• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1780-1784
• /
• 2015

Traditional IP routing, see only the Destination Address When Forwarding Layer 3 routing and exchange information and Destination-Based Routing Lookup is required for all Hop. Thus, all routers Full Internet routing information, the route information of more than about 120,000 may require. Therefore, the router configuration, which can be dispersed in the environment, the traffic load is required in accordance with this congestion. In this study, a unique characteristic of the Internet in the environment of an existing network Best Effect for QoS guarantee and hardware high speed switching of large multimedia data transmitted using a Labeling for forwarding a packet environment configuration is required. Video Stream Broadcast Transport Labeling rather than in much of the higher performance of the multi-step policy to most of the Video Stream Packet deulim was fixed to Labeling Header Format proposes a method of applying an effective QoS policy to a more simplified policy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6B
• /
• pp.443-452
• /
• 2012

In Mobile Ad-hoc Networks, previous routing protocols classified into proactive and reactive approach respectively have pros and cons under the use of applications and environment. Moreover, to integrate their advantages in case by case, hybrid approach is consistently researched, and Zone Routing Protocol (ZRP) was motivating many recent hybrid protocols. ZRP uses proactive routing to the node located within the zone defined by the specific number of hops, while it uses reactive routing to other nodes. However, in ZRP, because proactive routing is applied only within the zone defined by the number of hops, the zone is formed regardless of whether real data communication occurred frequently or not. In this paper, we propose a new hybrid routing scheme which employs the zone method but forms customized zone considering traffic load and number of hops, by a new decision method named Dynamic Zone Decision (DZD). Additionally, we analyze the performance of the proposed scheme, comparing with the previous proactive, reactive, and hybrid routings.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4B
• /
• pp.584-591
• /
• 2010

In this paper, we propose an adaptive Relay Station (RS) coverage extension scheme for the Mobile Multi-hop Relay (MMR) systems. The MMR system with a non-transparent mode RS can be used to extend BS coverage using the remaining capacity of the Base Station(BS). Thus, the call blocking may occur in RSs when calls arrive very often in Multi-hop Relay Base Station (MR-BS). In the proposed scheme, RSs can be connected to the neighbor MMR system as the 2ndtier RSs if the neighbor MMR system services low traffic load when calls are frequently arrived in MR-BS or RSs. By doing so, the MMR system can accept a new call without call blocking. Through numerical results, we demonstrate that the proposed scheme outperforms the conventional MMR system in terms of the throughput and call blocking probability of MMR systems.

• Journal of KIISE
• /
• v.44 no.11
• /
• pp.1219-1230
• /
• 2017

Real-time streaming services over the Internet have increased with the explosive growth of the various mobile platforms, with a focus on smart phones, and the demand for them is growing. In addition, the bandwidth occupied by the streaming services over the Internet had already surpassed 50% in 2010. Because of the shortage of network bandwidth for multimedia services traffic, restrictions on quality and capacity will become more and more serious. CCN is a future Internet architecture that improves how existing host-based Internet architecture handles content-oriented structure, but it is designed for the transmission of general contents and is not suitable for transmitting real-time streaming contents. In this paper, we focus on the inefficient aspects of CCN and propose a hierarchical grade-based scheme for real-time service for a more efficient environment in real-time streaming services. Experiments have shown better performance in terms of bandwidth, network load, and reliability.

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.55-65
• /
• 2010

We present a method for increasing network lifetime without link failure due to lack of battery capacity of nodes in wireless ad-hoc networks with low mobility. In general, a node with larger remaining battery capacity represents the one with lesser traffic load. Thus, a modified AODV routing protocol is proposed to determine a possible route by considering a remaining battery capacity of a node. Besides, the total energy consumption of all nodes increase rapidly due to the huge amount of control packets which should be flooded into the network. To reduce such control packets efficiently, a source node can store information about alternative routes to the destination node into its routing table. When a link failure happens, the source node should retrieve the route first with the largest amount of the total remaining battery capacity from its table entries before initiating the route rediscovery process. To do so, the possibility of generating unnecessary AODV control packets should be reduced. The method proposed in this paper increases the network lifetime by 40% at most compared with the legacy AODV and MMBCR.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.691-698
• /
• 2015

