• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.484-510
• /
• 2017

Network security is rapidly developing, but so are attack methods. Network worms are one of the most widely used attack methods and have are able to propagate quickly. As an active defense approach to network worms, the honeynet technique has long been limited by the closed architecture of traditional network devices. In this paper, we propose a closed loop defense system of worms based on a Software-Defined Networking (SDN) technology, called Worm-Hunter. The flexibility of SDN in network building is introduced to structure the network infrastructures of Worm-Hunter. By using well-designed flow tables, Worm-Hunter is able to easily deploy different honeynet systems with different network structures and dynamically. When anomalous traffic is detected by the analyzer in Worm-Hunter, it can be redirected into the honeynet and then safely analyzed. Throughout the process, attackers will not be aware that they are caught, and all of the attack behavior is recorded in the system for further analysis. Finally, we verify the system via experiments. The experiments show that Worm-Hunter is able to build multiple honeynet systems on one physical platform. Meanwhile, all of the honeynet systems with the same topology operate without interference.

• Korean Journal of Pharmacognosy
• /
• v.49 no.2
• /
• pp.165-171
• /
• 2018

Artemisiae Capillaris Herba is a dried aerial part of Asteraceae capillaris Thunb.(Compositae), which has been used in Korean traditional medicine for the treatment of various diseases. It has a variety of pharmacological activities and has been evaluated for potential as an active ingredient in cosmeceutical products. In the cosmetics industry, animal experiments is besides the major concern of ethics, there are few more disadvantages of animal experimentation like demand of skilled manpower, time consuming protocols and high cost. Therefore, various alternatives to animal experiments have been proposed. The purpose of this study was to investigate the skin permeation characteristics of chlorogenic acid and dimethyleculetin, which are constituent of Artemisiae Capillaris Herba by using Franz diffusion cell. As a result, skin permeability was characterized by flux(penetration rates) and $K_p$(permeability coefficient) value, chlorogenic acid had lower flux and $K_p$ than dimethylesculetin. According to the definitions of Marzulli, chlorogenic acid and dimethylesculetin would be classified as 'Moderate' and 'Very fast' respectively. In conclusion, skin permeation characteristics of chlorogenic acid and dimethylesculetin were confirmed through Franz diffusion cell, and suggests the direction of alternative method for skin permeation of natural compounds.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.421-426
• /
• 2004

Analyzing adaptive possibilities of agents in multi-agents system, we have discovered new aspects of ambient intelligence in distributed modular systems using intelligent building blocks (I-BLOCKS) [1]. This paper describes early scientific researches related to technical design, applicable experiments and evaluation of adaptive processing and information interaction among I-BLOCKS allowing users to easily develop ambient intelligence applications. The processing technology presented in this paper is embedded inside each DUPLO1 brick by microprocessor as well as selected sensors and actuators in addition. Behaviors of an I-BLOCKS modular structure are defined by the internal processing functionality of each I-Blocks in such structure and communication capacities between I-BLOCKS. Users of the I-BLOCKS system can do 'programming by building' and thereby create specific functionalities of a modular structure of intelligent artefacts without the need to learn and use traditional programming language. From investigating different effects of modem artificial intelligence, I-BLOCKS we have developed might possibly contain potential possibilities for developing applications in ambient intelligence (AmI) environments. To illustrate these possibilities, the paper presents a range of different experimental scenarios in which I-BLOCKS have been used to set-up reconfigurable modular systems. The paper also reports briefly about earlier experiments of I-BLOCKS in different research fields, allowing users to construct AmI applications by a just defined concept of modular artefacts [3].

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.551-557
• /
• 2009

A development of smart materials is becoming a prominent issue on present industries. A smart material, included in functions, is needed for micro fabrication. A shape memory alloy(SMA) in a smart material is best known material. Ni-Ti alloy, composed of nikel and titanium is one of the best shape memory alloy(SMA). Nitinol SMA is used for a lot of high tech industry such as aero space, medical device, micro actuator, sensor system. However, Ni-Ti SMA is difficult to process to make a shape and fabrications as traditional machining process. Because nitinol SMA, that is contained nikel content more than titanium content, has similar physical characteristics of titanium. In this paper, the characteristics of ECM grooving process for nitinol SMA are investigated by experiments. The experiments in this study are progressed for power, gap distance and machining time. The characteristics are found each part. Fine shape in work piece can be found on conditions; current 6A, duty factor 50%, gap distance 15%, gap distance $15{\mu}m$, machining time 10min.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.2
• /
• pp.183-189
• /
• 2012

