• Ocean and Polar Research
• /
• v.38 no.3
• /
• pp.171-184
• /
• 2016

In order to assess the level of contamination and identify the priority contaminants in the Busan coast, intensive sediment sampling was conducted and persistent organic pollutants and heavy metals were analyzed. The Sediment Quality Index (SQI) was derived based on the contaminant data by comparing with Sediment Quality Guidelines (SQGs) established in Korea, Canada, and Australia/New Zealand. Toxic contaminants were found to be widely distributed across the coast. Among organic contaminants, PAHs showed the highest concentration, followed by butyltins, nonylphenols, PBDEs, DDTs, PCBs, HCHs and CHLs. Heavy metals were also abundantly detected with the highest concentration of Zn followed by Cu > Cr > Pb > Ni > As > Cd > Hg. Compared to organic contaminants, most heavy metals, except for Cu and Hg, were homogeneously distributed along the coast in a good relationship with total organic carbon of sediment particles. In general, the concentrations of organic compounds and heavy metals were highest at the inner part of harbor areas with a tendency to decline from inside areas to the outside, indicating the high loading of pollutants from harbors. A high exceedance for low-SQGs and high-SQGs was found for TBT, p'-DDT, p,p'-DDD, Cu and Zn. The SQI scores calculated from low-SQGs and high-SQGs were in the range of 18-100 and 54-100, respectively. The inner part of Busan Harbor, Dadaepo Harbor, and Gamcheon Harbor were observed as being regions of concern. Overall, TBT, Cu, and p,p'-DDT were the chemicals most frequently exceeding SQGs and influencing SQI scores.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.1
• /
• pp.1-6
• /
• 2004

Agricultural recycling of livestock wastes by composting has lots of beneficial effects on crop production and soil fertility. Most of composts are made from pig manure and water content controller such as saw dust, bark, rice hulls etc. by aerobic processing. But the insufficient supply of saw dust, bark etc. cause the indiscreet use of industrial waste having heavy metals and toxic synthetic chemicals. This research investigated the present quality status of organic by-product fertilizers, and suggested the way of quality interpretation under the statistical approaches based on median, mean and weighted average value. Since the data of one hundred of samples for heavy metal contents (Cd, Pb, Cu, and Cr) and OM/N showed extremely left-skewed distribution, the median was more useful than the mean in representing the characteristics of distribiition for each items. The weighted average value will be a useful index for the quality based on the total amount of producing.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.8
• /
• pp.459-467
• /
• 2016

In order to assess the pollution status and distribution characteristics of PM and PM-bound species, PM10 samples were collected using mini-volume air sampler at the subway cabin in Daejeon city. Measurements of about 24 elements including toxic metals (e.g., As, Cr, Mn, V, Zn) in PM10 were made by instrumental neutron activation analysis and X-ray fluorescence. The average PM10 concentration was $59.3{\pm}14.5{\mu}g/m^3$ in the subway cabin with a range of 42.2 to $97.4{\mu}g/m^3$, while the associated elemental concentrations were varied in the range of $10^{-3}$ to $10^5ng/m^3$. It was found that the concentration of Fe ($12.5{\mu}g/m^3$) was substantially higher than any other element. The Fe concentration was apportioned by about 20% of the PM10 concentration. The results of factor analysis indicate that there are no more than six sources in the cabin (e.g., brake-nonferrous metal particle, resuspended rail dust, fuel combustion, vehicle exhaust, black carbon, Cr-related).

• Journal of Environmental Policy
• /
• v.7 no.1
• /
• pp.53-79
• /
• 2008

In this study, we conducted a comprehensive study to analyze the environmental behavior of airborne Ni for the proper establishment of basic control tactics based on the metal concentration data sets collected from the major cities in Korea for the 14 year period(1991 through 2004). The mean concentration of Ni determined from all cities during the entire study period varied from as little as 7.38+6.70 ng $m^3$(Won Ju) to the maximum of 41.4+26.2 ng $m^3$ in a highly industrialized city of An San. However, the mean concentrations of Ni from most cities generally fell in the range of 10 to 20 ng $m^3$. When the Ni concentration data in all cities are compared between the former half(1991 to 1997) and the latter half period(1998 to 2004), a reduction in its concentration levels was seen dominantly between the two study period. Comparison of seasonal patterns generally indicated the enhanced concentrations of Ni during spring/winter relative to summer/fall term. The overall results of this study suggest that the source processes of Ni are diverse enough to exhibit moderately diverse patterns between different cities. Considering that relative enhancement in Ni levels is observed from most of industrial and/or large scale cities, a development of adequate control tactics for Ni is highly desirable.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.599-610
• /
• 2001

