• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.800-805
• /
• 2007

The critical speed of railway bogie is very important in terms of the verification of the vehicle design procedure and safety. The dynamic performance of bogie is tested on the railway roller rig in a laboratory in place of field testing on track. But, the testing on the full scale roller rig caused many problems relating to test costs, test time and has the difficulty in test condition setup. To overcome these problems, scaled models were used in the filed of railway vehicle design and test. In this paper, we have studied the critical speed of scaled bogie model. We have made the 1/5 scaled bogie, the scaled roller rig and analyzed the critical speed of the scaled bogie through the numerical simulation and running test of the scaled bogie. We have confirmed that the analysis results of the critical speed correspond with the test results.

• Smart Structures and Systems
• /
• v.13 no.6
• /
• pp.993-1014
• /
• 2014

In civil engineering, revolving structures (RS) are a unique structural form applied in innovative architecture design. Such structures are able to revolve around themselves or along a certain track. However, few studies are dedicated to safety design or health monitoring of RS. In this paper, a wireless dynamic sensing system is developed for RS, and field tests toward a large revolving auditorium are conducted accordingly. At first, a wheel-rail problem is proposed: The internal force redistributes in RS, which is due to wheel-rail irregularity. Then the development of the sensing system for RS is presented. It includes system architecture, network organization, vibrating wire sensor (VWS) nodes and online remote control. To keep the sensor network identifiable during revolving, the addresses of sensor nodes are reassigned dynamically when RS position changes. At last, the system is mounted on a huge outdoor revolving auditorium. Considering the influence of the proposed problem, the RS of the auditorium has been designed conservatively. Two field tests are conducted via the sensing system. In the first test, 2000 people are invited to act as the live load. During the revolving process, data is collected from RS in three different load cases. The other test is the online monitoring for the auditorium during the official performances. In the end, the field-testing result verifies the existence of the wheel-rail problem. The result also indicates the dynamic sensing system is applicable and durable even while RS is rotating.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.23-29
• /
• 2014

The advanced traffic management system of intelligent transport systems automates the related traffic tasks such as vehicle speed, traffic volume and traffic incidents through the improved infrastructures like high definition cameras, high-performance radar sensors. For the safety of road users, especially, the automated incident detection and secondary accident prevention system is required. Normally, CCTV based image object detection and radar based object detection is used in this system. In this paper, we proposed the algorithm for real time highway incident detection system using multi surveillance cameras to mosaic video and track accurately the moving object that taken from different angles by background modeling. We confirmed through experiments that the video detection can supplement the short-range shaded area and the long-range detection limit of radar. In addition, the video detection has better classification features in daytime detection excluding the bad weather condition.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.12
• /
• pp.13-23
• /
• 2017

This paper discusses about the reinforcement materials and construction method in order to cope with roadbed settlement in operating railway. In Korea, concrete tracks have been introduced to urban railways, high-speed railways, and general railways, but some recently constructed concrete tracks have experienced roadbed settlements. Reinforcement of the railway roadbed is urgent task for safe operation of railway, but it is difficult to reinforce the roadbed and there are no case history of reinforcing railway roadbed under an operating railroad track. Therefore, in this study, the target performance level for roadbed reinforcement was determined, and infiltration and solidity injection efficiency were investigated for selected reinforcement materials. As a result of the study, it was found that the generally used reinforcement materials and methods for geotechnical works need to be improved for applying in railway roadbed reinforcement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.167-172
• /
• 2000

This paper is aimed at developing an location tracking for mobile station employing currently available mobile communication network of cellular phone and PCS(Personal Communication System). When the location tracking of mobile stations is in services, the services such as Emergency-119, crime investigation, effective urban traffic management or the safety protection of Alzheimer's patients, ran be available. This paper is to track the mobile station in communication network in NLOS environment. To achieve reduction of the standard noise, Kalman filter is used. In terms of the distance, positions are located by using TOA and TDOA methods in the environment that removes NLOS bias in the measured data. And then smoothing method is used. to achieve reduction of the position error values