In the area of high traffic volume, such as expressway across large cities, the amount of nitrogen oxides (NOx) emitted into the atmosphere as air pollution can be significant since NOx gases are the major cause of smog and acid rain. Recently, the importance of NOx removal has arisen in the world. Titanium dioxide ($TiO_2$), that is one of photocatalytic reaction material, is very efficient for removing NOx. Therefore, application of $TiO_2$ concrete is a good alternative in order to remove NOx which is a main cause of air pollution. This experimental study aimed to evaluate the long-term performance of $TiO_2$ concrete such as NOx removal efficiency due to performance period and environmental resistance for application of road structures. It was found that the $TiO_2$ is reasonable applicable on the road structure because $TiO_2$ concrete has a long-term performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.311-317
• /
• 2018

The new asphalt surface reinforcement method (ASRM) is one of the preventive maintenance methods in asphalt concrete pavements. The adhesion performance of new ASRM satisfied the standard of non-slip pavement and bridge waterproofing materials. As a results of durability tests (as wheel load, rolling bottle and UV resistance test), the new ASRM showed sufficient resistance to traffic and environmental loads. The waterproof and chemical resistance tests of new ASRM were conducted to evaluate whether the pavement could be protected from water and chemicals and the performances of new ASRM were satisfactory. Furthermore, the new ASRM demonstrated some rejuvenation effects due to its toughness increases in recycled asphalt concrete mixture by 5% compared to the conventional hot mix asphalt mixture using reclaimed asphalt pavement. In conclusion, the new ASRM was evaluated to protect the asphalt concrete pavement and increase the lifetime.

• The Journal of the Korea Contents Association
• /
• v.6 no.1
• /
• pp.72-79
• /
• 2006

Recently, a MMORPG(Massively Multi-play Online Role Playing Game) has built distribute server by Seamless world. This paper proposes an efficient collision detection method. DLS is used to dynamically adjust spatial subdivisions in each the boundary regions of distribute server We use an index table to effectively utilize the relationships between in the nodes and can perform the collision detection efficiently by reconstructing nodes of the tree. Also, we maintain the information for the boundary region to efficiently detect the collections and adjust the boundary regions between distributed servers by using DLS. As the DLS uses pointers, the information for each server is not needed and the boundary regions between the distributed servers are efficiently searched. Using node index points, the construction table can be made to find between ray and neighborhood node, In addition, processes for Network traffic reduce because a copy of the boundary regions is not needed when a object moves with realtime.

• International Journal of Highway Engineering
• /
• v.14 no.3
• /
• pp.59-67
• /
• 2012

This study presents the evaluation of the patching materials that are used to repair the distress of asphalt pavement. Four kinds of patching materials currently used in practice were tested in both laboratory and field. The laboratory tests included the dry and soaked Marshall stability test, indirect tensile test, wheel tracking test and adhesive strength between the asphalt pavement and the repairing material was tested as a performance test. The field study was conducted using the slab samples placed on the location of vehicle tire passing and the performance of the repairing materials were investigated as passing the traffic load. The result of the laboratory tests were satisfied with the current design criteria and material standard except for water-immersion stability. Type C patching material showed the highest adhesive shear strength among the patching materials tested. However, the mature distress, such as rutting and stripping were monitored after construction in 10 days. It was found that performance of patching material is lack of quality behavior when they were applied in the field and required to develop and applu to prevent the mature distress of the current patching materials.

• Tunnel and Underground Space
• /
• v.27 no.6
• /
• pp.387-392
• /
• 2017

Recently, road cave-ins, also referred to as ground sinking, have become a problem in urban environments. Public utility facilities such as sewage pipelines, communications pipes, gas pipes, power cables, and other types of underground structures are installed below the roads. It was reported that cave-ins are caused by the aging and lack of proper maintenance of underground facilities, as well as by construction problems. A road cave-in is first initiated by the formation of cavities typically induced by the breakage of underground pipelines. The cavities then grow and reach the base of the pavement. The traffic load applied at the surface of the roads causes an abrupt plastic deformation. This type of accident can be considered as a type of disaster. A road cave-in can threaten both human safety and the economy. It may even result in the loss of human life. In the city of Seoul, efforts to prevent damage before cave-ins occur have been prioritized, through a method of discovering and repairing joints through the 3D GPR survey.