• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권10호
• /
• pp.3858-3874
• /
• 2021

As an essential part of the urban transportation system, precise perception of the traffic flow parameters at the traffic signal intersection ensures traffic safety and fully improves the intersection's capacity. Traditional detection methods of road traffic flow parameter can be divided into the micro and the macro. The microscopic detection methods include geomagnetic induction coil technology, aerial detection technology based on the unmanned aerial vehicles (UAV) and camera video detection technology based on the fixed scene. The macroscopic detection methods include floating car data analysis technology. All the above methods have their advantages and disadvantages. Recently, indoor location methods based on wireless signals have attracted wide attention due to their applicability and low cost. This paper extends the wireless signal indoor location method to the outdoor intersection scene for traffic flow parameter estimation. In this paper, the detection scene is constructed at the intersection based on the received signal strength indication (RSSI) ranging technology extracted from the wireless signal. We extracted the RSSI data from the wireless signals sent to the road side unit (RSU) by the vehicle nodes, calibrated the RSSI ranging model, and finally obtained the traffic flow parameters of the intersection entrance road. We measured the average speed of traffic flow through multiple simulation experiments, the trajectory of traffic flow, and the spatiotemporal map at a single intersection inlet. Finally, we obtained the queue length of the inlet lane at the intersection. The simulation results of the experiment show that the RSSI ranging positioning method based on wireless signals can accurately estimate the traffic flow parameters at the intersection, which also provides a foundation for accurately estimating the traffic flow state in the future era of the Internet of Vehicles.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 추계 종합학술대회 논문집
• /
• pp.42-46
• /
• 2006

Gbps급의 대역폭을 지원하는 차세대 인터넷이 등장함에 따라 다양한 초고속 응용 서비스들이 개발되어 시험 운용되고 있다. 이런 초고속 응용 서비스를 이용하는 도중에 문제가 발생하면 그 원인을 파악하기 어렵다. 하지만 특정 사용자 flow traffic에 대한 정보(종단 간 라우팅 경로, 구간별 패킷과 데이터 전송률과 라우터 상태정보)를 실시간으로 확인 할 수 있다면 문제 원인을 파악, 개선하기가 수월해질 것이다. 현재 한 지점에서 flow traffic을 모니터링 하는 시스템은 개발되어 있으나 사용자 flow traffic의 종단 간 흐름을 모니터링 할 수 있는 시스템은 개발되어 있지 않다. 따라서 본 연구에서는 사용자 flow data의 종단 간 라우팅 경로와 각 구간별 패킷 전송률과 데이터 전송률을 수치로 제공함으로써 데이터 소실 구간을 실시간으로 파악 가능한 종단 간 Flow 모니터링 시스템을 제안하고 구현하였다. 또한 IPv6을 사용하는 사용자 flow traffic에 대해서도 flow traffic 모니터링이 가능 하도록 구현 하였다.

• 대한교통학회지
• /
• 제24권5호
• /
• pp.135-142
• /
• 2006

교통류 이론에서 fundamental diagram이라고 불리는 교통량-밀도 관계는 stationary 상태에서의 교통량과 밀도사이의 평형관계 (equilibrium relation)를 나타낸다 본 연구에서는 개별차량 데이터를 이용하여 교통량-밀도 관계의 전제조건인 stationary 조건을 만족하는 데이터를 추출하는 방법을 제시하였고, stationary 조건을 만족하는 데이터를 교통량-밀도 평면에 도시하였다. 개별차량의 흐름이 자유교통류상태와 혼잡교통류상태에서 상이하며 지점에서 관측된 데이터가 서로 다른 특성의 시계열특성을 보인다는 점에 근거하여 두 가지 상태에 따라 서로 다른 stationary조건을 제시하였다. 본 논문에서 제시된 stationary 조건을 실제로 관측된 데이터에 적용한 결과 자유교통류상태의 stationary조건을 만족하는 데이터는 현재까지 알려진 바와 같이 교통류-밀도 관계의 왼쪽가지에 위치하고. 혼잡교통류상태의 stationary조건을 만족하는 데이터는 교통류-밀도관계의 오른쪽 가지에 위치한다. 또한 본 연구에서 제시된 방법론에 따라 교통류-밀도관계의 전범위에 걸쳐 stationary조건을 만족하는 데이터를 구별하여 교통류-밀도평면에 도시한 결과 교통류의 거의 전영역에 걸쳐 재현 가능한 관계가 나타나는 것을 확인할 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.582-585
• /
• 2018

