• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1631-1635
• /
• 2011

To consider dynamic magnification effect at the static design stage, impact load factor is applied to design load. Current impact load factor adopted EUROCODE without verification while Japan suggested impact load factor including velocity of high-speed train throughout theoretical and experimental studies. On the purpose of evaluate current impact load factor, this study investigated the calculation of impact load factor from dynamic response of running train.

• 한국철도학회논문집
• /
• 제6권4호
• /
• pp.239-245
• /
• 2003

In this paper, the track impact factor of conventional line was evaluated using the data for wheel load measured in field and the properties of current operating trains. The equation for track impact factor was presented through the statistical analysis of variational ratio in wheel load and compared with other design equations in domestic and foreign countries. A review on the safety of track system in conventional line was made from the relationship between the velocity and the corresponding impact factor. It was found that the impact factor from the proposed equation is a little less than the values from the equations adopted in both AREA and domestic railway, while it is same as the equation for continuous welded rail(CWR) in Japan. Therefore it could be said that the track satisfies a criteria for dynamic load caused by the train and the corresponding level of safety is guaranteed for dynamic load of the train

• Structural Engineering and Mechanics
• /
• 제65권6호
• /
• pp.741-750
• /
• 2018

The aim of this study was to investigate the mechanical responses of a high-speed railway shield tunnel subjected to impact by a derailed train, with emphasis on the protective effect of the secondary lining. To do so, the extended finite element method was used to develop two numerical models of a shield tunnel including joints and joint bolts, one with a cast-in-situ concrete secondary lining and one without such a lining. The dynamic responses of these models upon impact were analyzed, with particular focus on the distribution and propagation of cracks in the lining structures and the mechanical responses of the joint bolts. The numerical results showed that placing a secondary lining significantly constricted the development of cracking in the segmental lining upon the impact load caused by a derailed train, reduced the internal forces on the joint bolts, and enhanced the safety of the segmental lining structure. The outcomes of this study can provide a numerical reference for optimizing the design of shield tunnels under accidental impact loading conditions.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1653-1661
• /
• 2008

A trial run of locally-developed tilting train has been in process on Chungbuk line since the test vehicle was first produced. For the system stabilization, interface verification among the systems including track, structure, catenary and signaling system, not to mention the rolling stock, is very crucial. In the area of wayside structure, the stability of track structure and train run shall be evaluated through the review of impact by increased speed by developed train on track structure. The study thus was intended to evaluate the impact on track while a tilting train is running the conventional line(ballast track), which is vulnerable to accelerated train speed. The evaluation of tilting train test running the part of Honam line was conducted to identify the impact on existing track performance by tilting train. To identify the performance of each part of track components while tilting train and high speed train were running the existing line, wheel load, rail bending stress, vertical displacement of rail and sleeper were compared so as to evaluate the expected impact by tilting train for improving the train speed.

• 한국지반환경공학회 논문집
• /
• 제24권12호
• /
• pp.39-45
• /
• 2023

본 논문에서는 3차원 수치해석을 통해 철도 노반에 인접한 굴착공사 시 궤도의 틀림을 분석하였다. 철도 노반에 인접한 굴착 공사는 열차 주행에 영향을 미칠 가능성이 높아 공사 시 인접 구조물의 안정성 및 영향성 검토를 필수로 수행하고 있지만, 그럼에도 불구하고 공사에 따른 침하 및 궤도틀림이 지속적으로 보고되고 있다. 굴착공사로 인한 지하수위, 지반의 응력 상태 변화 등은 인접 굴착 공사에 따른 구조물의 침하와 궤도틀림의 원인으로 지적되고 있다. 따라서, 본 연구에서는 인접 굴착 공사 시 궤도 틀림을 유발하는 인자를 변수로 고려하여 수치해석을 수행하였으며 운행 열차를 모사하기 위해 KRL-2012 표준 열차하중을 적용하였다. 분석 결과, 열차하중의 위치, 굴착지점과의 거리가 궤도틀림에 큰 영향을 미치는 것으로 나타났으며, 열차 하중이 작용할 때 궤도 틀림이 크게 발생하는 것으로 나타났다. 지하수위의 영향은 크지 않은 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제20권2호
• /
• pp.155-164
• /
• 2020

In recent years, the stability, safety and comfort of trains has received increased attention. The mechanical characteristics and differential settlement of the foundation are the main problems studied in high-speed railway research. The mechanical characteristics and differential settlement of the foundation are greatly affected by the ground treatment. Additionally, the effects of train load and earthquakes have a great impact. The dynamic action of the train will increase the vibration acceleration of the foundation and increase the cumulative deformation, and the earthquake action will affect the stability of the substructure. Earthquakes have an important practical significance for the dynamic analysis of the railway operation stage; therefore, considering the impact of earthquakes on the railway substructure stability has engineering significance. In this paper, finite element model of the CFG (Cement Fly-ash Gravel) pile + cement-soil compacted pile about composite foundation is established, and manual numerical incentive method is selected as the simulation principle. The mechanical characteristics and differential settlement of CFG pile + cement-soil compacted pile about composite foundation under train load are studied. The results show: under the train load, the neutral point of the side friction about CFG pile is located at nearly 7/8 of the pile length; the vertical dynamic stress-time history curves of the cement-soil compacted pile, CFG pile and soil between piles are all regular serrated shape, the vertical dynamic stress of CFG pile changes greatly, but the vertical dynamic stress of cement-soil compacted pile and soil between piles does not change much; the vertical displacement of CFG pile, cement-soil compacted pile and soil between piles change very little.

