• 제목/요약/키워드: transceiver

검색결과 760건 처리시간 0.022초

400 MHz 대역의 송수신기 설계 및 제작 (Design and Fabrication of the Transceiver with 400MHz Bandwidth)

  • 허창우;최준수
    • 한국정보통신학회논문지
    • /
    • 제10권5호
    • /
    • pp.851-856
    • /
    • 2006
  • 본 논문에서는 단일 PLL을 사용하여 400MHz 대역의 트랜시버를 구현하였다. 일반적인 트랜시버의 경우, 송수신부에 각각 한 개의 PLL과 수신부에 2단의 믹서를 사용하여 구현되어진다. 이러한 구성 은 트랜시버의 가격과, 부피에 상당히 큰 영향을 미친다. 본 논문에서는 기존의 방식을 탈피하여 단일 PLL방식의 데이터 전송용 특정 소출력 무선기기의 송, 수신단의 회로설계, 제작 및 특성측정 연구를 하였다. 설계된 트랜시버의 주파수 대역은 424.7-424.95MHz이고, Low Side Injection방식을 사용하여 450KHz의 IF 주파수로 변환(Conversion)하였고, 반이중 (Semi duplex Communication) 통신방식, PLL Synthesized, 21 Channel, 12.5KHz Channel Bandwidth, FSK Modulation/Demodulation방식을 사용하였다.

60GHz대역 무선통신장애 해결을 위한 온도보상장치 개발 (The Development of the Temperature Compensation Equipment to minimize Error in the Wireless Transmission System at 60GHz Band)

  • 명병수;구성득
    • 한국산업융합학회 논문집
    • /
    • 제8권2호
    • /
    • pp.97-104
    • /
    • 2005
  • Usually, propagation attenuation of millimeter wave occurs by rainfall, snowfall, temperature, effect of pressure of air. In 60GHz wave band wireless communication network, temperature change becomes big factor of propagation loss department. Also, temperature change causes disturbance of 60GHz frequency at transceiver. In this study, we used 60GHz transceiver and found propagation loss of wireless path and operating frequency disturbance characteristics. In transceiver that there is no temperature compensated device, operating frequency of TX changed by 60.865GHz at temperature of $-5^{\circ}C$, and appeared by 60.730GHz when is $50^{\circ}C$. Therefore, operating frequency change width by temperature change are about 100MHz, greatly. But, in transceiver that there is temperature compensated device, operating frequency of TX changed by 60.830GHz at temperature of $-5^{\circ}C$, and appeared by 60.710GHz when is $50^{\circ}C$. Therefore, operating frequency change width by temperature change are about 20MHz. According to these result, we constructed between buildings examination wireless site for point to point wireless communication using 60GHz band transceivers who have do temperature compensated device, and investigated data transmission characteristics about ambient temperature change. Therefore, if use transceiver that have temperature compensated device, may overcome the wireless transmission error in 60GHz band wireless communication LAN networks despite of ambient temperature change.

  • PDF

Ka-Band의 집적화된 송수신 모듈 개발 (Integrated Transceiver Module development at Ka-Band)

  • 김완식;정연만;김계국
    • 한국컴퓨터정보학회논문지
    • /
    • 제11권5호
    • /
    • pp.267-272
    • /
    • 2006
  • 본 논문에서는 레이더에 사용할 수 있는 집적화, 소형화된 Ka-band용 송수신 모듈을 설계 및 제작하였다. 캐비티 형태의 공진기 및 MMIC의 VCO, 전력증폭기, 저잡음 증폭기, 주파수 혼합기와 직접 설계, 제작한 수동 소자들을 캐리어에 장착시키고, 이 캐리어들을 직접 송수신 모듈에 연결하여 결과적으로 출력 21dBm, 잡음지수 5dB까지의 성능을 보이면서 $50cm^*50cm^*20cm$의 소형화된 크기로 설계하였다. 개발된 FMCW 송수신 모듈을 이용하여 60m 이상 떨어져 있는 목표물을 탐지할 수 있는 비트 신호와 하늘 및 땅에 대한 특성을 분석할 수 있는 라디오미터 신호를 측정하였다. MMIC로 구성된 Ka-band의 송수신 모듈은 레이다와 라디오미터용으로 우수한 성능을 가짐을 확인할 수 있었다.