교통량이 증가하고 도로 네트워크가 복잡해짐에 따라 정확한 교통 흐름 파악을 통해 교통의 원활한 흐름을 유도하는 것은 많은 국가의 관심사항이다. 교통 흐름을 효과적으로 알기 위한 다양한 분석 기술 및 연구들이 있어 왔지만 위치(GPS) 데이터를 포함한 데이터 시각화를 통해 먼저 교통 흐름의 패턴을 찾는 것이 필요하다. 본 논문에서는 실제 도시의 교통 궤적을 시뮬레이션한 내용을 도구로 사용함으로써 교통 흐름의 패턴을 시각화하는 것을 목표로 한다. 이에 24시간운행 되어 지고 정해진 경로가 없는 특징을 가진 실제 택시 40대에 센서 모듈을 설치하여 IoV(Internet of Vehicle)데이터를 수집하고 이 데이터를 이용하여 전처리 과정을 거친 후 오픈소스 기반의 데이터 시각화 도구를 우리의 데이터 특성에 적합하도록 개선하였다. 해당 시각화 모델은 시간 흐름에 따른 차량 트랙킹 Dot을 통해 차량 밀집 지역과 이동 경로 패턴 인식이 가능하므로 도시 내에서 또는 도시와 도시간의 교통 흐름 파악을 통해 도시 환경 문제 개선에 기여할 것으로 기대된다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권10호
• /
• pp.4887-4907
• /
• 2017

Accurate traffic flow forecasting is critical to the development and implementation of city intelligent transportation systems. Therefore, it is one of the most important components in the research of urban traffic scheduling. However, traffic flow forecasting involves a rather complex nonlinear data pattern, particularly during workday peak periods, and a lot of research has shown that traffic flow data reveals a seasonal trend. This paper proposes a new traffic flow forecasting model that combines seasonal relevance vector regression with the hybrid chaotic simulated annealing method (SRVRCSA). Additionally, a numerical example of traffic flow data from The Transportation Data Research Laboratory is used to elucidate the forecasting performance of the proposed SRVRCSA model. The forecasting results indicate that the proposed model yields more accurate forecasting results than the seasonal auto regressive integrated moving average (SARIMA), the double seasonal Holt-Winters exponential smoothing (DSHWES), and the relevance vector regression with hybrid Chaotic Simulated Annealing method (RVRCSA) models. The forecasting performance of RVRCSA with different kernel functions is also studied.

• 대한교통학회지
• /
• 제12권1호
• /
• pp.97-116
• /
• 1994

Today advanced traffic management systems are required because of a high increase in traffic demand. Accordingly, the objective of this study is to take advantage of image processing systems and present image processing methods available for collection of the data on traffic characteristics, and then to investigate the possibility of traffic flow analysis by means of comparison and analysis of measured traffic flow. Data were collected at two places of Daegu city and Kyongbu expressway by using VTR. Rear view (down stream) and frontal view (up stream) methods were employed to compare and analyze traffic characteristics including traffic volume, speed, time-headway, time-occupancy, and vehicle-length, by analysis of measured traffic flow and image processing respectively. Judging from the results obtained by this study, image processing techniques are sufficient for the analysis of traffic volume, but a frame grabber equipped with high speed processor is necessary as well, with low level system judged to be sufficient for traffic volume analysis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권1호
• /
• pp.216-238
• /
• 2023

