• International Journal of Railway
• /
• 제9권2호
• /
• pp.36-40
• /
• 2016

TETRA communication system is very versatile system which can transmit voice + data and packet data optimized. Direct mode operation permits to connect between mobiles when mobile stain is out of coverage of networks. It can be more secure communication channel for railway signaling systems. Railway signaling systems use many of wayside signal equipment, which require many maintenance efforts and budget. Many railway authorities want to reduce and replace the wayside equipment. Radio based signaling systems are one of candidate for replacing the conventional signaling systems. The radio based signaling systems can replace track circuit and wayside signal. The radio systems permit to connect between control centers and trains. The radio systems have to ensure high quality of the connectivity more or equal to the existed track circuits. We studied the application of TETRA systems for railway radio systems for bridging between train control centers and trains. We provide an operation scenario for radio based train control system to ensure the safety require to the existed trains control system and satisfied the existed operational availability. We showed the data transmission speed, maximum bit error rate, and data coding for the radio-based signal system using TETRA systems.

• 제어로봇시스템학회논문지
• /
• 제14권7호
• /
• pp.695-701
• /
• 2008

In this paper, we propose the efficient Doppler removal method using map-based partial-time common intermediate frequency removal technique. In the proposed algorithm, the 2-stage carrier removal process was used. First, the component of common intermediate frequency is removed. Next the component of Doppler was removed with averaging and approximation. For the evaluation of the proposed algorithm, The real-time software GPS L1 C/A-code receiver was implemented. When the proposed algorithms are used, 12 tracking channels with 3 track arm(early, prompt, late) is operated real-time on PC using a Intel Pentium-III 1.0GHz CPU. Also, the requirement of memory was less than 2Mbytes. The real-time software GNSS receiver using the proposed algorithms provides the navigation solution with below 10 meter rms error. Especially, in spited of using the various approximations for implementing the algorithms, the high sensitivity capability (able to track the weak signal with -159dBm) was achieved.

• 한국통신학회논문지
• /
• 제19권8호
• /
• pp.1587-1594
• /
• 1994

피지 예측기는 강인한 트리 부호화기에서 가장 중요한 부분 중에 하나이다. 피치 예측기는 역방향으로 블록 적용 방법과 회귀적인 방법이 결합되어 구성되어진다. 부호화기의 전송에러에 대한 성능을 개선하고 입력 음성의 피치주기의 변화를 추적하기 위해 피치 예측기의 스무더를 부가하는 방법을 제시한다. 3개의 탭을 갖는 스무더는 고정된 계수를 가지거나 피치 합성기의 출력신호의 자기상관 함수에 따라 변화되는 가계변수를 가질 수 있다. 피치 예측기에 스무더의 부가는 한 블록 내에서의 피치주기의 변화를 추적할 수 있고 채널에러에 대한 영향도 줄일 수 있다.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.151-155
• /
• 2008

KHST(Korean High Speed Train) has been utilized the total measurement system which evaluates the efficiency and a breakdown of the vehicle and it's results effect to secure reliability of the vehicle. Generally KHST has been received pulse signals from the wheel. It calculates the travel distance after counter the signals to confirm location information of the vehicle. However, there is a limit to measure the location of the vehicle due to slip, slide and the wheel attrition. We have developed a new measurement system by using GPS to complement those errors. In general, GPS receivers are composed of an antenna, tuned to the frequencies transmitted by the satellites, receiver-processors, and a highly-stable clock The GPS mounted on the roof of TT4 in KHST receives a signal from the RS232 communication port. It is connected to the network system in TT3 after converting with TCPIP communication. It is able to track the position of vehicle and synchronize the signal from different measurement system simultaneously. Therefore it is able to chase the fault occurrence, track inspection and electrical interruption at real-time situation more accurately. There is not an error coursed by vehicle conditions such as slip and the slide.

• Geomechanics and Engineering
• /
• 제30권3호
• /
• pp.273-280
• /
• 2022

A certain amount of random vibration excitation to subway track is caused by subway operation. This excitation is transmitted through track foundation, tunnel, soil medium, and ground building to the ground and ground structure, causing vibration. The vibration affects ground building. In this study, the results of ANSYS numerical simulation was used to establish back-propagation (BP) neural network model. Moreover, a back-propagation neural network model consisting of five input neurons, one hidden layer, 11 hidden-layer neurons, and three output neurons was used to analyze and calculate the vertical Z-vibration level of New Capital's ground buildings of Qingdao Metro phase I Project (Line M3). The Z-vibration level under different working conditions was calculated from monolithic roadbed, steel-spring floating slab roadbed, and rubber-pad floating slab roadbed under the working condition of center point of 0-100 m. The steel-spring floating slab roadbed was used in the New Capital area to monitor the subway operation vibration in this area. Comparing the monitoring and prediction results, it was found that the prediction results have a good linear relationship with lower error. The research results have good reference and guiding significance for predicting vibration caused by subway operation.