  • PDF

LTCC 기술을 적용한 집적화된 2.4 GHz 대역 무선 송수신 모듈 구현 (A Compact Integrated RF Transceiver Module for 2.4 GHz Band Using LTCC Technology)

  • 김동호;김동수;유종인;김준철;박종대;박종철
    • 한국전자파학회논문지
    • /
    • 제22권2호
    • /
    • pp.154-161
    • /
    • 2011
  • 본 논문에서는 저온 동시 소성 세라믹(Low Temperature Co-fired Ceramic: LTCC) 기술을 이용하여 집적화된 2.4 GHz 대역 무선 송수신 모듈을 구현하였다. 구현된 송수신 모듈은 무선 전단부(RF front-end)단과 송수신 IC칩 단으로 나누어진다. 무선 전단부단은 송수신을 선택하기 위한 SPDT 스위치와 스위치 동작을 위한 DC block 커패시터를 제외하고, 모두 LTCC 내부에 내장하였다. 제작된 무선 전단부는 8층으로 설계되었고, 크기는 $3.3\;mm{\times}5.2\;mm{\times}0.4\;mm$이며, 무선 전단부의 측정 결과는 시뮬레이션과 유사한 결과를 보인다. 송수신 IC 칩 단은 신호 및 전원 선로와 송수신 IC 칩으로 구성이 되어 있다. 제작된 무선 송수신 모듈은 내부 접지(inner GND) 3개 층을 포함한 9층으로 설계되었으며, 크기는 $12\;mm{\times}8.0\;mm{\times}1.1\;mm$이다. 최종적으로 2.4 GHz 대역 송수신 모듈의 송신 파워는 18.1 dBm이고, 수신 민감도는 -85 dBm의 특성으로 우수한 결과를 나타내었다.

효율적인 환자관리를 위한 링거액 감지기 및 송수신기 설계 (Ringer's solution detector and transceiver design for efficient manage of patient)

  • 송제호;이인상;이유엽
    • 한국산학기술학회논문지
    • /
    • 제17권9호
    • /
    • pp.45-50
    • /
    • 2016
  • 본 논문에서는 효율적인 환자관리를 위한 링거액 감지기 및 송수신기를 설계 하고자 한다. 링거액 감지기 및 송수신기는 메인 제어부, 링거액 감지부, 디스플레이 및 경고 발생부, 무선 송수신부, 전원 공급부로 구성된다. 메인 제어부에서는 GC89L591A0-MQ44IP의 CPU를 사용하여 전체 시스템을 제어하고 링거액 감지부는 수광부에 TSL235R-LF 포토다이오드, 투광부에 Water-Clear Type LED를 적용하였다. 또한, 디스플레이 및 경고 발생부는 7-세그먼트와 적색 LED를 적용하였으며 무선 송수신부는 NR-FPCX 모듈을 사용하여 데이터를 송수신하였다. 전원 공급부는 건전지를 사용하며 일반 전원이나 충전식 전원도 사용할 수 있도록 하였다. 따라서, 효율적인 환자관리를 위한 링거액 감지기 및 송수신기 설계에 대한 연구 결과 링거액이 포토다이오드에 의해 감지되었을 때 주파수는 11.95kHz이며, 감지되지 않았을 때는 9.6kHz로 측정되었다. 이때, 링거액의 감지 데이터가 링거액 송신기를 통해 출력되지 않을 때는 "0" 으로, 출력되었을 때는 해당 병실의 호실 정보가 링거액 수신기에 표시됨을 확인 할 수 있었다. 또한, 링거액 감지기의 사용전원은 신호가 감지되지 않을 때에는 Sleep 모드로 전환하여 배터리 절약 모드로 동작하며 링거액 송수신기는 대략 700m이내의 거리에서 무선 송수신이 가능하다.

470-MHz-698-MHz IEEE 802.15.4m Compliant RF CMOS Transceiver

  • Seo, Youngho;Lee, Seungsik;Kim, Changwan
    • ETRI Journal
    • /
    • 제40권2호
    • /
    • pp.167-179
    • /
    • 2018
  • This paper proposes an IEEE 802.15.4m compliant TV white-space orthogonal frequency-division multiplexing (TVWS)-(OFDM) radio frequency (RF) transceiver that can be adopted in advanced metering infrastructures, universal remote controllers, smart factories, consumer electronics, and other areas. The proposed TVWS-OFDM RF transceiver consists of a receiver, a transmitter, a 25% duty-cycle local oscillator generator, and a delta-sigma fractional-N phase-locked loop. In the TV band from 470 MHz to 698 MHz, the highly linear RF transmitter protects the occupied TV signals, and the high-Q filtering RF receiver is tolerable to in-band interferers as strong as -20 dBm at a 3-MHz offset. The proposed TVWS-OFDM RF transceiver is fabricated using a $0.13-{\mu}m$ CMOS process, and consumes 47 mA in the Tx mode and 35 mA in the Rx mode. The fabricated chip shows a Tx average power of 0 dBm with an error-vector-magnitude of < 3%, and a sensitivity level of -103 dBm with a packet-error-rate of < 3%. Using the implemented TVWS-OFDM modules, a public demonstration of electricity metering was successfully carried out.

