• Journal of Biosystems Engineering
• /
• v.33 no.5
• /
• pp.355-361
• /
• 2008

As agricultural machinery has become larger and tillage practices have changed in recent decades, compaction as a result of wheel traffic and tillage has caused increasing concern. If strategies to manage compaction, such as deep tillage, could be applied only where needed, economic and environmental benefits would result. For such site-specific compaction management to occur, compacted areas within fields must be efficiently sensed and mapped. We previously developed an on-the-go soil strength profile sensor (SSPS) for this purpose. The SSPS measures within-field variability in soil strength at five soil depths up to 50 cm. Determining the variability structure of SSPS data is needed for site-specific field management since the variability structure determines the required intensity of data collection and is related to the delineation of compaction management zones. In this paper, soil bin data were analyzed by a spectral analysis technique to determine the variability structure of the SSPS data, and to investigate causes and implications of this variability. In the soil bin, we observed a repeating pattern due to soil fracture with an approximate 12- to 19-cm period, especially at the 10-cm depth, possibly due to cyclic development of soil fracture on this interval. These findings will facilitate interpretation of soil strength data and enhance application of the SSPS.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.585-590
• /
• 2017

In this paper, a low power of safety oriented sidewalk block was implemented using dimming technology using LED and illuminance sensor to prevent glare by high - intensity light source and prevent night traffic accident. The dimming system of this paper used a light bulb color with less fatigue to prevent glare and consumed 6.10Wh power. Also, it is confirmed that the power saving is about 56.9% when compared with the existing system.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.3
• /
• pp.61-68
• /
• 1983

In this paper various aspects of statistical maltiplexing of data signs have been investigated. A queueing model with finite waiting room and batch poisson arrivals is studied assuming that data signals are transmitted at a constant rate. Using traffic intensity and average burst length as parameters, overflow probabilities and expected queueing delay due to buffering are obtained. Also, a real system model of a statistical multiplexer that can be directly used in micro-programmed hardware realization is proposed. To examine the performance of the system, computer simulation has been done at various conditions. The results obtained can be used in designing a buffer efficiently.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.69-76
• /
• 2010

The segmentation of moving object in video sequence is a core technique of intelligent image processing system such as video surveillance, traffic monitoring and human tracking. A typical method to segment a moving region from the background is the background subtraction. The steps of background subtraction involve calculating a reference image, subtracting new frame from reference image and then thresholding the subtracted result. One of famous background modeling is Gaussian mixture model (GMM). Even though the method is known efficient and exact, GMM suffers from a problem that includes false pixels in ROI (region of interest), specifically shadow pixels. These false pixels cause fail of the post-processing tasks such as tracking and object recognition. This paper presents a method for removing false pixels included in ROT. First, we subdivide a ROI by using shape characteristics of detected objects. Then, a method is proposed to classify pixels from using histogram characteristic and comparing difference of energy that converts the color value of pixel into grayscale value, in order to estimate whether the pixels belong to moving object area or shadow area. The method is applied to real video sequence and the performance is verified.

• Journal of KIBIM
• /
• v.6 no.3
• /
• pp.42-48
• /
• 2016

Structural members are designed to maintain the load-carrying capacity as well as structural strength, and the structural serviceability such as the deflection, cracks, and vibration to give the occupants uncomfortable environment should be checked. Recently, the importance of the vibration has been issued since the Techno Mart accident due to vibration resonance. This study provides a passive vibration control system using the repulsion force of magnets to reduce dynamic vibrations. The systems is devised by importing the constraint condition by a hinge to operate magnets installed at two adjacent locations. The effectiveness of the proposed system is investigated by the vibration control test of a steel beam with and without the control system. It is illustrated in the test that the system is activated by the control forces executed by the magnets and can be utilized in reducing the dynamic responses. The system can be applied to pedestrian bridge and traffic bridge. The applicability is expected in the future by optimizing the factors to affect the dynamic responses like the intensity, mass, locations of magnets.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1410-1418
• /
• 2007

