Browse > Article

Thermal-Hydraulic Analysis Methodology of Nuclear Power Plant Steam Generator  

Choi Seok-Ki (한국원자력연구소 칼리머기술개발팀)
Kim Seong-O (한국원자력연구소 칼리머기술개발팀)
Choi Hoon-Ki (창원대학교 기계공학과)
Publication Information
Journal of computational fluids engineering / v.7, no.2, 2002 , pp. 43-52 More about this Journal
Abstract
This paper presents the numerical methodology of ATHOS3 code for thermal hydraulic analysis of steam generators in nuclear power plant. Topics include porous media approach, governing equations, physical models and correlations for solid-to-fluid interaction and heat transfer, and numerical solution scheme. The ATHOS3 code is applied to the thermal hydraulic analysis of steam generator in the Korea Kori Unit-1 nuclear power plant and the computed results are presented
Keywords
Nuclear Power Plant; Steam Generator; Thermal Hydraulic Analy;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Keeton, L. W., Singhal, A. K. and Srikantiah, G. S., 1986, ATH0S3: A Computer Program for Thermal-Hydraulic Analysis of Steam Generator, EPRI NP-4604-CCM, Vol. 1-3
2 Chan, R. K. C., Masiello, P. J. and Srikantiah, G. S., 1986, PORTHOS - A Computer Code for Solving General Three-Dimensional, Time-Dependent Two-Fluid Equations, ASME 86-WA/NE-3
3 Fortino, R. T., Oberjohn, W. J., Rice, J. G. and Comelius, D. K., 1980, Thermal-Hydraulic Analyses of Once-Through Steam Generator. EPRI NP-1431
4 Carlucci, L. N., 1982, Thermal Hydraulic Analysis of the Westinghouse Model 51 Steam Generator, EPRI NP-2683
5 Hopkins, G. W., 1988, Verification of the ATH0S3 Code Against Feeding and Preheat Steam Generator Test Data, EPRI NP-5728
6 Moody, L. F., 1944, 'Friction Factors for Pipe Flow,' Trans. ASME, Vol. 66 pp. 671
7 Bergelin, O. P., Colburn, A.P. , and Hull, H. L., 1950, Univ. of Delaware Eng. Expt. Station Bulletin No.2
8 Owens, W. L. , 1961, 'Two-Phase Pressure Gradient,' Int. Heat Transfer Conference, Part II , pp. 363-368, Univ. of Colorado
9 Rohsenow, W. M., 1951, 'A Method of Correlating Heat Transfer Data for Surface Boiling of Liquids,' Trans ASME, Vol. 74, pp. 769
10 Dingee, D. A. and Chastain, J. W., 1968, 'Heat Transfer from Parallel Rods in an Axial Flow,' ASME, Reactor Heat Transfer Conference, pp. 462
11 Grimisol, E. D., 1937, 'Correlation and Utilization of New Data on Flow Resistance and Heat Transfer for Cross Flow over Tube Banks,' ASME Trans. , Vol. 59, pp. 583
12 Chen, J. C., 1963, 'A Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow,' ASME preprint 63-HT-34
13 Zuber, N., and Findly, J. A., 1965, 'Average Volumetric Concentration in Two Phase Flow Systems,' J. Heat Transfer, Vol. 87, pp. 453
14 Jacob, M. , 1938, 'Heat Transfer and Flow Resistance in Cross Flow of Gases Over Tube Banks,' ASME, 60:381
15 Dwyer, 0. E., et al, 1956, 'Cross Flow of Water Through a Tube Bank at Reynolds Numbers up to a Million,' Industial and Engineehng Chemistry, Vol. 48, No. 10, pp. 1383
16 Ishii, M., 'One-Dimensinal Drift-Flux Model and Constitutive Equations for Relative Motion Between Phases in Various Two-Phase Flow Regimes,' ANL-77-47, pp. 34
17 Collier, J. G. and Pulling, D. J., 1962, 'Heat Transfer to Two-Phase Gas Liquid Systems, Part II : Further Data on Steam Water Mixtures,' U.K. Report AERE-R-3809
18 Dittus, F. W. and Boelter, L. M. 1930, Univ. of California Publ. Eng., Vol. 2, pp. 443
19 Launder, B. E. and Spalding, D. B., 1972, Lectures on Mathematical Models of Turbulence, Academic Press, London and New York
20 Lee, J. Y. and No, H. C., 1986, Three Dimensional Two Fluid Code for U-Tube Steam Generator Thermal Design Analysis, Proc. 2nd Int. Topical Meeting on Nuclear Power Plant Thermal Hydraulics and Operations, pp. 3-31 to 3-27. Tokyo, Japan
21 Bankoff, S. G., 1960, 'A Variable Density Single-Fluid Model for Two-Phase Flow with Particular Reference to Steam-Water Flow,' Trans. ASME Journal of Heat Transfer, Vol. 82, pp. 265
22 Thom, J. R. S. , 1964, 'Predition of Preessure Drop During Forced Circulation Boiling of Water,' Int. J. Heat Mass Transfer, Vol. 7, pp. 709
23 Lellouche, G. S. and Zolotar, B. A., 1982, 'A Mechanistic Model for Predicting Two Phase Void Fraction for Water in Vertical Tubes, Channels and Rod Bundles,' EPRI NP-2246-SR
24 Martinelli, R. C. and Nelson, D. B., 1948, 'Prediction of Pressure Drop During Forced Circulation Boiling of Water,' Trans. ASME 70:695
25 Choi, S. K. et al., 2001, 'Thermal Hydraulic Analysis of Secondary Side of Steam Generators', KAERI Report
26 Lee, A. Y. and Masiello, R, J., 1988, ATH0S3 Computer Code Verification, Vol.1: 2/3 Scale Test, Vol. 2: 0.95 Scale Test, EPRI NP-5557
27 Olive, J., 1982, Simulation of Three Dimensional Two-Phase Flow in a PWR Steam Generator, Proc. lOth IMACS Work Congress on System Simulation and Scientific Computation, pp. 136-139
28 Rohsenow, W. M., and Bergles, A. E., 1963, 'The Determination of Forced Convection Surface Boiling Heat Transfer,' ASME-AIChE paper 63-HT-22
29 Collier, J. G., 1972, 'Convective Boiling and Condensation,' McGraw Hill Maidenhead, U. K