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.5
• /
• pp.74-80
• /
• 2011

Medical implant devices are one of the targets of the US's Food & Drug Administration (FDA) for tracking in case of a serious adverse event since they are directly connected to the lives of patients. The US law stipulates that the public health agency shall order implantable device makers to track their product down to the patient level if a serious adverse event has occurred or defects have been discovered; in reality, however, the agency can pass on the responsibility for tracking or recalling faulty devices to the manufacturers or use mass media. This article proposes an efficient tracking and recall management system and examines four main virtual scenarios based on such. This research seeks to suggest a system that enables FDA to perform accurate and prompt tracking and recall management for patients' enhanced safety.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.837-848
• /
• 2014

This paper describes the development of a walking assistive robot for effective self-rehabilitation for elderly people facing an inconvenience in walking. The main features of the developed robot are enhanced safety and mobility using the baby walker and electric wheelchair mechanisms and an accurate walking tracking control algorithm using potentiometers and stereo cameras. Specifically, a pelvis supporter is designed to prevent the user from falling down and reduce the burden on their legs, and electric motors are used for easy locomotion with low effort. Next, the walking intention and direction of the user are automatically recognized by using potentiometers attached at the pelvis supporter so that the robot can track the user, and the rapidity and accuracy of the tracking were increased by applying a lower-body motion analysis algorithm with stereo cameras. Finally, the user-tracking performance of the developed robot was experimentally verified through stepwise walking assistance experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.801-804
• /
• 2003

The autopilot system of vessel is proposed to take service safety sorority, to elevate service efficiency, to decrease labor and to improve working environment. Ultimate purpose of it is to minimize the number of crew by guaranteeing economical efficiency of shipping service. Recently, the research is being achieving to compensate various nonlinear parameters of vessel and apply it is course keeping control, track keeping control, roll-rudder stabilization, dynamic ship positioning and automatic mooring control etc. using optimizing control technique. Relation between rudder angle controlled by steering machine of vessel and ship-heading angle, and load condition of ship are nonlinear, which affect various parameters of shipping service. The speed and direction of waves, velocity and quantity of wind, which also cause the non-linearity of it. Therefore the autopilot system of ship requires the robust control algorithm can overcome various non-linearity. On this paper, we design the autopilot system of ship, which overcome nonlinear parameters and disturbance of it using Fuzzy Algorithm, evaluate the proposed algorithm and its excellence through simulation

• KIISE Transactions on Computing Practices
• /
• v.22 no.2
• /
• pp.61-68
• /
• 2016

Surveillance cameras have been installed in many places because security and safety has become an important issue in modern society. However, watching surveillance videos and judging accidental situations is very labor-intensive and time-consuming. So now, requests for research to automatically analyze the surveillance videos is growing. In this paper, we propose a surveillance system to track multiple persons in videos and to summarize the videos based on tracking information. The proposed surveillance summarization system applies an adaptive illumination correction, subtracts the background, detects multiple persons, tracks the persons, and saves their tracking information in a database. The tracking information includes tracking one's path, their movement status, length of staying time at the location, enterance/exit times, and so on. The movement status is classified into six statuses(Enter, Stay, Slow, Normal, Fast, and Exit). This proposed summarization system provides a person's status as a graph in time and space and helps to quickly determine the status of the tracked person.

• Journal of Digital Convergence
• /
• v.15 no.3
• /
• pp.287-294
• /
• 2017

This study attempted to develop a beacon scanner based ward monitoring service in order to respond to the new paradigm of medical environment which is trying to introduce ICT technology as medical service to track and manage the spread path of large infectious diseases such as MERS. The study also included beacon hardware development, firmware development for the beacon low-power bluetooth 4.0, and server and web-based dashboard UI development. Using these, we have developed a customized monitoring system that provides functions such as locating patients by location based service and monitoring based on web UI. It is possible to maximize the efficiency of offline hospital services and to value active infection control and patient safety by integrating online technology into the area where online technologies such as beacons are not properly integrated.