• 설비공학논문집
• /
• 제15권3호
• /
• pp.220-229
• /
• 2003

An experimental study on the air-side pressure drop and heat transfer coefficient of slit fin-tube heat exchanger has been carried out. The data reduction methodology for air-side heat transfer coefficients in the literature is not based on a consistent approach. This paper focuses on new method of data reduction to obtain the air-side performance of fin-tube heat exchanger using R22 and recommends standard procedures for dry surface heat transfer estimation in fin-tube heat exchanger having refrigerant on the tube-side. Results are presented as plots of friction f-factor and Colburn j -factor against Reynolds number based on the fin collar outside diameter and compared with previous studies. The data covers a range of refrigerant mass fluxes of 150~250 kg/$m^2$s with air flows at velocity ranges from 0.6 m/s to 1.6 m/s.

• 한국소음진동공학회논문집
• /
• 제20권10호
• /
• pp.900-906
• /
• 2010

This note proposes vibration-free motor control through modified LQG/LTR methodology. A conventional LQG/LTR method is a design tool in the frequency domain. However, unlike the conventional one, the proposed one is a time response based design method. This feature is firstly designed by parameterized settling time control gain through the target loop design procedure and the feature is secondly realized by loop transfer recovery. In order to show convergence to the target loop transfer functions, asymptotic behaviors of the open and the closed loop transfer functions are shown. At the conclusion, it is verified that the proposed method is robustly stable to parametric uncertainties through ${\mu}$-plot.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.761-772
• /
• 2009

The introduction of KTX (Korea Train eXpress) provided passengers with a much faster mode of transport, and KTX has become a model railway system. Express railway stations are emphasized as public transit transfer centers, but their service evaluations were not performed appropriately so far. It is possible to know the level of service by developing valuation criteria for their evaluations. The evaluation of transfer centers mainly consists of two parts; connective service with other travel m odes, and transfer service inside transfer stations. Connection is defined as the inter-connection of multi-transportation vehicles, and transfer means that a passenger changes his travel mode to another. Such connective service and transfer service are evaluated by the level of service in terms of transfer facilities, the appropriateness of station layout and the quality of information throughout the facilities. We developed the service evaluation indicators of connective facilities and referred to the indicators of transfer facilities. We examined the 7 stations in Korea that are currently in operation and standardized the methodology of the evaluation process by applying the indicators suggested in this study.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 추계학술발표회요약집
• /
• pp.123-123
• /
• 2001

• 대한교통학회지
• /
• 제28권1호
• /
• pp.143-156
• /
• 2010

환경오염을 유발하지 않고 사고가 적다는 점에서 보행에 관한 연구가 증가하고 있으며 현재 대중교통의 중요성이 환경적인 측면에서 부각되며 대중교통 수단간의 환승이 중요시되고 있다. 환승을 위해 보행하는 환승시설물을 중심으로 본 연구에서는 사당역의 환승통로와 신도림역의 내부계단을 현장조사를 통하여 각각의 용량을 조사하여 연구에 이용하였다. 기존의 서비스수준 산정방식으로는 첨두시간대의 보행자 통행패턴을 나타낼 수 없다는 문제점을 인식하고 본 연구에서는 대기행렬이론과 시설물의 가용률이라는 개념을 이용하여 실제 시설물에서 나타나는 서비스수준을 그대로 반영할 수 있는 방법론에 대해 연구를 진행하였다. 그 결과 현재 서비스수준 산정방식을 이용하여 시설물을 평가 또는 설계했을 경우 실제 상황보다 과대평가되는 위험함이 있었고, 본 연구의 방법론과 실제 현장상황을 비교분석한 결과 유사한 형태를 띄는 것으로 나타나 본 연구의 방법론이 실제상황에 근접한 서비스수준을 산출한다고 할 수 있다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1119-1122
• /
• 2009

The use of cooling towers in the air conditioning systems of buildings is increasing. In closed wet cooling towers, the heat transfer between the air and surface tubes can be composed of the sensible heat transfer and the latent heat transfer. The latent heat transfer is affected by the air and spray water. This study provides a designing methodology of heat exchanger for closed wet cooling tower. The correlation equation was derived to interpret the mass transfer coefficient based on the analogy of the heat and mass transfer and the experimental results. The results from this correlation equation showed fairly good agreement with experimental data.

• 한국전산유체공학회지
• /
• 제7권2호
• /
• pp.43-52
• /
• 2002

This paper presents the numerical methodology of ATHOS3 code for thermal hydraulic analysis of steam generators in nuclear power plant. Topics include porous media approach, governing equations, physical models and correlations for solid-to-fluid interaction and heat transfer, and numerical solution scheme. The ATHOS3 code is applied to the thermal hydraulic analysis of steam generator in the Korea Kori Unit-1 nuclear power plant and the computed results are presented

• 대한기계학회논문집
• /
• 제7권2호
• /
• pp.138-144
• /
• 1983

To evaluate the dynamic characteristics of machine tool system, the system is modelled as a closed-loop system composed of cutting process and improved machine tool structures. The proposed machine tool structure model is constructed in consideration of energy transfer through the system. A new methodology to identify the machine tool dynamics by adopting impulse response and impulse cutting techniques is also proposed. It is shown that the methodology is successfully applied to a machine tool system to identify its dynamic characteristics employing the improved model.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권6호
• /
• pp.390-394
• /
• 2016

This paper presents a new comparison method for haze-removal algorithms in next-generation automotive systems. Compared to previous peak signal-to-noise ratio-based comparisons, which measure similarity, the proposed modulation transfer function-based method checks sharpness to select a more suitable haze-removal algorithm for lane detection. Among the practical filtering schemes used for a haze-removal algorithm, experimental results show that Gaussian filtering effectively preserves the sharpness of road images, enhancing lane detection accuracy.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 1998년도 학술대회지 vol.1
• /
• pp.57-68
• /
• 1998

ㆍ STEP is an International Standard (ISO 10303) - that defines the methodology to create computer interpretable product data models. ㆍ STEP Implementation - allows exchange and sharing of product data while retaining semantics throughout the product life cycle. ' STEP is in deployment - PDM data exchange at Boeing and others - Geometry data exchange at GM and others ㆍ The STEP community overcomes obstacles - “They will never finish the standard” (done 1994) - “They will never be able to transfer solids” (done 1995) - “They will never make solids transfer reliable” (done 1997) - “They will never implement all those Application Protocols”(TBD)(omitted)