In intelligent transportation systems, traffic management is an important task. The accurate forecasting of traffic characteristics like flow, congestion, and density is still active research because of the non-linear nature and uncertainty of the spatiotemporal data. Inclement weather, such as rain and snow, and other special events such as holidays, accidents, and road closures have a significant impact on driving and the average speed of vehicles on the road, which lowers traffic capacity and causes congestion in a widespread manner. This work designs a model for multivariate short-term traffic congestion prediction using SLSTM_AE-BiLSTM. The proposed design consists of a Bidirectional Long Short Term Memory(BiLSTM) network to predict traffic flow value and a Convolutional Neural network (CNN) model for detecting the congestion status. This model uses spatial static temporal dynamic data. The stacked Long Short Term Memory Autoencoder (SLSTM AE) is used to encode the weather features into a reduced and more informative feature space. BiLSTM model is used to capture the features from the past and present traffic data simultaneously and also to identify the long-term dependencies. It uses the traffic data and encoded weather data to perform the traffic flow prediction. The CNN model is used to predict the recurring congestion status based on the predicted traffic flow value at a particular urban traffic network. In this work, a publicly available Caltrans PEMS dataset with traffic parameters is used. The proposed model generates the congestion prediction with an accuracy rate of 92.74% which is slightly better when compared with other deep learning models for congestion prediction.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권4호
• /
• pp.1975-1988
• /
• 2019

Short-term traffic flow prediction plays an important role in intelligent transportation systems (ITS) in areas such as transportation management, traffic control and guidance. For short-term traffic flow regression predictions, the main challenge stems from the non-stationary property of traffic flow data. In this paper, we design an ensemble cascading prediction framework based on extremely randomized trees (extra-trees) using a boosting technique called EET to predict the short-term traffic flow under non-stationary environments. Extra-trees is a tree-based ensemble method. It essentially consists of strongly randomizing both the attribute and cut-point choices while splitting a tree node. This mechanism reduces the variance of the model and is, therefore, more suitable for traffic flow regression prediction in non-stationary environments. Moreover, the extra-trees algorithm uses boosting ensemble technique averaging to improve the predictive accuracy and control overfitting. To the best of our knowledge, this is the first time that extra-trees have been used as fundamental building blocks in boosting committee machines. The proposed approach involves predicting 5 min in advance using real-time traffic flow data in the context of inherently considering temporal and spatial correlations. Experiments demonstrate that the proposed method achieves higher accuracy and lower variance and computational complexity when compared to the existing methods.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권8호
• /
• pp.2473-2489
• /
• 2022

Urban development has brought about the increasing saturation of urban traffic demand, and traffic congestion has become the primary problem in transportation. Roads are in a state of waiting in line or even congestion, which seriously affects people's enthusiasm and efficiency of travel. This paper mainly studies the discrete domain path planning method based on the flow data. Taking the traffic flow data based on the highway network structure as the research object, this paper uses the deep learning theory technology to complete the path weight determination process, optimizes the path planning algorithm, realizes the vehicle path planning application for the expressway, and carries on the deployment operation in the highway company. The path topology is constructed to transform the actual road information into abstract space that the machine can understand. An appropriate data structure is used for storage, and a path topology based on the modeling background of expressway is constructed to realize the mutual mapping between the two. Experiments show that the proposed method can further reduce the interpolation error, and the interpolation error in the case of random missing is smaller than that in the other two missing modes. In order to improve the real-time performance of vehicle path planning, the association features are selected, the path weights are calculated comprehensively, and the traditional path planning algorithm structure is optimized. It is of great significance for the sustainable development of cities.

• 한국ITS학회 논문지
• /
• 제17권6호
• /
• pp.144-152
• /
• 2018

본 연구는 기존 교통정보 수집체계의 한계를 보완하기 위한 수단으로써 드론을 사용하였을 경우 교통량, 속도, 밀도 등의 정보를 단시간에 경제적으로 수집 가능하다는 점에 착안하였으며, 이를 위해 드론을 실제 교통현장 촬영영상 분석을 통해 추출된 핵심 교통정보의 타당성 검증과 더불어 다양한 정보수집시나리오 분석을 통해 최적의 교통정보 추출 방법론을 제시하고자 하였다. 본 연구 수행결과, 드론은 단시간에 경제적인 교통정보수집이 가능한 유용한 정보수집 보완수단임은 물론, 매우 간단하고 직관적인 방법으로 연속류 구간의 서비스수준 판정을 가능하게 해 주는 강점이 있는 것으로 확인되었다.