• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.54-57
• /
• 2003

Since passenger cars require five wheels including a spare, the weight reduction of wheels without sacrificing performance is important. Recently, the structured components of cars made of steel are replaced by composites. plastics and other nonmetallic materials such as aluminum and magnesium for weight reduction. From these new tried materials are most promising due to their high specific stiffness and specific strength. The composites manufactured by resin transfer molding (RTM) process has not only low cost for the manufacturing but also reduces the lead time and development because the molds for RTM is easy to manufacture. In this work, composite wheels for passenger cars were designed and manufactured by RTM process. Since surface quality of wheels is important for passenger cars, the optimal stacking sequence for composite wheels was selected considering surface quality and mechanical properties. Also, the manufacturing method for the composite mold was depicted.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.2
• /
• pp.95-104
• /
• 2018

Using network betweenness centrality we attempt to analyze the characteristics of Seoul metropolitan subway lines. Betweenness centrality highlights the importance of a node as a transfer point between any pairs of nodes. This 'transfer' characteristic is obviously of paramount importance in transit systems. For betweenness centrality, both traditional betweenness centrality measure and weighted betweenness centrality measure which uses monthly passenger flow amount between two stations are used. By comparing traditional and weighted betweenness centrality measures of lines characteristics of passenger flow can be identified. We also investigated factors which affect betweenness centrality. It is the number of passenger who get on or get off that significantly affects betweenness centrality measures. Through correlation analysis of the number of passenger and betweenness centrality, it is found out that Seoul metropolitan subway system is well designed in terms of regional distribution of population. Four measures are proposed which represent the passenger flow characteristics. It is shown they do not follow Power-law distribution, which means passenger flow is relatively evenly distributed among stations. It has been shown that the passenger flow characteristics of subway networks in other foreign cities such as Beijing, Boston and San Franciso do follow power-law distribution, that is, pretty much biased passenger flow traffic characteristics. In this study we have also tried to answer why passenger traffic flow of Seoul metropolitan subway network is more homogeneous compared to that of Beijing.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.618-622
• /
• 2000

This paper describes the correlation between the interior noise and the trunk wall vibration. Using the vibro-acoustic reciprocity, effect of the trunk wall vibration on the compartment noise is investigated on a medium size car. In the low frequency range, vehicle interior noise is dominated by several acoustic modes of the passenger compartment and the vibration modes of the surrounding shell parts. Especially, vibration of the trunk wall radiates sound and it is transferred through holes on the package tray into the passenger compartment. This paper experimentally reveals that sound can be well produced at some particular vibration modes of the trunk lid and it strongly influences the compartment noise through package tray holes. Contributions of the trunk walls to the interior noise are estimated by measuring the acoustic-structural transfer function, based on the vibro-acoustical reciprocity theorem.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.8
• /
• pp.133-142
• /
• 2018

Subway metro scheduling is one of the most important problems impacting passenger convenience today. To operate efficiently, the Seoul metro uses regular, periodic schedules for all lanes, both north and southbound. However, many past studies suggest that non-periodic scheduling would better optimize costs. Since the Seoul metro is continuously facing a deficit, adopting a non-periodic schedule may be necessary. Two objectives are presented; the first, to minimize the average passengers' waiting time, and the second, to minimize total costs, the sum of the passenger waiting time, and the operational costs. In this paper, we use passenger smart card data and a precise estimation of transfer times. To find the optimal time-table, a genetic algorithm is used to find the best solution for both objectives. Using Python 3.5 for the analysis, for the first objective, we are able to reduce the average waiting time, even when there are fewer trains. For the second objective, we are able to save about 4.5 thousand USD with six fewer trains.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.3
• /
• pp.66-75
• /
• 1997

Sound transmission from the luggage comparment into the car cabin is important in the viewpoint if exhaust and road noises of passenger cars. In this paper, acoustic modal coupling between passenger and luggage compartments through loudspeaker holes at parcel shelf is dealt with for a sedan type passenger car with rigid rear seat. For these purposes, a half-scaled model car is tested and computed by the indirect BEM. Predicted acoustic transfer functions are compared with experimental ones and they agree reasonably well. It is found that the fore-aft resonance frequencies of the passenger cavity in the absence of coupling holes are tend to shift to higher frequencies when the luggage compartment is coupled to the passenger cavity.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.14-24
• /
• 2018