Due to an increasing interest in esthetics and concerns about toxic and allergic reactions to certain alloys, patients and dentists have been looking for metal-free tooth-colored restorations. Recent improvement in technology of new all-ceramic materials and composite materials has broadened the options for esthetic single crown restorations. The aim of this investigation was to study the fracture strength of the metal-free posterior single crowns fabricated using two recently introduced systems, Empress 2 ceramic and Targis-Vectris. Forty premolar-shaped stainless steel dies with the 1mm-wide circumferential shoulder were prepared. Ten cylindrical crowns having a diameter of 8.0mm and total height of 7.5mm were fabricated for each crown system respectively(PFM, Empress staining technique, Empress 2 layering technique, and Targis- Vectris). The crowns were filled with cement and placed on the stainless steel dies with firm finger pressure. The crowns were then stored in distilled water at room temperature for 24 hours before testing. The crowns were tested for fracture strength in an Instron universal testing machine (Instron 6022). With a crosshead speed of 1mm/min the center of the occlusal surface of the crown was loaded using a 4-mm-diameter stainless steel ball until fracture occurred. The fracture surfaces of the crowns were gold coated and examined using scanning electron microscopy(Jeol JSM-840 Joel Ltd., Akishima, Tokyo, Japan). Within the parameters of this study the following conclusions were drawn: 1. The mean fracture strength for PFM crowns was 5829(${\pm}906$)N; for Empress staining technique the fracture strength was 1697(${\pm}604$)N; for Empress 2 Layering technique the fracture strength was 1781N(${\pm}400$)N, and the fracture strength for Targis- Vectris was 3093(${\pm}475$)N. 2. The fracture strength of the PFM crowns was significantly higher than that of the Empress 2 and the Targis-Vectris crowns (P<0.05). 3. The fracture strength of the Targis-Vectris crowns was significantly higher than that of the Empress 2 crowns (P<0.05). 4. No statistical difference was found when Empress staining technique was compared with Empress 2 layering technique. 5. The SEM image of fracture surface of Empress 2 crown showed a very dense microstructure of the lithium disilicate crystals and the SEM image of fracture surface of Targis-Vectris crown showed indentations of Vectris and some fibers tom off from Vectris.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.2
• /
• pp.157-164
• /
• 2009

The metals such as Al, Ag, Au, Cu, Cd, Co, Fe, Ni, Pb, Zn, etc are present at very low concentration in seawater and are classified as so-called trace metals. Whiles some of them are used in metabolism of living organism as a micronutrient, they may show toxic effects on organisms in case of a limited threshold concentration of them Plenty of studies on trace metals have been performed bemuse trace metals have a persistent influence and an adverse effect on marine environment and ecosystem. For long years, when the concentration of trace metals in natural waters such as seawater and fresh water are measured with high precision and accuracy, some systematic errors have been recognized to be present in measurements. Since 1975 in US and European countries, the measured concentration of trace metals in seawater have been found to be lower by factors of 10-1,000 than the previous data of trace metals measurements and the vertical profiles of the measurements have been shown to reflect well-known biological, physical and geochemical processes. These results are attributed to great advances in analytical instrumentation and methodology for trace metals measurements. Precautions against the contamination of samples are required to be taken in the process of sampling, storage, and analysis of samples. However, in Korea, erroneous data of trace metals with regard to ocean and marine environment related survey and investigations are reported The lock of exact understanding and information regarding precautions in sampling, storage and analysis of samples lead to the deterioration of data quality, especially in the analysis of trace metals. The major procedures to obtain the accurate data of trace metals in natural waters are introduced for applying to the study and assessment of marine environments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.167-175
• /
• 2018

Natural gas is a clean fuel that discharges almost no air-contaminating substances. This study examined the simultaneous reduction of $CH_4$ and NOx of NGOC/LNT catalysts for CNG buses related to the improvement of the $de-CH_4/NOx$ performance, focusing mainly on identifying the additive catalysts, loading of the washcoat, stirring time, and types of substrates. The 3wt. % Ni-loaded NGOC generally exhibited superior $CH_4$ reduction performance through $CH_4$ conversion, because Ni is an alkaline, toxic oxide, and exerts a reducing effect on $CH_4$. A excessively small loading resulted in insufficient adsorption capacity of harmful gases, whereasa too high loading of washcoat caused clogging of the substrate cells. In addition, with the economic feasibility of catalysts considered, the appropriate amount of catalyst washcoat loading was estimated to be 124g/L. The NOx conversion rate of the NGOC/LNT catalysts stirred from $200^{\circ}C$ to $550^{\circ}C$ for 5 hours showed 10-15% better performance than the NGOC/LNT catalysts mixed for 2 hours over the entire temperature range. The NGOC/LNT catalysts exhibitedapproximately 20% higher $de-CH_4$ performance on the ceramic substrates than on the metal substrates.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.6015-6022
• /
• 2013