An Architecture of Reconfigurable Transceiver for OFDM/TDD based Portable Internet Service System

  • Jung Jae Ho;Kim Jun Hyung;Kim Sung Min;Choi Hyun Chul;Lee Kwang Chun
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2004년도 학술대회지
    • /
    • pp.667-670
    • /
    • 2004
  • In this paper, we have presented the improved IF transceiver architecture and the implementation and experimental results on re-configurable transceiver based on digital IF for multiple wideband OFDM/TDD base stations for high-speed portable internet-service in which is issued Korea. The implemented IF transceiver has been designed to support multiple frequency allocations and multiple standards by only modifying the programmable software not its hardware like as the software-defined-radio concept. Also, the digital complex quadrature modulation technique has been used for the digital IF transmitter, which is able to combine multiple frequency bands in digital processing block not RF block and to reject the image frequency signals. And the bandpass sampling technique has been used for the digital IF receiver to reduce the sampling rate of ADC. This paper has shown the experiment results on the frequency response and constellation on the base-station implemented using the modified IEEE 802.16a/e physical layer channel structure based on OFDM/TDD.

  • PDF

400 MHz ISM 대역 데이터 통신용 GFSK 송·수신기 설계 및 제작 (Design and Fabrication of 400 MHz ISM-Band GFSK Transceiver for Data Communication)

  • 이행수;홍성용;이승민
    • 한국전자파학회논문지
    • /
    • 제17권2호
    • /
    • pp.198-206
    • /
    • 2006
  • 데이터 통신용 400 MHz ISM 대역 송${\cdot}$수신기를 설계하였다. 전파 법규의 8.5 kHz 이하 점유 주파수 대역폭을 만족하기 위해 GFSK 변조 방식을 이용하였고, 8051 CPU에 통신 프로토콜을 이식하여 데이터를 송${\cdot}$수신하였다. 제작된 송${\cdot}$수신기는 ${\pm}3\;kHz$이하의 주파수 변조도와 20 dB의 SINAD에서 -107 dBm의 감도를 나타내었으며, 인접 채널 평균 전력을 -60 dBc 이하로 전파 법규를 만족하였다. 제작된 송수신기의 BER 특성은 입력 신호 전력이 -110 dBm에서 $1.8{\times}10^{-3}$, -106 dBm 이상일 경우 0으로 측정되었다.

변조된 DFB 레이저를 이용한 광 송수신기의 SMSR 수율 향상에 관한 연구 (The Research on SMSR Yield Improvement of the Optical Transceiver Using Modulated DFB Laser)

  • 권윤구;김창봉
    • 한국산학기술학회논문지
    • /
    • 제12권5호
    • /
    • pp.2285-2290
    • /
    • 2011
  • 본 논문은 광 통신용 송수신기의 핵심 부품인 DFB 레이저의 SMSR 수율 향상에 관한 연구이다. 광 송수신기는 주로 1310, 1490 및 1550 nm 파장의 DFB 레이저를 사용하고 있는데, 변조된 DFB 레이저의 SMSR 특성에 따라 전송효율이 결정되므로, 변조된 DFB 레이저의 SMSR 특성을 확보하는 것이 매우 중요하다. 하지만, 대량 생산시변조된 상태의 광 송수신기 제품이 SMSR 사양에 만족하기가 어려울 경우, 불량률이 높아지는데, 불량률을 감소시키기 위해 광 송수신기의 광 파워 출력과 소광비를 조정하여 SMSR을 개선할 수 있는 연구를 하였고, 이를 실제 적용하여 SMSR 불량률을 감소시켰다.

Independent Component Analysis Based MIMO Transceiver With Improved Performance In Time Varying Wireless Channels

  • Uddin, Zahoor;Ahmad, Ayaz;Iqbal, Muhammad;Shah, Nadir
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권7호
    • /
    • pp.2435-2453
    • /
    • 2015
  • Independent component analysis (ICA) is a signal processing technique used for un-mixing of the mixed recorded signals. In wireless communication, ICA is mainly used in multiple input multiple output (MIMO) systems. Most of the existing work regarding the ICA applications in MIMO systems assumed static or quasi static wireless channels. Performance of the ICA algorithms degrades in case of time varying wireless channels and is further degraded if the data block lengths are reduced to get the quasi stationarity. In this paper, we propose an ICA based MIMO transceiver that performs well in time varying wireless channels, even for smaller data blocks. Simulation is performed over quadrature amplitude modulated (QAM) signals. Results show that the proposed transceiver system outperforms the existing MIMO system utilizing the FastICA and the OBAICA algorithms in both the transceiver systems for time varying wireless channels. Performance improvement is observed for different data blocks lengths and signal to noise ratios (SNRs).