• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.98-107
• /
• 1993

Domestic production of agricultural machinery has come to be seen as appropriate entry route in the capital goods industry for most African countries, including Ghana, which has purely and strongly agricultural -based economics with a weak industrial infrastructure. Recent studies in Ghana do indicate that in addition to possessing technological capability in the manufacture of handtools, there is evidence of increased production of machinery for the primary food processing sector. Local manufacture of tractors and associated implements is embryonic, with an average domestic production of agricultural machinery in Ghana and analyses the available technologies and economic indicators in the local agricultural machinery industry. Areas for indicators in the local agricultural machinery industry. Areas for future development are identified.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1196-1201
• /
• 1993

Test of Caterpillar Challenger 65 tractor which has rubber tracks, and articulated four wheel drive tractor with dual wheels and a mechanical front wheel drive tractor were conducted on an unplowed and plouwed wheat stubble field. The following parameters were analyzed : tractive efficiency (ηv), net tractive coefficient ($\phi$n), slip ($\sigma$) , drawbar pull(Fv), drawbar power (Pv) and forward velocity(v). The maximum net tractive coefficient was established at the tractive efficiency of 0.60 on the unplowed wheat stubble field : for the Challenger 65 tractor 0.855 ; 4WD 0.624 and MFWD 0.534 and on the plowed wheat stubble field with the tractive efficiency of 0.40 for the Challenger 65 tractor 0.82 : 4WD 0.57 and for tractor MFWD 0.48.

• Journal of Biosystems Engineering
• /
• v.15 no.4
• /
• pp.290-297
• /
• 1990

The purposes of this study were to perform theoretical analysis of an electronic-hydraulic hitch control system for position and draft control of tractor implements and to investigate the performance of the control system through computer simulation. Computer simulation models which could predict the responses of the system to the step and sinusoidal inputs in position and draft controls were developed using the simulation package "TUTSIM". The effects of control mode, hydraulic flow rate, deadband, and proportional constant on control performance of the system were investigated. The simulated results were compard with the experimental ones to verify the simulation models. The simulation models appeared to be a useful means for the analysis and the design of the electronic-hydraulic hitch control system.

• Journal of Biosystems Engineering
• /
• v.32 no.5
• /
• pp.284-291
• /
• 2007

This study was to investigate performance of position, basic controls and additional control for man-machine interface on a 3-point hitch of a tractor. The developed additional control was one-touchup, backup, turnup, liftarm limited, PTO on/off and an external control. As a result of experiment, maximum steady state error of response system was lower than $0.8^{\circ}$ and this result showed the function operated normally because the dead band of system set was ${\pm}1^{\circ}$. There was no abnormal situation by switch operation and sensor signal during the performance test. The results of experiment showed the characteristics of the response was sufficient to be used as the position and additional control system for tractors.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10a
• /
• pp.117-124
• /
• 1998

This paper proposes a simulation model which evaluates operation plans of container terminal. The operation plans of container terminal consist of berth plan, load plan, unload plan, yard plan, and equipment plan. It is discussed how to apply the simulation method to evaluate those plans. Simulation analysis is based on data about plans from the operation planning system through an interface program. It is discussed what we should got in the simulation, for example, the statistics about container-handling equipment such as container cranes, transfer cranes, yard tractors, and trailers used in the transportation of containers.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.45-53
• /
• 2017

Disc harrow-type composite working implements of tractors are able to work almost 15km/hr. Soil reversing and plowing of agricultural fields are thereby faster than the existing rotavator speed of 2.5 km/h. In Korea, its supply process is being delayed because of the traditional tillage method of rotavator plowing operations. To develop products suitable for the domestic environment, an analysis and inspection was performed on the products of advanced specifications. 3D modeling was performed on main parts and frames using 3D scanner.

• Journal of Biosystems Engineering
• /
• v.23 no.6
• /
• pp.549-560
• /
• 1998

The dynamic model of a tractor-trailer system developed in the first part of this paper was verified in this article by comparing the simulated acceleration responses of the system with actually measured ones. A commercially available tractor and a trailer were used for the verification test. Values of the model parameters were measured or theoretically derived if the measurement was practically impossible. The tractor-trailer system was operated with different forward speeds over three equally spaced half-sine bumps on the flat concrete surface. Results of the verification tests showed that autospectra of the measured and simulated accelerations of the tractor-trailer system agreed well up to the frequencies slightly feater than the fundamental frequencies of the ground excitations and at the frequencies of engine excitations. The mean of normalized errors of the simulated responses to the measured ones was estimated to be less than 10% for all the test runs. The peak responses in the autospectra also coincided well both in the frequency and magnitude.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.72-77
• /
• 2002

부하변동이 크고 전ㆍ후진 작업이 많아 잦은 변속이 요구되는 트랙터 작업의 특성에 의해 작업성과 효율, 양 측면에서 다루어진 변속 방식이 파워시프트를 이용한 변속방식이다. 세계적으로 60년대 이후부터 보급되기 시작하여 수동 변속기 다음으로 보편화되어있는 이 변속 방식은 특히 대형 트랙터에 기본으로 장착되어야 하는 것으로 여겨지고 있기 때문에, 해외수출을 위해서는 반드시 장착되어야 하는 것으로 받아들여지고 있다. 그러나 우리나라에서는 최근에야 트랙터용 파워시프트의 국산화를 위한 개발과정에서 연구가 이루어지고 있는 실정이고, 개발 중에 직면하는 다양한 문제는, 파워시프트 변속기에 대한 이해와 해석 기술의 부족에 기인한 것으로 생각된다. 그러므로, 파워시프트 변속기에 대한 시스템 해석 기술을 개발, 제공하는 것이 필요할 것으로 판단된다. (중략)

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.1041-1044
• /
• 1996

The plastic-film-covered hill planter is a new-type seeding machine, including tow types which are mounted by 11kw and 40 kw tractors. It is made up of fertilizing , plastic-film covering perforating film and hole seeding, soil sealing apparatus, and can work at 5-7kw/h. The plastic-film covering and seeding of cotton, corn and soybean can all use this machine. The plastic-film-covered hill planter is mainly composed of plastic film covering unit, drum-type hill-drop unit and furrow coverer, some other types are also equipped with fertilizer drill unit. It can do combined work of covering plastic film , sowing , plastic film perforating , soil covering at one time, and it is suitable to the covering plastic film as well as planting of the grandulated crops, such as cotton , corn, soybean and so on.

• Journal of Biosystems Engineering
• /
• v.22 no.4
• /
• pp.421-432
• /
• 1997

This study was conducted to investigate dynamic characteristics of agricultural tractor with a particular interest in ride vibrations when it is subjected to various excitation forces. As the first part of it this paper describes development of dynamic model of a tractor-trailer system and its equations of motions. An 3 dimensional 16-degree-of-freedom dynamic model for a tractor-trailer system was developed and its equations of motions were derived, which will be used to investigate the effects of irregular ground surface and excitation forces due to the engine mounted on the tractor. And the excitation forces were also formulated analytically. The transition matrix method and QR algorithm were proposed for numerical solution of the equation of motions fur the developed model. The later parts of the study will include a proof of the model and optimization from which tractors can be designed to minimize the ride vibrations. This will be presented in the second and third papers to be followed shortly.