• 로봇학회논문지
• /
• 제6권1호
• /
• pp.34-41
• /
• 2011

This paper presents a frequency-response test performed on an antagonistic actuation system consisting of two Mckibben pneumatic artificial muscles and a pneumatic circuit. A linear model, capable of estimating the dynamic characteristics of the antagonistic system in the operating range of pneumatic artificial muscles, was optimally calculated based on frequency-response results and applied to a multiple simultaneous specification control scheme. Trajectory tracking results showed that the presented multiple simultaneous specification controller, built experimentally by three PD typed sample controllers, satisfied successfully all required control specifications; rising time, maximum overshoot, steady-state error.

• International Journal of Ocean System Engineering
• /
• 제3권4호
• /
• pp.218-224
• /
• 2013

This paper describes the design and control of a hovering AUV test-bed and analyzes the dynamic performance of the vehicle using simulation programs. The main purpose of this vehicle is to carry out fundamental tests of its station keeping, attitude control, and desired position tracking. Its configuration is similar to the general appearance of an ROV for underwater operations, and its dimensions are $0.75m{\times}0.5m{\times}0.5m$. It has four 450-W thrusters for longitudinal/lateral/vertical propulsion and is equipped with a pressure sensor for measuring the water depth and a magnetic compass for measuring its heading angle. The navigation of the vehicle is controlled by an onboard Pentium III-class computer, which runs with the help of the Windows XP operating system. This provides an appropriate environment for developing the various algorithms needed for developing and advancing a hovering AUV.

• 한국건축시공학회지
• /
• 제6권1호
• /
• pp.67-72
• /
• 2006

There are a lot of problem about waterproofing membrane coating for concrete deck of bridge and waterproofing sheets for concrete of deck of bridge because it couldn't confirm waterproofing's defeat after construction. These problems make a waterproofing material damage and condrete deck of bridge damage. So It needs a lot of money for repair work and reinforcement work. Therefor the structure slab of using waterproofing material protect invasion of water. Also, Concrete deck of bridge need a endurance permeability for the reduction repair payment. In this study, An experimental study on the quality standardization test method waterproofing layer on working of live load.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.1-5
• /
• 2005

There are a lot of problem about waterproofing membrane coating for concrete deck of bridge and waterproofing sheets for concrete of deck of bridge because it couldn't confirm waterproofing's defeat after construction. These problems make a waterproofing material damage and concrete deck of bridge damage. So It needs a lot of money for repair work and reinforcement work. Therefor the structure slab of using waterproofing material protect invasion of water. Also, Concrete deck of bridge need a endurance permeability for the reduction repair payment. In this study, An experimental study on the quality standardization test method waterproofing layer on working of live load

• 전기학회논문지
• /
• 제62권6호
• /
• pp.756-761
• /
• 2013

This paper propose the new demodulation method that can detect resolver signal's peak at the time of position estimation when the position information is required during current controller period. The proposed method is performed in a synchronous demodulation way with exciting signal and also cover a capability which can compensate the lag element of exciting signal caused by the resolver's inductive component and filter circuit. This paper carried out the experiment to investigate the validity and performance of the suggested method by using the test board made up of DSP and demodulation circuit. The test results show that the proposed method is theoretically clear and work completely as expected from making sure of sampling resolver signal's peak at the time of position estimation. In addition, Software position tracking algorithm is executed with the demodulated signals generated by the suggested method and an exact position can be estimated.

• 한국군사과학기술학회지
• /
• 제6권1호
• /
• pp.49-58
• /
• 2003

Compared with generic GPS receiver, post-processing software GPS receiver has many advantages for high dynamic vehicle tracking. It has the advantage of the application of various tracking algorithms and aiding schemes. The post-processing system observes the carrier phase measurement data from the recorded GPS signals, detects and isolates the cycle slip. The observed carrier phase data and the raw data of the reference station are processed by carrier phase DGPS scheme. And the integer ambiguity resolution algorithm is used for resolving single frequency carrier phase ambiguity. The results of static and real flight test are presented and show that the proposed GPS translator processing system satisfies submeter accuracy.

• 한국소음진동공학회논문집
• /
• 제26권6_spc호
• /
• pp.736-743
• /
• 2016

This study describes optimization methods for adjustment of helicopter main rotor tracking and balancing (RTB). RTB is a essential process for helicopter operation and maintenance. Linear and non-linear models were developed with past RTB test results for estimation of RTB adjustment. Then global and sequential optimization methods were applied to the each of models. Utilization of the individual optimization method with each model is hard to fulfill the RTB requirements because of different characteristics of each blade. Therefore an ensemble model was used to integrate every estimated adjustment result, and an adaptive method was also applied to adjustment values of the linear model to update for next estimations. The goal of this developed RTB adjustment optimization program is to achieve the requirements within 2 run. Additional tests for comparison of weight factor of the ensemble model are however necessary.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.1017-1021
• /
• 2005

There is a need for effective tracking and control of material loading and delivery time especially during the finishing-work phases to eliminate the need for lay-down space on the site. Hence, it is essential to monitor the relevant information regarding material procurement in construction sites, and it is also the key factor for successful site control and the adoption of the Just-in-Time concept for high-rise building construction. The purpose of this study is to test RFID's readability in order to develop a finishing material monitoring system through the application of RFID technology.

• 한국항공우주학회지
• /
• 제39권12호
• /
• pp.1115-1123
• /
• 2011

본 논문에서는 무인항공기의 근거리 비행체 탐지 및 추적을 위한 영상처리 알고리듬을 제안한다. 제안된 알고리듬은 연속되는 영상에서 계산되는 호모그래피를 사용하여 움직이는 객체를 검출하고 확률적 다수-가설 추적기법으로 검출된 객체가 접근하는 비행체인지의 여부를 판단한다. 이는 항공기의 저고도 비행 시 영상에 보여지는 지표면과 같이 복잡한 배경 위에서 이동하는 비행체를 검출할 수 있고, 비행체의 동역학적 특성을 고려할 수 있기 때문에 색상기반의 비행체 탐지기법보다 향상된 성능을 보여준다. 또한 외부영향에 대한 임계치의 민감도를 현저히 감소시키므로 소형 무인항공기의 저고도 비행실험수행 시 효과적이다. 제안된 영상처리 알고리듬을 실제 비행실험 영상에 적용하여 성능을 검증하였다.

• 한국인터넷방송통신학회논문지
• /
• 제18권5호
• /
• pp.187-195
• /
• 2018

본 연구는 실시간 시선 및 머리 추적 방식을 사용하여 기존의 지필검사의 실행증으로 인한 검사 오류를 최소화하고, 환자의 머리와 시선 방향의 틀어짐을 정량적으로 평가를 하고자 하였다. 이에 대한 결과로 시선 및 머리 움직임 정보를 정량적으로 측정할 수 있는 소프트웨어를 개발하고, 기존 지필검사로 많이 사용되고 있는 선 나누기 검사와 별 지우기 검사를 전산화하였다. 또한, 재활 훈련을 위해 Warren의 시지각 계층 모델 하위 수준의 시각적 기술에 해당하는 콘텐츠를 구현하여 반복적이고 독립적이게 수행될 수 있도록 하였다. 이를 통해 환자가 능동적으로 재활에 참여하도록 하고 개선된 정도를 정량적으로 비교할 수 있다.