This paper analyzes the throughput of DCF protocol at the MAC layer in the 802.11a wireless LAN. The throughput of DCF protocol is related on probability of backoff, depends on retransmission of each terminal. This paper applied to nonmarcov discrete model for each terminal BER in the base station versus the packet throughput is progressing with the data rate of 6,12,24,54 Mbps, We find the fact that the less the data rate be the higher the throughput. We also find from the throughput calculation by means of traffic intensity in OFDM wireless LAN.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.172-180
• /
• 2006

This study was to analyze the effect of mixed fuel composition and mass fraction on the characteristics of evaporating diesel spray and combustion under the various ambient conditions. The characteristics of vaporization distribution and combustion were visualized by laser induced fluorescent method and direct photography. The experiments were conducted in the constant volume vessel and rapid compression expansion machine with optical access. Multi-component fuels mixed i-octane, n-dodecane and n-hexadecane were injected the vessel and rapid compression expansion machine with electronically controlled common rail injector. Experimental results show that fuel vapor formed stratified distribution. And vaporization and diffusion are become actively increasing in mass fraction of low boiling point component. Consequently multi-component fuels were expected to control the evaporating behavior according to their suitable mass fraction.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.7
• /
• pp.23-30
• /
• 2014

"Cut off line" in automotive passing beam has very important safety function because it serves for headlamp aiming. Headlights that are aimed incorrectly will not only perform poorly but also offend oncoming traffic. In addition, an objective definition of cut off line in low beam is necessary, since a requirement for correct aiming of the beams is specified within all the existing regulations. Accordingly, headlight regulations are requirements that automobiles must satisfy in order to be sold in a particular country. In this study, a more advanced recognition method for the cut off lines of the various headlamps commonly used in Europe, North America, and domestic is suggested and a headlamp testing system is developed to adjust the beam to the country-specific regulation. This system uses image processing technology to detect the cut off lines in the beam patterns of halogen headlamps, high-intensity discharge headlamps, and light-emitting diode headlamps as well.

• The Journal of Korean Physical Therapy
• /
• v.31 no.1
• /
• pp.40-48
• /
• 2019

Purpose: This study assessed the current working conditions and job satisfaction on aquatic therapy performed by physical therapists in South Korea. Methods: A total of 139 (managers: 53, staff: 86) physical therapists participated in this survey (90 questionnaires) and the data were analyzed using the SPSS 21.0 Windows. Results: The retention conditions of aquatic therapy facilitation was high in the rehabilitation centers (or disabled living facilities) and rehabilitation hospitals. On the other hand, there were regional variations. The physical therapists in this field were likely to have limitations or restrictions of professional aquatic therapy education. The subjects showed a tendency for a career interruption during their fifth working year. The overall job satisfaction on aquatic therapy of physical therapists was high (managers: 94.3%, staff: 95.3%, p=0.276), but the work intensity was higher than the other parts of physical therapy and the relative reward was comparatively low (managers: 60.3%, staff: 66.3%, p=0.865). Conclusion: Based on this study, the current working conditions regarding aquatic therapy by physical therapists were assessed. These results will help enhance aquatic therapy and/or in aquatic therapy facilitation.

• Korean Journal of Agricultural Science
• /
• v.50 no.4
• /
• pp.927-940
• /
• 2023

Online shopping has been undergoing significant developments in the South Asian region in the last decade. Using a representative sample of Sri Lankan consumers, this study explored online food purchasing behavior in Sri Lanka, a developing nation and island in South Asia. Data were collected from 562 respondents from all nine provinces in Sri Lanka using an online survey. Consumer attitudes were evaluated using factor analysis, and factor scores were added as explanatory variables to the final model. An ordered logistic regression model was used to examine the impact of consumer demographics, economic variables, and consumer attitudes on online food purchases. Online food purchasing intensity was categorized into four groups that suited ordinal rankings: zero for never, low for rarely, medium for occasionally, and high for regularly. Results indicated that age, income, education, and living in urban areas affect the online food purchasing behavior of Sri Lankan consumers. In addition, trust, convenience, and attitudes toward price were powerful drivers of online food purchasing. The findings have a number of significant managerial ramifications for creating strategies to promote online food purchases in developing South Asian nations like Sri Lanka. Moreover, promoting online shopping could be a potential solution for traffic congestion, ultimately helping to mitigate the negative externalities associated with it, such as carbon emissions and air pollution.