• International Journal of Highway Engineering
• /
• v.17 no.3
• /
• pp.59-68
• /
• 2015

PURPOSES : This study suggests the application of glow line marking technology for reducing traffic accidents at nighttime. METHODS : In this study, using a statistical analysis, we analyzed the characteristics of traffic accidents occurring at nighttime. Next, the strength, weakness, opportunity, and threat (SWOT) factors were derived based on a current-status analysis of glow line marking technology and road environments. An SO strategy, ST strategy, WO strategy, and WT strategy were established in accordance with the four SWOT factors. RESULTS : This study suggests that the following strategies should be promoted to apply glow line marking technology to a road environment: 1) an activation strategy for the technological development of glow line markings for a new paradigm in reducing traffic accidents, 2) a benefit enhancement strategy applying glow line marking technology in places where nighttime traffic accidents frequently occur, 3) a strategy for the expansion of glow line marking by replacing streetlights, and 4) a strategy for enhancing road applications through the development of various line marking methods in consideration of both performance and costs. CONCLUSIONS : The application of glow line markings in a road environment can contribute to a reduction of traffic accidents at nighttime, and aid energy savings from the replacement of streetlights.

• Journal of the Korean Society for Railway
• /
• v.17 no.2
• /
• pp.140-147
• /
• 2014

Line planning is an important step to determine the optimal frequencies of trains given the forecasted demand for each train type. The main input data for line planning is the leg traffic demand which can be derived using suitable traffic assignment models. However most assignment models require a line plan, in other words, train frequencies or headways, so that inconsistent results just by the procedural approach to find an optimal line plan after determining leg traffic can be avoided. This paper suggests a unified model that can consider the traffic assignment and line planning, simultaneously. We further provide an elaborated approximation algorithm and, finally, provide experimental results determined for the Korean railway network.

• International Journal of Highway Engineering
• /
• v.9 no.1 s.31
• /
• pp.29-38
• /
• 2007

The Korea National Police Agency launched a campaign to encourage drivers in stop line observance and to discourage stop line violation by intensively imposing fines. It was to increase stop line observance of drivers and thus traffic safety. According to statistics, the stop line observance rate was increased over 80 % of drivers during the campaign but regressed to the past after the campaign. This paper delivers the effect of the location of traffic signal lights on driver's stop line observance and develops a guideline to improve highway traffic environment in long terms. Statistical tests conducted based on field data showed that the drivers' stop line observance increases when traffic signal lights are closely installed from a stop line. It was proposed from the study that traffic signal lights be installed $10{\sim}20m$ from a stop line.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.899-902
• /
• 2007

The KTX train which brings April 2004 high-speed railroad commerce operation time is operated currently Kyungbu line Seoul-Gwangmyeong-Daejeon-Dongdaegu-Pusan and Honam line Youngsan-Gwangmyeong-Seodaejeon-Kwangju/Mokpo. The high-speed railroad opening to traffic after KTX train interior noise follows in railway line quality change and it is changing together. From the research which it sees until opening to traffic after present time of the KTX vehicle it executed an interior noise quality change from Kyungbu line.

• Journal of Navigation and Port Research
• /
• v.29 no.4
• /
• pp.313-318
• /
• 2005

Usually marine traffic survey has been conducted by some methods like an ocular observation using portable RADAR, a questionnaire, etc. But these should have expended a lot of manpower and expenses. In this paper, we have developed new observation module which could capture the RADAR image using PC camera simply, and allowed as to track targets on the PC monitor directly. And it has been programmed to make a database of RADAR image, target's track and information, and analyze the marine traffic tendency in various ways like vessel number crossed over gate line, vessel's velocity distribution in gate line, traffic density distribution, etc. We have confirmed that this module could observe and analyze the marine traffic efficiently and economically through several on-the-spot experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1846-1850
• /
• 2005