• Smart Structures and Systems
• /
• 제31권6호
• /
• pp.585-599
• /
• 2023

Field monitoring techniques offer an attractive approach for understanding bridge behavior under in-service loads. However, the investigations on bridge behavior under high-speed train load using field monitoring data are limited. The focus of this study is to explore the structural behavior of an in-service long-span steel truss arch bridge based on field monitoring data. First, the natural frequencies of the structure, as well as the train driving frequencies, are extracted. Then, the train-induced bearing displacement and structural strain are explored to identify the effects of train loads and bearings. Subsequently, a sensitivity analysis is performed for the impact factor of strain responses with respect to the train speed, train weight, and temperature to identify the fundamental issues affecting these responses. Additionally, a similar sensitivity analysis is conducted for the peak acceleration. The results indicate that the friction force in bearings provides residual deformations when two consecutive trains are in opposite directions. In addition, the impact factor and peak acceleration are primarily affected by train speed, particularly near train speeds that result in the resonance of the bridge response. The results can provide additional insight into the behavior of the long-span steel truss bridges under in-service high-speed train loads.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 봄 학술발표회 논문집
• /
• pp.111-118
• /
• 1996

Dynamic load models which show the practical behavior of truss bridge subjected to moving train load are presented. Three basically approaches are available for evaluating structural response to dynamic effects : moving force, moving mass, and influence moving force and mass. Simple warren truss bridge model is selected in this research, and idealized lumped mass system, modelled as a planar structure. In the process of dynamic analysis, the uncoupled equation of motion is derived from simultaneous equation of the motion of truss bridge and moving train load. The solution of the uncoupled equations of motion is solved by Newmark-$\beta$ method. The results show that dynamic response of moving mass and static analysis considering the impact factor specified in the present railway bridge code was nearly the same. Generally, the dynamic response of moving force is somewhat greater than that of moving mass. The dynamic load models which are presented by this study are obtained relatively adequate load model when apply to a truss bridge.

• 문화기술의 융합
• /
• 제6권3호
• /
• pp.443-448
• /
• 2020

본 연구에서는 영종대교를 구성하고 있는 교량형식(트러스교, 현수교)별 열차종류(AREX, AREX Express, KTX, KTX-Sancheon) 및 열차속도가 강직결 궤도구조의 동적거동에 미치는 영향을 분석하고자 현장측정을 수행하였다. 현장측정결과를 바탕으로 궤도충격계수 및 열차주행안정성(탈선계수, 윤중감소율, 레일두부횡변위)을 국내, 외 관련기준 및 법규와의 비교하여 영종대교 교량상 강직결 궤도구조의 동적거동에 영향을 미치는 열차하중 및 속도의 효과를 분석하였다. 연구결과, 영종대교 교량형식별 궤도의 동적거동의 차이는 뚜렷하지 않으나 열차하중의 크기에 보다 직접적인 영향을 받는 것으로 분석되었다. 따라서 향후 열차속도 증가에 따른 궤도충격계수의 증가와 이에 따른 궤도부담력의 증가수준을 감안한 영종대교 강직결 궤도구조의 보강방안 수립이 필요할 것으로 판단된다.

• 한국철도학회논문집
• /
• 제10권6호
• /
• pp.692-700
• /
• 2007

국내에서 개발된 한국형 틸팅열차는 현재 시제차량 제작을 마치고, 충북선을 시작으로 시운전 시험이 단계적으로 진행되고 있다. 시운전 시험에서는 한국형 틸팅열차의 시스템 안정화를 위해 차량 외에 궤도, 구조물, 전차선, 신호 등 각 시스템 상호간의 인터페이스 검증이 필요하며, 선로구축물 분야에서는 개발차량의 증속이 궤도구조에 미치는 영향을 비롯한 궤도부담력 검토를 통해 궤도구조의 안정성과 주행안정성 평가가 수행되어야 한다. 따라서 본 연구에서는 틸팅차량이 기존선 선로중 취약개소인 곡선부를 증속할 때 궤도에 미치는 영향을 검토하고자, 현재 시운전 시험이 진행되고 있는 충북선 및 호남선 구간 중 일부 선호를 대상으로 틸팅차량 주행이 기존선 궤도성능에 미치는 영향을 분석하였다. 틸팅열차, 고속열차 및 일반열차(무궁화, 화물)가 기존선 주행시 궤도각부의 거동특성을 파악하기 위해 윤중, 횡압, 레일 휨응력, 레일 수직 횡변위, 침목 수직변위 등을 측정하여 비교 분석함으로써 향후 기존선 속도향상을 위해 투입될 틸팅차량이 궤도에 미치는 영향을 평가하였다.