• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1330-1336
• /
• 2014

QoS techniques and transmitted in real-time communication with the advancement of technology a variety of applications and services are available these days, mobile devices bogeuphwa LTE technology to the development of multimedia services with high quality can be realized. In order to satisfy this condition simply with a router with an increased bandwidth expansion by considering the increase in the routing table of the network scalability problems included. Burst traffic data to be distributed according to the environment is to be centered. To do this, the destination -based routing method to transmit the current paper -based (Source routing) routing settings are required. In this paper, published by the IETF, IP switching system based on standardized protocol Label Switching Multi-Protocol Label Switching (MPLS) network by using the existing Best Effect is difficult to guarantee QoS for multimedia transmission in MPLS network environment using optimized QoS guarantees to transmit the multicast.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.12
• /
• pp.1892-1897
• /
• 2012

Modern electronic circuits are of importance for the function of communication, traffic systems and security systems. An intentional threat to these systems could be of big casualties and economic disasters. This study has examined susceptibility of electronic circuits inside the cavity by HPEM(High Power Electromagnetics). The UWB measurements were done at an anechoic chamber using a RADAN voltage source, which can generate a transient impulse of about 200 kV. The HPEM wave penetrated inside the metal case appeared to the long damped ringwave of pulse length compared with the incident wave. In addition, the resonant frequency generated inside the metal case occurred primarily in the range of 1~3 GHz. The frequency band of 1~3 GHz was influenced on the electronic circuit, which was confirmed by an external antenna and an internal absorber. The electronic circuit was influenced by HPEM infiltrated into the cavity at the 86 kV/m out of the metal cases. Also in case of an absorber the susceptibility of an electronic circuit was smallest among other cases(aperture, antenna). It is considered that absorber has a function absorbing electromagnetic wave infiltrated into the cavity and simultaneously limiting resonance by varying a boundary condition inside the cavity. Based on the results, electronic equipment systems could be applied to protection that has suited system requirements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1272-1280
• /
• 2010

WFQ (Weighted Fair Queuing) provides not only fairness among traffic flows in using bandwidth but also guarantees the Quality of Service (QoS) that individual flow requires, which is why it has been applied to the resource reservation protocol (RSVP)-capable router. The RSVP allocates an enough resource to satisfy both the rate and end-to-end delay requirements of the flow in condition of no packet loss, and the WFQ guarantees those QoS requirements with the allocated resource. In a practice, however, most QoS-guaranteed services, specially the Voice of IP, allow a few percent of packet loss, so it is strongly desired that the RSVP and WFQ make the best use of this allowable packet loss. This paper enhances the WFQ to allow packet loss and investigates its performance. The performance evaluation showed that allowing the packet loss of 0.4% can improve the flow admission capability by around 40 percent.

• Journal of Digital Contents Society
• /
• v.14 no.2
• /
• pp.191-197
• /
• 2013

To complete the "anywhere" mobile service there should not be shaded areas. However, it is never economical to deploy BS's (Base Stations) in a low population density area due to the low resource utilization. We propose a design technique to install RS's(Relay Stations) which are cheaper than BS's and find the condition in which the proposed technique is acceptible. The proposed design technique aims to allocate the frequency and time resources to RS's to minimize the transmission rate degradation due to interferences between RS's as well as to maximize the parallelism in transmission. We showed by simulation that the proposed technique achieves cost benefits when the expected traffic is less than 20.32 percent of the total BS capacity. The proposed technique is compatible with the IEEE 802.16j, thus can be extended to multi-hop configuration.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.2
• /
• pp.131-139
• /
• 1987

The purpose of this study is to define the primary factors obstructing the bus services that play an important part in mass transportation in almost the cities, and then to develop the models for travelling speed. To define the primary factors, two video cameras were used in this study, one for speed meter, the other for traffic condition, from which time-speed graphs were made. In the graphs, the gaps between road regulation speed and travelling speed were analyzed by monitor analysis. After this, primary delay factors were classified by quantification theory type I. and then to develop the models for travelling speed, stepwise analysis was used.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.5
• /
• pp.717-732
• /
• 2017

Recently, the construction of underground structure such as a double-deck tunnel is increasing to manage rapid growth of roadway traffic volume. Double-deck tunnel includes middle slab to separate upper and lower road inside, and various sources affect the dynamic behaviour of middle slab due to dynamic loading of vehicle. Therefore, it is important to investigate the dynamic response of middle slab precisely to apply it to design and analysis of double-deck tunnel. In this study, dynamic analysis model of middle slab considering structural type, design velocity, vehicle load, and surface roughness, etc. is built. 3-dimensional dynamic analysis is performed to assess dynamic response of middle slab. Consequently, Dynamic Magnification Factor which represents dynamic response of middle slab shows maximum in case of elastomeric bearings (EB) and average roughness (Grade C). It is also expected that dynamic response can be reduced under the condition of good roughness (Grade B) and fixed bearings (FB).