• 한국통신학회논문지
• /
• 제19권11호
• /
• pp.2094-2105
• /
• 1994

본 논문은 레이돈(Radon) 변환식으로부터 유도된 투사 근거 허프(Hough) 변환 방식을 사용하여 시간연속 영상상의 이동물체의 궤적을 추정하는 기법을 제안한다. 이때 이동비행물체는 시간연속되는 각 영상 프레임에 몇 개의 화소로 나타나며 그 궤적은 삼차원 직선으로 간주한다. 근래에 제시된 방법들은 합성영상 입단일 궤적도면을 여러 종류의 허프변환 방식을 사용하여 그 궤적을 추정하여 왔으나 본 논문의 방식은 시간연속 영상을 여러 방향에서 투사하여 얻어지는 이차원적 비행체 궤적 지식을 효과적으로 비행체 궤적 재구성에 이용함으로 비행체 탐지 능력은 물론 궤적 추정 능력을 향상하였다. 아울러 투사 근거 허프 변환방식을 평가, 사정하기 위하여 영상 공간의 소음 등으로 야기된 투사 공간상의 허프 파라미터의 추정 error를 분석, 유도하였다. HiCamps라 명칭된 실제 적외선 시간연속 영상 데이타를 대상으로 시뮬레이션한 결과 비행체 궤적 추정이 아주 낮은 SNR 에서도 가능함을 보여준다.

• 한국시뮬레이션학회논문지
• /
• 제23권4호
• /
• pp.41-49
• /
• 2014

능동 합성개구면소나에 의한 해저부설 소형물체 탐지처리 기술은 공간적 제약을 받는 소형 무인화 시스템에서 짧은 센서어레이 사용이 가능하므로 개구면 합성처리에 의해 탐지성능을 올릴 수가 있다. 하지만 플렛폼의 정속도 직선기동에 의한 제한조건은 여러 가지 외부 환경요인과 정확한 위상차 합성 처리에 있어서 많은 오차를 유발하게 된다. 본 연구에서는 이러한 시스템에 탑재되는 능동형 합성개구면처리에 대한 적용 가능성을 분석하고, 전용 시뮬레이터를 구성하여 진행경로 변동에 의해 발생되는 위상차 부정합에 따른 탐지해상도 성능변화를 비교 검토하고자 한다. 시뮬레이션은 코히어런트 초점처리 모델에 경로변동 모듈을 추가하여 실행하였으며, 결과에서 알 수 있듯이 합성개구면처리에 의한 해저 소형물체 탐지성능은 플렛폼의 경로변동에 의한 위상차 부정합 및 S/N비 변화에 의해 많은 변화가 있음을 알 수 있었다.

• 한국안전학회지
• /
• 제28권4호
• /
• pp.1-7
• /
• 2013

Train accidents can be directly connected to fatal accidents-collision, derailment, Fire, railway crossing accidents-resulting in tremendous human casualties. First of all, the railway derailment is not only related to most of railway accidents but also it can lead to much more catastrophic accompanying train overtured than other factors. Therefore, it is most important factor to ensure railway safety. some foreign countries have applied to the detector machines(e.g., ultrasonic detector car, sleep mode, current detector, optical sensing, optical fiber). Since it was developed in order to prevent train from being derailed. In korea, the existing track method has been used to monitor rail condition using track circuit. However, we found out it impossible for Communication Based Train Control system(CBTC), recent technology to detect rail condition using balise(data transmission devices) without no track circuit. For this reason, it is needed instantly to develop real-time monitoring system used to detect broken rails. Firstly, this paper presents domestic and international statues analysis of rail breaks technology. Secondly, the composition and the characteristics of the real-time monitoring system. Finally, the evidence that this system could assumed the location and type of broken rails was proved by the experiment of prototype and operation line tests. We concluded that this system can detect rail break section in which error span exist within${\pm}1m$.

• Journal of Astronomy and Space Sciences
• /
• 제36권1호
• /
• pp.35-43
• /
• 2019

The Optical Wide-field patroL-Network (OWL-Net) is a global optical network for Space Situational Awareness in Korea. The primary operational goal of the OWL-Net is to track Low Earth Orbit (LEO) satellites operated by Korea and to monitor the Geostationary Earth Orbit (GEO) region near the Korean peninsula. To obtain dense measurements on LEO tracking, the chopper system was adopted in the OWL-Net's back-end system. Dozens of angle-only measurements can be obtained for a single shot with the observation mode for LEO tracking. In previous work, the reduction process of the LEO tracking data was presented, along with the mechanical specification of the back-end system of the OWL-Net. In this research, we describe an integrity assessment method of time-position matching and verification of results from real observations of LEO satellites. The change rate of the angle of each streak in the shot was checked to assess the results of the matching process. The time error due to the chopper rotation motion was corrected after re-matching of time and position. The corrected measurements were compared with the simulated observation data, which were taken from the Consolidated Prediction File from the International Laser Ranging Service. The comparison results are presented in the In-track and Cross-track frame.

• 대한조선학회논문집
• /
• 제60권4호
• /
• pp.248-255
• /
• 2023

In order to implement the autonomous navigation function, it is essential to track an object within a certain radius of the ship's route. This paper proposes the Multiple Probabilistic Data Association Filter (MPDAF), which can track multiple ships by extending Probabilistic Data Association Filter (PDAF), an existing single object tracking algorithm, using radar data obtained from real marine environments. The proposed MPDAF algorithm was developed to address the problem of tracking multiple objects in a complex environment where there can be significant uncertainty in the number and identification of objects to be tracked. Using real-world radar data provided by the German aerospace center (DLR), it has been verified that the proposed algorithm can track a large number of objects with a small position error.