It has been known that there are large amount of nitric acid and valuable metals, copper in the plating waste solution of automobile wheel. As nitric acid and valuable metals are high price and toxic, they should be recovered for economics and environment. Plating waste was extracted with TBP diluted with kerosene. The concentration of nitric acid in aqueous phase was analyzed by titration method by NaOH solution (0.1~1.0N) and the amount of metals by ICP-MS and ICP-AES. The concentration of copper in plating waste were 76,850 mg/L. The concentration of nitric acid in plating waste was 1.02 M. After three step extraction was performed with 50% TBP, each organic phase was stripped three times with distilled water to obtain 48.1% of nitric acid. Purity of final nitric acid was over 99.9% by ICP analysis. After recovery of nitric acid, copper was extracted with various solvent extractors like PC 88A, D2EPHA, LIX 84 and ISE 106. Among these extractors, 92% of copper was recovered by ISE 106 after 1st extraction and 30% $H_2SO_4$ stripping. Copper ion was reduced with $N_2H_4$ to make metal powders, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.2
• /
• pp.93-102
• /
• 2011

In this study, experiments on total digestion and sequential extraction were conducted in order to understand total metal contents, and mobility, bioavaliability and toxicity of metals in marine dredged sediment from Busan New Port. The total concentrations of arsenic and heavy metals in the dredged sediment were relatively low as follows: Al (2.36~2.96 wt.%), As (1.6~3.3 mg/kg), Ba (30.0~33.8 mg/kg), Cd (0.12~0.18 mg/kg), Cr (27.5~35.0 mg/kg), Cu (11.3~15.0 mg/kg), Fe (2.91~3.51 wt.%), Mn (324~408 mg/kg), Ni (18.8~23.8 mg/kg), Pb (23.8~31.3 mg/kg), and Zn (70.0~86.3 mg/kg). In addition, it was found that most of Al (87.5~95.9%), As (74.1~93.8%), Ba (71.8~77.6%), Cr (69.5~94.3%), Cu (50.0~78.7%), Fe (70.8~87.6%), Ni (64.5~75.3%), Pb (53.4~64.3%), and Zn (62.5~81.7%) existed in the residual fraction, meaning that those elements might come from natural sources. On the other hand, Cd and Mn were present mainly in the non-residual fraction. Due to low concentrations of toxic heavy metals and high percentage of residual fraction, it could be possible to reuse the dredged sediment for bricks, pavement base material, etc.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.3
• /
• pp.164-171
• /
• 2014

A highly sensitive and selective non-enzymatic glucose sensor has gained great attention because of simple signal transformation, low-cost, easily handling, and confirming the blood glucose as the representative technology. Until now, glucose sensor has been developed by the immobilization of glucose oxidase (GOx) on the surface of electrodes. However although GOx is quite stable compared with other enzymes, the enzyme-based biosensors are still impacted by various environment factors such as temperature, pH value, humidity, and toxic chemicals. Non-enzymatic sensor for direct detecting glucose is an attractive alternative device to overcome the above drawbacks of enzymatic sensor. Many efforts have been tried for the development of non-enzymatic sensors using various transition metals (Pt, Au, Cu, Ni, etc.), metal alloys (Pt-Pb, Pt-Au, Ni-Pd, etc.), metal oxides, carbon nanotubes and graphene. In this paper, we show that Ni-based nano-particles (NiNPs) exhibit remarkably catalyzing capability for glucose originating from the redox couple of $Ni(OH)_2/NiOOH$ on the surface of ITO electrode in alkaline medium. But, these non-enzymatic sensors are nonselective toward oxidizable species such as ascorbic acid the physiological fluid. So, the anionic polymer was coated on NiNPs electrode preventing the interferences. The oxidation of glucose was highly catalyzed by NiNPs. The catalytically anodic currents were linearly increased in proportion to the glucose concentration over the 0~6.15 mM range at 650 mV versus Ag/AgCl.