Pedestrian movement of passengers using smart card within stations can be divided into three types of activities - straight ride and alight, line transfer, and station transfer. Straight ride and alight is transfer activity for which the card terminal and embarking line are identical. In this case, straight ride occurs at the origin station and straight alight occurs at the destination station. Line transfer refers to activity in which the subway line embarked on by the passenger is different from that which is disembarked. Succinctly, line transfer is transfer at a middle station, rather than at origin or destination stations. Station transfer occurs when the card terminal line and embarking line are different. It appears when station transfer happens at the origin station as starting transfer, and at the destination station as destination transfer. In the case of Metropolitan smart card data, origin and destination station card terminal line number data is recorded, but subway line data does not exist. Consequently, transportation card data, as it exists, cannot adequately be used to analyze pedestrian movement as a whole in subway stations. This research uses the smart card data, with its constraints, to propose an analysis model for passenger pedestrian movement within subway stations. To achieve this, a path selection model is constructed, which links origin and destination stations, and then applied for analysis. Finally, a case study of the metropolitan subway is undertaken and pedestrian volume analyzed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.67-83
• /
• 2018

This research is motivated by the question, "Where, when, and through what mode does an individual passenger moving within a subway station use to travel from starting to final destinations ?" To answer this, the stations passed by the individual passenger, the path taken, and modes used need to be known beforehand. In the metropolitan integrated public transportation fare system, Automated Fare Collection System(AFC) can be a source of information on transit modes, stations, and paths of individual passengers. AFC calculates a fare for the passenger based on travel data such as boarding and alighting stations, time, and mode used. In this research, an Selected Station Analysis(SSA) method, in which AFC data is used to observe passenger movement in the metropolitan public transportation subway station from the perspective of subway transfer stations, is proposed. SSA subdivides individual passenger movement in transfer stations and analyzes initial station/time and final destination station/time information using the trip chain perspective.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1563-1571
• /
• 2011

In the commercial trains, there are monitors hung on the ceiling which simply display broadcasted contents so a passenger in a cabin has only one choice of passively watching them or not. To lead the application of IT in railway, keep a passenger from tedious journey, or help a passenger having a productive time, an MCS(Multimedia Contents System) was analyzed, designed, and implemented. A passenger can select and use a content from a smart terminal that is attached at the passenger's seat. A smart terminal is one that has its own memory and processor to handle informations and interact with a user. In this paper, the contents, such as train schedule, transfer information, traveling information, e-book, TV, music, and game, that the MCS can provide were introduced. To validate the applicability of the MCS on a next generation high-speed train, a testing environment will be set on a pre-production car and tested. The successful installation of the MCS will boost up the competitive power of the next generation train in the world market.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.157-162
• /
• 2003

This study is analysis on the heat transfer of exhaust gas into the muffler at passenger Car. Numerical analysis with Computational fluid Dynamics(CFD) was carried out to investigate exhaust gas flow. The STAR-CD S/W used for the three dimensional steady state CFD analysis in a muffler. The Navier-Stokes Equation is solved with the SIMPLE method in a general cartesian coordinates system. Result of numerical simulation; Inlet and outlet temperature shown about ${\Delta}T=239K$, 216K, 202K at in the muffler. Heat transfer was progressed quickly by atmospheric temperature of muffler external at in the near wall.

• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.806-810
• /
• 2000

This paper presents a practical method for reduction of interior noise and improvement of sound quality in compartment of passenger car. The tested vehicle has a booming noise problem at rear passenger seats. In order to identify the transfer path of interior noise, the running modal analysis, the vibro-acoustic frequency transfer response and the noise path analysis are systematically employed. Using these various methods, it has been founded that the rear part of the roof of the test car was a noise source for the booming noise. Through the modification of the roof, the booming noise has been reduced and sound quality inside car also has been improved.