• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.4
• /
• pp.43-47
• /
• 2024

This paper introduces a phased-array single-channel transceiver beamformer IC built using 65nm CMOS technology, covering the 8-16 GHz range and targeting the X and Ku bands for radar and satellite communications. Each signal path in the IC features a low noise amplifier (LNA), power amplifier (PA), phase shifter (PS), and variable gain amplifier (VGA), which allow for phase and gain adjustments essential for beam steering and tapering control in typical beamforming systems. Test results show that the phase-compensated VGA offers a gain range of 15 dB with 0.25 dB increments and an RMS gain error of 0.27 dB. The active vector modulator phase shifter delivers a 360° phase range with 2.8125° steps and an RMS phase error of 3.5°.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06d
• /
• pp.196-198
• /
• 2006

Ubiquitous Computing 시대가 도래하면서 USN은 다양한 분야에 적용되고 결국 지능형 유비쿼터스 센서 네트워크로 진화될 것이다. 센서네트워크는 네트워크를 구성하는 일정지역에 많은 수의 센서 노드가 배치되는 만큼 그에 따른 가장 큰 제약조건은 유한한 battery수명이다. 따라서 가용에너지가 작은 sensor node를 에너지 효율성을 고려하여 제작해서 적은 에너지 소모를 가지는 long-life sensor node를 만든다면 보다 현실적인 USN 실현에 가까이 갈수 있다. 여기에 우리는 DVS(Dynamic Voltage Sealing)라는 scheme을 기반으로 power-efficiency sensor node을 제작하였다. Variable Voltage을 CPU에 공급하거나 사용하지 않는 state에 있는 경우의 RF transceiver, clock, sensor등을 on/off control함으로서 성능향상을 가할 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.74-76
• /
• 2012

In order to design Transceiver/Receiver antenna with high gain in Ka band, Fresnel zone plate lend(FZPL) antenna is considered and analyzed. Physical optics is applied to demonstrate the FZPL. The FZPL is configured to 11 elements diffraction zones and drived at 20GHz. As a result, calculated received gain using PO method is 33.01dB.

• ETRI Journal
• /
• v.35 no.1
• /
• pp.1-6
• /
• 2013

In this paper, we present an implemented serial 40-Gb/s receiver optical subassembly (ROSA) module by employing a proposed TO-CAN package and flexible printed circuit board (FPCB). The TO-CAN package employs an L-shaped metal support to provide a straight line signal path between the TO-CAN package and the FPCB. In addition, the FPCB incorporates a signal line with an open stub to alleviate signal distortion owing to an impedance mismatch generated from the soldering pad attached to the main circuit board. The receiver sensitivity of the ROSA module measures below -9 dBm for 40 Gb/s at an extinction ratio of 7 dB and a bit error rate of $10^{-12}$.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.40-43
• /
• 1996

To design high quality products at low cost is one of very important task for engineers Design optimization for performances can be one solution in this task. This is robust design which has been proved effectively in many field of engineering design. In this paper, the concept of robust design is introduced and combined to fuzzy optimization and nonsingleton fuzzy logic system. The optimum parameter set points were obtained by the fuzzy optimization method and nonsingleton fuzzy logic system. These methods are applied to a filter circuit, a part of the audio circuit of mobile radio transceiver. The results are compared each other.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.711-716
• /
• 2003

This study considers the implementation issues of the inter-vehicle communication system for the vehicle platoon experiments via a testbed. The testbed, which consists of three scale vehicles and one RCS(remote control station), is developed as a tool for functions evaluation between simulation studies and full-sized vehicle researches in the previous study. The cooperative communication of the vehicle-to-vehicle or the vehicle-to-roadside plays a key role for keeping the relative spacing of vehicles small in a vehicle platoon. The static platoon control, where the number of vehicles remains constant, is sufficient for the information to be transmitted in the suitably fixed interval, while the dynamic platoon control such as merge or split requires more flexible network architecture for the dynamical coordination of the communication sequence. In this study, the wireless communication device and the reliable protocol of the flexible network architecture are implemented for our testbed, using the low-cost, ISM band transceiver and the 8-bit microcontroller.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.463-467
• /
• 2004

A FTS (Flight Termination System) is a system that resides in a flying object such as a rocket, unmanned airplane, helicopter, missile, etc., receives commands from ground stations or detects coordinates automatically, and accomplishes a destruction command in case the object does not follow the presumed orbit. In this paper, we address the implementation of a communication modem for the FTS modem. We present general theory, simulation results using Matlab, and several results on the implementation using VHDL.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.231-234
• /
• 2002

A transceiver for ADSL systems contains an interpolated combfilter, halfband filters, oversampling sigma delta modulator, a current steering DAC and an analog filler. The circuit complexity of the architecture makes it necessary to use behavioral models to determine the system features. For this reason, we need a specific behavioral simulation environment using the Matlab program. The Matlab is crucial for these circuits to be rapidly incorporated in larger systems, in particular in the context of mixed-signal-test schemes. Design trade-off among the blocks has also been discussed. The design methodology is based on behavioral design and CMOS process.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.129-132
• /
• 2000

In this paper, a 1.8㎓ low noise amplifier was designed and simulated using 0.2$\mu\textrm{m}$ Si CMOS process. Noise characteristics and s parameters were extracted for the 300$\mu\textrm{m}$ gate width and 0.25$\mu\textrm{m}$ gate length NMOS transistors. For high available power gain, each stage was designed cascode type. It revealed available power gain of 23.5dB, noise figure of 2.0dB, power consumption of 15㎽ at 2.5V. It was shown that designed low noise amplifier had good RF performance. Designed Si CMOS LNA is expected to be used for RF front-end in transceiver.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.34-41
• /
• 2003

In this paper, 60GHz band transmitter and receiver for wireless LAN are designed and implemented using the broband amplifier and mixer fabricated by standard 0.1${\mu}{\textrm}{m}$ MIMIC process of MINT. Output power and gain of the RF transmitter are 0 ㏈m and 1.7㏈, respectively. Noise figure and gain of the receiver are 4.2㏈ and l5.7dB, respectively. Considering the sensitivity and LOS test, this system can communicate with BER of below than 10$^{-6}$ at a distance more than 35m. DSSS, which is strong for concealment and disturbance, is adopted.