Most of the domestic residential buildings have used the traditional radiant heating system, circulating hot water through the cross-linked polyethylene(PE-X) pipe buried in the floor panel of the heating space. New type of the heating panel was recently developed using heat pipes with double wicks. Some experiments were carried out in this study to verify the thermal characteristics of this heating system at the unit heating space which surrounded by outer space whose temperature of air be maintained scheduled value with time. Through the various experiments with several parameters, such as flow rate, inlet and outlet temperatures of hot water and the heating duration and so on, we found that the floor heating system with heat pipes was able to reduce the pumping power for hot water circulation by 4~31% compared with the conventional panel heating system using PE-X pipe. These results could be used for optimal design and efficient operation of the heating system as well as improvement of thermal comfort.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.5
• /
• pp.76-81
• /
• 2014

The ozone generation is commonly made with silent discharge method using quartz glass dielectric. In this paper, using $Al_2O_3$ dielectric to instead of the traditional quartz glass dielectric to improve the system efficiency is presented. The dielectric was manufactured as tube shape (Internal diameter${\times}$ Outside diameter: $11{\times}15mm$) using 99% $Al_2O_3$ ceramic. The characteristics of dielectric discharge and ozone generation were studied of experiments with variation of discharge power, discharge electrode space and rate of flow for supplied gas ($O_2$/Air). As the experimental results, in the same discharge space, the ozone concentration continuously increased with input power increasing, and ozone yield increased until saturation happened. Also, the expended power increased with discharge space extended due to discharge power increased. In additional, the ozone concentration of oxygen ozone was higher than air that was observed when using oxygen ozone in proposed experiments.

• Advances in aircraft and spacecraft science
• /
• v.3 no.1
• /
• pp.29-43
• /
• 2016

Composite materials are rapidly gaining popularity as an alternative to metals for structural and load bearing applications in the aerospace, automotive, alternate energy and consumer industries. With the advent of thermoplastic composites and advances in recycling technologies, fully recyclable composites are gaining ground over traditional thermoset composites. Stamp forming as an alternative processing technique for sheet products has proven to be effective in allowing the fast manufacturing rates required for mass production of components. This study investigates the feasibility of using the stamp forming technique for the processing of thermoplastic, recyclable composite materials. The material system used in this study is a self-reinforced polypropylene composite material (Curv$^{(R)}$). The investigation includes a detailed experimental study based on strain measurements using a non-contact optical measurement system in conjunction with stamping equipment to record and measure the formability of the thermoplastic composites in real time. A Design of Experiments (DOE) methodology was adopted to elucidate the effect of process parameters that included blank holder force, pre heat temperature and feed rate on stamp forming. DOE analyses indicate that feed rate had negligible influence on the strain evolution during stamp forming and blank holder force and preheat temperature had significant effect on strain evolution during forming.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.6
• /
• pp.784-789
• /
• 2018

Accurate aerodynamic characterization of projectile is crucial for successful development of munition. The aerodynamic characterization of fin stabilized projectile is more difficult than characterization of traditional symmetric ballistic projectile. Instrumented free flight experiments were conducted to quantify rolling behavior of fin stabilized projectile. The instrumented projectiles were launched from a rifled tube and the onboard sensor data were acquired through a telemetry transmitter. Roll rate was measured for fin stabilized projectile by means of an angular rate sensor. And, roll damping coefficients were estimated from onboard sensor data acquired during gun firing and trajectory analysis of mathematical model.

• Journal of Korean Medicine Rehabilitation
• /
• v.31 no.4
• /
• pp.13-23
• /
• 2021

Objectives The purpose of this research is to comprehensively analyze about Jowiseungcheong-tang (Diàowèishēngqīng-tāng). This herbal medicine is widely used to treat obesity and metabolic disease. Methods We used 3 search terms, 'Jowiseungcheong-tang', 'Jowiseungcheong-tang plus obesity' and 'Jowiseungcheong-tang plus metabolic disease' in Korean word via 5 domestic databases. Therefore, 8 laboratory experiments and 4 clinical researches were chosen. Results Jowiseungcheong-tang (Diàowèishēngqīng-tāng) was identified as a herbal medicine for obesity and related metabolic disease. In plasma level of lipid, leptin, inflammatory material were decreased in laboratory experiments. Weight loss and symptom relief were reported in clinical research. Conclusions Definite information about laboratory experiment was showed, specifically suitable index and numerical value. In clinical research, although Jowiseungcheong-tang (Diàowèishēngqīng-tāng) is widely used for obesity and metabolic disease, the number of reported thesis and patient were pretty a few. Also, diagnosis methods were also scanty. Multi-institutional clinical trial should be progressed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.5
• /
• pp.133-138
• /
• 2010

We present a new multimodal biometric authentication method, which performs both feature-level fusion and decision-level fusion. After generating support vector machines for new features made by integrating face and voice features, the final decision for authentication is made by integrating decisions of face SVM classifier, voice SVM classifier and integrated features SVM clssifier. We justify our proposal by comparing our method with traditional one by experiments with XM2VTS multimodal database. The experiments show that our multilevel fusion algorithm gives higher recognition rate than the existing schemes.