• Journal of Advanced Navigation Technology
• /
• v.13 no.1
• /
• pp.97-103
• /
• 2009

In this paper, the structure and detailed specifications of the HDR-WPAN physical layer have been analyzed and the block module of transmitter and receiver have been also designed, and analyzed the performance as well. In the process of transmitter design, it concentrated on all possibility of modulation of QPSK, DQPSK and 16/32/64QAM-TCM, which could be available for mode selection due to the transmission rate. In addition to the receiver module, DQPSK and TCM decoding algorithm is mainly concerned. After designing the transceiver MODEM using VHDL, we have programmed on the platform board and verified the functions of the MODEM. Some experimental results showed that it can be considered a possibility of data communication without error over SNR 22dB.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.17-20
• /
• 2001

In this paper, we realized a transceiver system for short distance communication with a commercial RF module working in ISM band. Also we measured system performance by transmitting baseband data in a building and then we compared the demodulated data bits with stored data bits in a PC connected with demodulator. The RF module In the experiments works only in the bandwidth of 424MHz-429MHz. The signal level degrades as the distance between transmitter and receiver increases. We measured the signal level and bit error and present the measured results with various locations in the building. And it is concluded that the measured data may be used in the design of short distance network in a building.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.42-47
• /
• 2001

Analyzing the ECG signal, we can find heart disease, for example, arrhythmia and myocardial infarction, etc. Particularly, detecting arrhythmia is more important, because serious arrhythmia can take away the life from patients within ten minutes. In this paper, we would like to introduce the signal processing for ECG analysis and the device made for wireless communication of ECG data. In the signal processing, the wavelet transform decomposes the ECG signal into high and low frequency components using wavelet function. Recomposing the high frequency bands including QRS complex, we can detect QRS complex and eliminate the noise from the original ECG signal. To recognize the ECG signal pattern, we adopted the polynomial approximation partially and statistical method. The ECG signal is divided into small parts based on QRS complex, and then, each part is approximated to the polynomials. Comparing the approximated ECG pattern with the database, we can detect and classify the heart disease. The ECG detection device consists of amplifier, filters, A/D converter and RF module. After amplification and filtering, the ECG signal is fed through the A/D converter to be digitalized. The digital ECG data is transmitted to the personal computer through the RF transceiver module and serial port.

• International journal of advanced smart convergence
• /
• v.11 no.3
• /
• pp.28-35
• /
• 2022

Interference always exists between wireless communication systems used in the same frequency band or adjacent frequency bands. In order to deploy a new wireless communication system such as a 5G system, a new frequency band must be allocated to the system. For this purpose, after analyzing interference between the existing system and the new system, a method of setting a frequency guard band or a minimum separation distance has been used as a passive method to limit the interference effect. This paper presents a wideband RF IRM(Interference Reduction Module) that can actively reduce the influence of interference between wireless communication systems. The wideband RF IRM can reduce the interference effects of 5G signals on satellite signals. The principle and structure of the wideband RF IRM are presented. The wideband RF IRM can suppress approximately 20dB of interference signal in 100MHz bandwidth when only interference signal exists. It also shows that when a 5G interference signal of -45dBm/100MHz and a satellite signal of -55dBm/40MHz exist simultaneously at a center frequency of 3.83GHz, about 15dB of 5G interference signal can be reduced in the frequency range covered by the satellite signal. The experimental results demonstrate that the wideband RF IRM can actively reduce the 5G interference signal on the satellite signal and can be used for the purpose of reducing the interference effect in a similar environment.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.149-150
• /
• 2008

u-Healthcare는 유비쿼터스와 원격의료 기술을 활용한 건강관리 서비스를 말한다. 목표는 삶의 질 향상 추에 있다. 경제수준이 향상되면서 삶의 질에 대한 중요성이 대두되고 있으며, 만성질환자 및 인성 질환의 예방 및 효율적 관리는 개인 및 사회적으로도 중요한 의의를 가진다고 할 수 있다. u-Healthcare 서비스를 제공하기 위해서는 언제 어디서나 이용사의 건강상태를 진단할 수 있는 생체계측기술이 필요하기 때문에 u-Healthcare 측정 모듈의 개발은 매우 중요하다. 본 논문에서는 개발한 모바일 연동 다기능 u-Healthcare 측정 모듈을 이응하여 심전도, 체지발, 호흡수, 체온 및 운동량 측정 등의 신호를 측정하였다. 측정된 신호를 Bluetooth 기반의 transceiver를 통해 u-Healthcare Center로 전송하며, Diagnostic Monitor를 통해 신호를 분석하여 건강상태를 모니터링 할 수 있는 검증모니터를 구현하였다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.3
• /
• pp.68-73
• /
• 2017

In this study, we design a low-cost test equipment for real-time image observation and transmission/reception distance test using 1m by 1.5m bang-pai kite. The image observation is made by using two servo motors to enable the camera to control the two axis attitude. The image observation equipment is hung on the string of a kite and the test is performed to observe the real time image. The transmission and reception distance test of the wireless RF transceiver module is conducted on the ground and in the air.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.682-684
• /
• 2007

This paper deals the application of sensor network system to fabricate wireless nodes. This node includes a CPLD(XC2C256), FPGA(XC3S1000) a RF module(Bim-433-F), a Hall Sensor and I also develop the CPLD(EPGA) controlling with Verilog-HDL using ISE. The network was consisst of a PC, a Sink node as a gateway, and three Sensor nodes. This sensor network can reaches 40 m with RF interface using by multi-path network.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.104.3-104
• /
• 2001

This paper develops a control approach to generic formation tasks of multiple mobile robots with inaccurate sensor information. Inaccurate sensor information means that all the robots have only local sensors which cannot accurately measure absolute distances and directions of objects. The control logic is developed considering generic situations in order to adapt to increasing number of robots which participate in the formation. Petri nets are used for modeling and design of the control logic, which can visualize the control models and make it easy to check the states of each robot. Physically homogenous mobile robots are designed and built to evaluate the developed logic. Each robot is equipped with eighteen infrared sensors and a UHF transceiver module. The developed control ...

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.73-74
• /
• 2006

In this paper, we designed, constructed and evaluated the system for the FTTH suited to a residence and apartment using CWDM-PON techniques. These systems have capacity to service at 100Mbps rate to 384 users in the same breath. Also, the services include the internet, CATV, IPTV and wireless LAN. In the case of wire network, the data could be transmitted by UTP cable and optical fiber and case of wireless one, the data transmitted using WLAN. The distance between the cental office and the user is 20km and the data rate is 100Mbps maximum. Of course, the optical network used just one fiber optical core. For the basic material, we obtained the characteristics of optical transceiver module, Mux/Demux and transmission qualities depends on the environment.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.323-326
• /
• 2003

본 논문은 무선 음성/영상 송수신용 RF모듈 설계 및 제작하였다. RF 주파수는 정보통신부에서 고시한 영상전송용 2410, 2430, 3450, 2470MHz 사용하였으며 IF 주파수는 479.5MHz를 사용하였다. 설계 및 제작된 RF 모듈은 FR-4 재질인 유전체 4.6, 두게 0.8mm, 양면구조의 기판을 사용하여 50mm x 40mm 크기로 제작되었다. 설계된 송신기 모듈은 ＋5V 단일전원으로 9±1dBm의 출력과 주파수허용편차 50×10/sup -6/이하, 스퓨리어스 발사강도 기본주파수의 평균전력보다 40dB이하의 성능을 만족하였다. 수신기 모듈은 +5V 단일 전원으로 -80dBm이하의 수신감도로 만족할만한 성능을 보였다.