This paper presents a constrained-based routing (CBR) algorithm called, Dynamic Possible Path per Link (D-PPL) routing algorithm, for MultiProtocol Label Switching (MPLS) networks. In MPLS on-line routing, future traffics are unknown and network resource is limited. Therefore many routing algorithms such as Minimum Hop Algorithm (MHA), Widest Shortest Path (WSP), Dynamic Link Weight (DLW), Minimum Interference Routing Algorithm (MIRA), Profiled-Based Routing (PBR), Possible Path per Link (PPL) and Residual bandwidth integrated - Possible Path per Link (R-PPL) are proposed in order to improve network throughput and reduce rejection probability. MIRA is the first algorithm that introduces interference level avoidance between source-destination node pairs by integrating topology information or address of source-destination node pairs into the routing calculation. From its results, MIRA improves lower rejection probability performance. Nevertheless, MIRA suffer from its high routing complexity which could be considered as NP-Complete problem. In PBR, complexity of on-line routing is reduced comparing to those of MIRA, because link weights are off-line calculated by statistical profile of history traffics. However, because of dynamic of traffic nature, PBR maybe unsuitable for MPLS on-line routing. Also, both PPL and R-PPL routing algorithm we formerly proposed, are algorithms that achieve reduction of interference level among source-destination node pairs, rejection probability and routing complexity. Again, those previously proposed algorithms do not take into account the dynamic nature of traffic load. In fact, future traffics are unknown, but, amount of previous traffic over link can be measured. Therefore, this is the motivation of our proposed algorithm, the D-PPL. The D-PPL algorithm is improved based on the R-PPL routing algorithm by integrating traffic-per-link parameters. The parameters are periodically updated and are dynamically changed depended on current incoming traffic. The D-PPL tries to reserve residual bandwidth to service future request by avoid routing through those high traffic-per-link parameters. We have developed extensive MATLAB simulator to evaluate performance of the D-PPL. From simulation results, the D-PPL improves performance of MPLS on-line routing in terms of rejection probability and total throughput.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.4 no.2
• /
• pp.103-111
• /
• 2000

The objectives of the study are to know the strain distribution and modal dynamic behaviour of steel bridge girders by actual traffic load. The live load effect depends on many parameters including the span length, gross vehicle weight, axle weight, axle configuration so on. For the estimation of static and dynamic characteristic, strain data caused by moving loads and traffic characteristics of passing vehicle under actual traffic load have measured using Bridge Weigh in Motion. To confirm the reliability of BWIM system, strain data measured using the $120{\Omega}$ strain gauge under the same condition. It is considered that the data acquired from BWIM system have reliability through the analysis and comparison between stress measured by strain data from BWIM and computed by FEM. Additionally according to the measured strain data of up-line and down-line on the highway, the up-line bridge grows more faster than the down-line bridge and girder 4 and 5 carry more load when vehicles pass the inner line and girder 2 and 3 does when vehicles pass the outer line as this case(the bridge composed with 5 girders).

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.446-452
• /
• 2018

A traffic route is an area associated with high risk for accidents due to the flow of heavy traffic. Despite this concern, most studies related to traffic focus solely on traffic distribution. Therefore, there is a need for studies investigating the characteristics of ships' routes and traffic patterns. In this study, an investigation was carried out to analyze the traffic distribution and pattern in 3 major traffic routes for 3 days. For the purpose of the study, based on the prevailing traffic conditions, the route was divided into 10 gate lines. The ships passing through the lines were also classified into either small, medium and large. ND-K-S (normal distribution, kurtosis, and skewness) test was carried out for the traffic distribution at each gate line based on the information analyzed on each traffic route. The analysis of the results obtained from the ND test showed that large vessels have normal distribution, medium sized vessels have satisfied normal distribution in one-way route only while small sized vessels do not have normal distribution. According to the result obtained from the K-S test, normal traffic pattern shows a significant difference between two-way route and one-way route. Results obtained from the K test result shows that in the case of one-way route, vessels have a traffic pattern using a wide range on traffic route. Further analysis shows that vessels concentrate on one side of route in case of two-way route. Results obtained from the S test show that, in case of one-way route, vessels have a normal traffic pattern according to center line. However, analysis pf the results shows that vessels are shifted to the right side of route in case of two-way route. Despite these findings, it should be noted that this study was carried out in only 3 ports, therefore there is need for investigation to be carried out in various routes and conditions in future studies.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.527-530
• /
• 1995

In this paper, traffic modeling and control design was considered to analyze and improve the stability of train diagram in the open-loop Metro line. A complete discrete-event traffic model describing the natural instability of open-loop metro line is analyzed. The traffic stability properties are introduced and easy-to-implement state feed back traffic control algorithms are designed, which satisfied with system stability.

• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.111-118
• /
• 2014

PURPOSES : This study performs fundamental research on ramp-metering design criteria. METHODS : We carefully review previous studies in terms of ramp-metering design criteria and then consider applicability in Korea. For this, traffic simulation model is employed to analyze actual effect according to specific location of stop-line when implementing ramp-metering. RESULTS : When a stop-line moving forward with a 50m interval, travel speed at mainline relative to current stop-line location tends to decrease. However, traveling speed at approach roads increase about 5~18% under the same condition. When a stop-line location moving backward with a 50m interval, mainline travel speed increase approximately 17~32% whereas traveling speed at approach roads decrease. All cases are compared with the current stop-line location. CONCLUSIONS : We believe that both cases are useful with respect to freeway management. For example, moving forward a stop-line case can be used management for queuing area at ramp section and approach roads. Moving backward a stop-line case can be used for traffic control, focusing on mainline of freeways.