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.10 no.2
• /
• pp.57-72
• /
• 2004

Background : The part to be very important that we make the physical development rightly at elementary school student days. Objective : This study investigated the relation of a physical health status which itself recognizes and an exercise performance situation out for an elementary school students. Methods : This cross-sectional study examined health and exercise performance status of 1,032 elementary school children. To examine children's a physical injury experience and injury occurrence characteristic and a personal computer utility condition, a body alignment status of the student which parents recognize and the relation of a fatigue and concentration level was an investigation with other factors. Results: An average age of the children was the 10.95 yr and an average weight was the 39.02 kg and an average height was the 145.17cm. The student to be experiencing currently an pain occurrence was 192(19.07%). It was most high to the grade 6(23.33%) compared with different grade(p<.01). Physical pain occurrence rate did not exist by gender(p>.05). There is most an pain occurrence region the ankle(38.0%). They had a 27.19% an physical injury experience of the students. A injury rate was revealed that were high as were the high grade(grade 6, 36.72%)(p<.01). A reason of the injury rate was high in a collision at the body(19.84%), falling down(18.68%) sequence at a traffic accident(22.96%)(p<.05). There were the significant relation to the school year the reason of the injury (p<.05). Currently there was the student to be taking special exercises a 57.97%. This that they have the relation with exercise with physical pain students to recognize 23.8%. The significant relation did not exist in the physical exercise execution and pain occurrence on the body(p>.05).

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.2
• /
• pp.1-11
• /
• 2014

In this paper, travel speed patterns were deducted based on historical DSRC travel speed data using Decision Tree technique to improve availability of the massive amount of historical data. These patterns were designed to reflect spatio-temporal vicissitudes in reality by generating pattern units classified by months, time of day, and highway sections. The study area was from Seoul TG to Ansung IC sections on Gyung-bu highway where high peak time of day frequently occurs in South Korea. Decision Tree technique was applied to categorize travel speed according to day of week. As a result, five different pattern groups were generated: (Mon)(Tue Wed Thu)(Fri)(Sat)(Sun). Statistical verification was conducted to prove the validity of patterns on nine different highway sections, and the accuracy of fitting was found to be 93%. To reduce travel pattern errors against individual travel speed data, inclusion of four additional variables were also tested. Among those variables, 'traffic condition on previous month' variable improved the pattern grouping accuracy by reducing 50% of speed variance in the decision tree model developed.

• 한국HCI학회:학술대회논문집
• /
• 2008.02c
• /
• pp.150-151
• /
• 2008

With the proliferation of vehicles and advancement of Information Technology, the technology of Telematics, which provides valuable services to people by collecting and analyzing the information from drivers, vehicles and Telematics environments (e.g. traffic information, road condition, weather information, etc.), has been a hot research area in IT and automotive recently. As the information technology revolution brings more and more assistance for driver information processing becomes increasing important. Therefore, drivers' workload is very essential factor for safety driving in Telematics environment. For managing drivers' workload effectively, ETRI haven been developing vehicle and driver management system which can collect data from drivers and vehicle in realtime and analyze the data to manage drivers' and vehcles' status since 2007. This technology will apply to commercial vehicle telematics such as texi or truck management system in the future for increasing driving safety. In this presentation, I would like to explain what we had developed so far and discuss future direction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6B
• /
• pp.331-337
• /
• 2005

The optical Internet is considered as a feasible solution for transporting huge amount of traffic volume in the future Internet. Among optical switching technology for the optical Internet, OBS becomes one of the most promoting solution. Recently, a lebeled OBS(LOBS) architecture is considered for an efficient control on OBS network. Given that a data burst may contain few thousands of IP packets, a single loss of data burst results in a serious throughput degradation in LOBS network. In this paper, we improve the performance of LOBS network by introducing the burst congestion control mechanism. More specifically, the OBS router at the network core detects the network congestion by measuring the loss probability of burst control packet. The OBS router at the network edge reduces the burst generation according to the network condition repored by the OBS router at the network core. Through the simulations, it is shown that the proposed congestion control mechanism can reduce the burst loss probability and improve the LOBS network throughput.