 3500 RPM to maintain the fuel cell surface temperature within an acceptable range. The results of this study can be effectively applied to the development of thermal management technology for the fuel cells inside the fuel cell power pack of a UPS.

• The KIPS Transactions:PartC
• /
• v.18C no.4
• /
• pp.265-278
• /
• 2011

The objective of this paper is to analyze and characterize end-to-end packet statistics after modeling and simulation of WiFi (IEEE 802.11g) and WiMAX (IEEE 802.16e) of a virtual wireless network using OPNET Modeler Wireless Suite. Wireless internal and external network simulators such as Remcom's Wireless InSite Real Time (RT) module, WinProp: W-LAN/Fixed WiMAX/Mobile WiMAX, and SMI system, are designed to consider data transfer rate based on wireless propagation signal strength. However, we approached our research in a different perspective without support for characteristic of these wireless network simulators. That is, we will discuss the purpose of a visual analysis for these packets, how to receive each point packets (e.g., wireless user, base station or access point, and http server) through end-to-end virtual network modeling based on integrated wired and wireless network without wireless propagation signal strength. Measuring packet statistics is important in QoS metric analysis among wireless network performance metrics. Clear packet statistics is an especially essential metric in guaranteeing QoS for WiMAX users. We have found some interesting results through modeling and simulation for virtual wireless network using OPNET Modeler Wireless Suite. We are also able to analyze multi-view efficiency through experiment/observation result.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.1
• /
• pp.1-6
• /
• 2017

Recent researches on radio frequency energy harvesting networks(RF-EHNs) with limited energy resource like battery have been focusing on the development of a new scheme that can effectively extend the whole lifetime of a network to semipermanent. In order for considerable increase both in the amount of energy obtained from radio frequency energy harvesting and its charging effectiveness, it is very important to design a network that supports energy harvesting and data transfer simultaneously with the full consideration of various characteristics affecting the performance of a RF-EHN. In this paper, we proposes an interference-based charging aware routing protocol(ICARP) that utilizes interference information and charging time to maximize the amount of energy harvesting and to minimize the end-to-end delay from a source to the given destination node. To accomplish the research objectives, this paper gives a design of ICARP adopting new network metrics such as interference information and charging time to minimize end-to-end delay in energy harvesting wireless networks. The proposed method enables a RF-EHN to reduce the number of packet losses and retransmissions significantly for better energy consumption. Finally, simulation results show that the network performance in the aspects of packet transmission rate and end-to-end delay has enhanced with the comparison of existing routing protocols.