• 설비공학논문집
• /
• 제12권5호
• /
• pp.457-465
• /
• 2000

An experiment was carried out to evaluate the thermal performance of the wire-coil inserts method. Tested were the smooth tubes with the wire-nil inserts of various pitch and helix angle combinations. Test fluids were the 50%-solution of the ethylene glycol and the Hue water. Heat transfer coefficient and friction factors were deduced from the measured values of temperatures, flowrates and pressure drops. A unified dimensionless correlation for the heat transfer coefficients was developed as a function of the pitch to diameter ratio, the Reynolds number and the Prandtl number. An exergy analysis was performed to evaluate an optimal operating condition with the wire-coil inserts.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.12-22
• /
• 2007

This paper presents to predict the powertrain structure-borne noise which is primary resource of interior noise. As the first step, it is built up a hybrid powertrain model which is based on the real powertrain which is verified with static and dynamic properties. The methods for verifying are modal analysis and running vibration testing which are experimentally implemented. Based on the Hybrid powertrain component model, an initial predictive assembly model is simulated. As the second step, the characteristic transfer functions are measured that are dynamic stiffness of rubber mounts and vibro-acoustic transfer function based on the acoustic reciprocity. Several techniques utilizing special experimental devices have been proposed for this research. Finally, the structure-borne noise by powertrain will be predict and verify with dynamic simulation and experiment.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1188-1194
• /
• 2008

As computation technologies has developed, the analysis using load transfer is mainly performed. But most of the functions used in the above program has been developed in foreign countries. Also in our nation, lots of studies concerning load transfer are being researched. The investigation of suitability about the piles installed in our grounds, however, is required as functions acquired experientially, basing on the piles installed in foreign grounds. In this background, the load transfer curve required to use load transfer method on its design through the analysis of field tests inside our nation intends to be made, on which this research focuses.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.539-550
• /
• 2009

As computation technologies has developed, the analysis using load transfer is mainly performed. But most of the functions used in the above program has been developed in foreign countries. Also in our nation, lots of studies concerning load transfer are being researched. The investigation of suitability about the piles installed in our grounds, however, is required as functions acquired experientially, basing on the piles installed in foreign grounds. In this background, the load transfer curve required to use load transfer method on its design through the analysis of field tests inside our nation intends to be made, on which this research focuses.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.760-766
• /
• 2008

As computation technologies has developed, the analysis using load transfer is mainly performed. But most of the functions used in the above program has been developed in foreign countries. Also in our nation, lots of studies concerning load transfer are being researched. The investigation of suitability about the piles installed in our grounds, however, is required as functions acquired experientially, basing on the piles installed in foreign grounds. In this background, the load transfer curve required to use load transfer method on its design through the analysis of field tests inside our nation intends to be made, on which this research focuses.

• 한국수자원학회논문집
• /
• 제49권9호
• /
• pp.789-798
• /
• 2016

최근의 우리나라 수계에서의 하천에서의 조류 대번성은 심각한 사회 환경적 문제가 되고 있다. 이중 독성이 강한 남조류의 발현은 수생태계의 건강성과 안전한 물공급에 위협이 될 수 있다. 영산강 수계의 승촌보와 죽산보 지점의 남조류 세포수와 환경인자간의 인과관계 분석을 위해 선백색화 시계열간의 배타적 상관분석을 수행하였고 이를 기반으로 이들 사이의 입출력 모형을 도출하였다. 입출력 모형의 겨울철 남조류 세포수 반응 특성을 고려하기 위해서 수온의 문턱거동을 도입하였고, 모형의 남조류 세포수에 대한 설명력을 증가시키는 효과를 얻었다. 입출력 모형의 남조류 세포수의 모의능이 완전하진 않으나, 비교적 간단한 구조를 가진 입출력 모형의 구조는 모형 적용의 용이성이 높은 것으로 판단된다.

• International Journal of Quality Innovation
• /
• 제4권1호
• /
• pp.1-19
• /
• 2003

This paper describes the origins, evolution of Quality Function Deployment and its transfer to the West. Following a comprehensive review of the literature and how QFD has been defined, and applied, the paper analyses the critical factors which impinge on QFD implementation success. A discussion which covers the enabling criteria found to be inherent in Japanese applications is contrasted with the Western approaches documented hitherto. In particular the Company Wide Quality Control (CWQC) approach in Japan versus the emerging concept of Total Quality Management and their impact on QFD implementation. A critical analysis of the main differences isolated from the review of the literature and which characterise the Japanese method of QFD implementation which is leading, and The Western approaches which appear to be lagging is included in the paper, together with some useful conclusions:

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.247-249
• /
• 2008

There are many types of grid-connected inverter controllers; Synchronous Reference Frame (SRF)-based controller is the most popular methods. SRF-based controller is capable for reducing both of zero-steady state error and phase delay. However, SRF-based controller has a complex algorithm to apply in real application such as digital processor. Resonant controller is also reduced zero-steady state error, but its transfer function has a high order. In this paper, a simple proportional control is applied for grid connected inverter with LCL filter. LCL filter is a third order system. Applying a simple proportional controller is not increased the order of closed loop transfer function. By this technique, the single phase model is easily obtained. To reduce steady state error, proportional gain is set as high as possible, but it may produce instability. To compromise between a minimum steady state error and stability, the single phase model is evaluate through Root Locus and Bode diagram. PSIM simulation is used to verify the analysis.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.248-256
• /
• 1993

본 연구에서는 연속계의 진동모드를 구하여 일반질량(generalize mass)을 유 동하였으며 집중, 분포질량 변경에 따른 일반질량 변화량을 산출하여 감도계수를 구하 는 새로운 연속계 감도해석 방법을 제안하였고, 타당성을 검증하기 위해 외팔보, 계단 보에 적용하여 감도계수, 고유진동수, 진동모드, 전달함수의 변화량을 예측하고 이론 치와 비교하였다. Fig.1은 본 연구의 흐름도를 나타낸다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권1호
• /
• pp.57-61
• /
• 1999

Multiple slab waveguides are analyzed by using the transfer matrix method and by introducing a virtual leaky layer. It is shown that the analysis is conceptually equivalent to the prism coupling phenomenon. The Lorentzian function is made use of toobtain the eigenvalues of multiple waveguides. Computer simulations are performed onsingle layered, double layered wavegurdes. The calculation results are confirmed to agree well with those of the finite difference method.